From: Tejas Bhumkar Date: Tue, 9 Apr 2024 09:48:26 +0000 (+0530) Subject: configs: zynqmp_kria: Deactivate CONFIG_SPI_FLASH_BAR X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=3a6f440dd3709efa8ea3851e9baf8e774f798fd1;p=u-boot.git configs: zynqmp_kria: Deactivate CONFIG_SPI_FLASH_BAR The Kria board features a recovery application that activates when the FW_EN button is pressed. Upon power-up flash operates in 3B mode, However, the recovery application changes it back to 4B mode. Currently, after a reset, u-boot activates CONFIG_SPI_FLASH_BAR and assumes the flash is in 3B mode. However, there's no code or reset lines connected to the flash that could return it to 3B mode. To resolve this issue, changes were made to disable CONFIG_SPI_FLASH_BAR, which activates 4-byte opcodes. Signed-off-by: Tejas Bhumkar Link: https://lore.kernel.org/r/20240409094826.4131643-1-tejas.arvind.bhumkar@amd.com Signed-off-by: Michal Simek --- diff --git a/configs/xilinx_zynqmp_kria_defconfig b/configs/xilinx_zynqmp_kria_defconfig index 28b28f6841..7167dd4b71 100644 --- a/configs/xilinx_zynqmp_kria_defconfig +++ b/configs/xilinx_zynqmp_kria_defconfig @@ -156,7 +156,6 @@ CONFIG_MMC_HS200_SUPPORT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_DM_MTD=y -CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SPI_FLASH_MTD=y