From: Marek Vasut <marex@denx.de>
Date: Tue, 25 Jan 2022 02:46:52 +0000 (+0100)
Subject: regulator: bd718x7: Bypass bogus warnings
X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=1b7f00eb1f239973ef459a3608ab5335011c6ab5;p=u-boot.git

regulator: bd718x7: Bypass bogus warnings

When regulator consumer attempts to set enabled DVS regulator voltage,
the driver aborts with "Only DVS bucks can be changed when enabled".
In case the regulator is already set to specified voltage, do nothing
instead of failing outright.

When regulator consumer attempts to set enables regulator which cannot
be controlled because it is already always enabled, the driver aborts
with -EINVAL. Again, do nothing in such case and return 0, because the
request is really fulfilled, the regulator is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---

diff --git a/drivers/power/regulator/bd71837.c b/drivers/power/regulator/bd71837.c
index 74011d6298..d4f8da80ad 100644
--- a/drivers/power/regulator/bd71837.c
+++ b/drivers/power/regulator/bd71837.c
@@ -306,7 +306,7 @@ static int bd71837_set_enable(struct udevice *dev, bool enable)
 	 * reseted to snvs state. Hence we can't set the state here.
 	 */
 	if (plat->enablemask == HW_STATE_CONTROL)
-		return -EINVAL;
+		return enable ? 0 : -EINVAL;
 
 	if (enable)
 		val = plat->enablemask;
@@ -315,6 +315,38 @@ static int bd71837_set_enable(struct udevice *dev, bool enable)
 			       val);
 }
 
+static int bd71837_get_value(struct udevice *dev)
+{
+	unsigned int reg, range;
+	unsigned int tmp;
+	struct bd71837_plat *plat = dev_get_plat(dev);
+	int i;
+
+	reg = pmic_reg_read(dev->parent, plat->volt_reg);
+	if (((int)reg) < 0)
+		return reg;
+
+	range = reg & plat->rangemask;
+
+	reg &= plat->volt_mask;
+	reg >>= ffs(plat->volt_mask) - 1;
+
+	for (i = 0; i < plat->numranges; i++) {
+		struct bd71837_vrange *r = &plat->ranges[i];
+
+		if (plat->rangemask && ((plat->rangemask & range) !=
+		    r->rangeval))
+			continue;
+
+		if (!vrange_find_value(r, reg, &tmp))
+			return tmp;
+	}
+
+	pr_err("Unknown voltage value read from pmic\n");
+
+	return -EINVAL;
+}
+
 static int bd71837_set_value(struct udevice *dev, int uvolt)
 {
 	unsigned int sel;
@@ -330,6 +362,9 @@ static int bd71837_set_value(struct udevice *dev, int uvolt)
 	 */
 	if (!plat->dvs)
 		if (bd71837_get_enable(dev)) {
+			/* If the value is already set, skip the warning. */
+			if (bd71837_get_value(dev) == uvolt)
+				return 0;
 			pr_err("Only DVS bucks can be changed when enabled\n");
 			return -EINVAL;
 		}
@@ -365,38 +400,6 @@ static int bd71837_set_value(struct udevice *dev, int uvolt)
 			       plat->rangemask, sel);
 }
 
-static int bd71837_get_value(struct udevice *dev)
-{
-	unsigned int reg, range;
-	unsigned int tmp;
-	struct bd71837_plat *plat = dev_get_plat(dev);
-	int i;
-
-	reg = pmic_reg_read(dev->parent, plat->volt_reg);
-	if (((int)reg) < 0)
-		return reg;
-
-	range = reg & plat->rangemask;
-
-	reg &= plat->volt_mask;
-	reg >>= ffs(plat->volt_mask) - 1;
-
-	for (i = 0; i < plat->numranges; i++) {
-		struct bd71837_vrange *r = &plat->ranges[i];
-
-		if (plat->rangemask && ((plat->rangemask & range) !=
-		    r->rangeval))
-			continue;
-
-		if (!vrange_find_value(r, reg, &tmp))
-			return tmp;
-	}
-
-	pr_err("Unknown voltage value read from pmic\n");
-
-	return -EINVAL;
-}
-
 static int bd71837_regulator_probe(struct udevice *dev)
 {
 	struct bd71837_plat *plat = dev_get_plat(dev);