From: Viacheslav Mitrofanov Date: Fri, 2 Dec 2022 09:17:59 +0000 (+0300) Subject: net: ipv6: Add IPv6 build options X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=3cc04a3ab2dc45ce23c66a3fa7e2e8a0f0689141;p=u-boot.git net: ipv6: Add IPv6 build options Add options to Makefile and Kconfig file to build IPv6 Series-changes: 3 - Added help for IPv6 support Signed-off-by: Viacheslav Mitrofanov Reviewed-by: Ramon Fried Reviewed-by: Simon Glass --- diff --git a/net/Kconfig b/net/Kconfig index cb600fe5eb..a1ec3f8542 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -190,6 +190,16 @@ config PROT_TCP_SACK This option should be turn on if you want to achieve the fastest file transfer possible. +config IPV6 + bool "IPv6 support" + help + Enable IPv6 support. It includes Neighbour Discovery protocol, ICMPv6 + and auxiliary stuff to make it work. Since it is enabled u-boot + network subsystem can get and handle incoming packets and send packets + through IPv6 network. It allows to use environment variables such as + ip6addr, serverip6. If a u-boot command is capable to parse an IPv6 + address and find it, it will force using IPv6 in the network stack. + endif # if NET config SYS_RX_ETH_BUFFER diff --git a/net/Makefile b/net/Makefile index 4f757a224c..00d6f9ddf0 100644 --- a/net/Makefile +++ b/net/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_DM_MDIO_MUX) += mdio-mux-uclass.o obj-$(CONFIG_NET) += eth_common.o obj-$(CONFIG_CMD_LINK_LOCAL) += link_local.o obj-$(CONFIG_NET) += net.o +obj-$(CONFIG_IPV6) += net6.o obj-$(CONFIG_CMD_NFS) += nfs.o obj-$(CONFIG_CMD_PING) += ping.o obj-$(CONFIG_CMD_PCAP) += pcap.o