From: Ashok Reddy Soma Date: Tue, 25 May 2021 12:36:27 +0000 (-0600) Subject: spi: zynqmp_gqspi: Fix write issue X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=2ffa65379885c621a9e53280cde0bc65baa0caa3;p=u-boot.git spi: zynqmp_gqspi: Fix write issue Enable manual start in zynqmp_qspi_fill_gen_fifo(). Also enable GQSPI_IXR_GFNFULL_MASK and check for it instead of GQSPI_IXR_GFEMTY_MASK. Add dummy write to genfifo register in chipselect. Signed-off-by: Ashok Reddy Soma --- diff --git a/drivers/spi/zynqmp_gqspi.c b/drivers/spi/zynqmp_gqspi.c index 17780066ae..fc81b07343 100644 --- a/drivers/spi/zynqmp_gqspi.c +++ b/drivers/spi/zynqmp_gqspi.c @@ -39,6 +39,7 @@ #define GQSPI_IXR_TXFULL_MASK 0x00000008 /* QSPI TX FIFO is full */ #define GQSPI_IXR_RXNEMTY_MASK 0x00000010 /* QSPI RX FIFO Not Empty */ #define GQSPI_IXR_GFEMTY_MASK 0x00000080 /* QSPI Generic FIFO Empty */ +#define GQSPI_IXR_GFNFULL_MASK 0x00000200 /* QSPI GENFIFO not full */ #define GQSPI_IXR_ALL_MASK (GQSPI_IXR_TXNFULL_MASK | \ GQSPI_IXR_RXNEMTY_MASK) @@ -238,9 +239,21 @@ static void zynqmp_qspi_fill_gen_fifo(struct zynqmp_qspi_priv *priv, u32 gqspi_fifo_reg) { struct zynqmp_qspi_regs *regs = priv->regs; + u32 config_reg, ier; int ret = 0; - ret = wait_for_bit_le32(®s->isr, GQSPI_IXR_GFEMTY_MASK, 1, + config_reg = readl(®s->confr); + /* Manual start if needed */ + config_reg |= GQSPI_STRT_GEN_FIFO; + writel(config_reg, ®s->confr); + + /* Enable interrupts */ + ier = readl(®s->ier); + ier |= GQSPI_IXR_GFNFULL_MASK; + writel(ier, ®s->ier); + + /* Wait until the fifo is not full to write the new command */ + ret = wait_for_bit_le32(®s->isr, GQSPI_IXR_GFNFULL_MASK, 1, GQSPI_TIMEOUT, 1); if (ret) printf("%s Timeout\n", __func__); @@ -263,6 +276,9 @@ static void zynqmp_qspi_chipselect(struct zynqmp_qspi_priv *priv, int is_on) debug("GFIFO_CMD_CS: 0x%x\n", gqspi_fifo_reg); + /* Dummy generic FIFO entry */ + zynqmp_qspi_fill_gen_fifo(priv, 0); + zynqmp_qspi_fill_gen_fifo(priv, gqspi_fifo_reg); }