From: Joel Stanley <joel@jms.id.au>
Date: Thu, 23 Jun 2022 09:05:29 +0000 (+0930)
Subject: ARM: dts: ast2500: Update SDHCI nodes
X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=0b2a749bc6573a3e66d339d9d74de30c1ab15c46;p=u-boot.git

ARM: dts: ast2500: Update SDHCI nodes

Match the description used by the Linux kernel, except use scu instead
of syscon as the phandle.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---

diff --git a/arch/arm/dts/ast2500-evb.dts b/arch/arm/dts/ast2500-evb.dts
index 874e042bc4..cc577761fa 100644
--- a/arch/arm/dts/ast2500-evb.dts
+++ b/arch/arm/dts/ast2500-evb.dts
@@ -60,6 +60,10 @@
 	pinctrl-0 = <&pinctrl_mac2link_default &pinctrl_mdio2_default>;
 };
 
+&sdmmc {
+	status = "okay";
+};
+
 &sdhci0 {
 	status = "okay";
 
diff --git a/arch/arm/dts/ast2500-u-boot.dtsi b/arch/arm/dts/ast2500-u-boot.dtsi
index ea60e4c8db..057390fe70 100644
--- a/arch/arm/dts/ast2500-u-boot.dtsi
+++ b/arch/arm/dts/ast2500-u-boot.dtsi
@@ -28,31 +28,6 @@
 		clocks = <&scu ASPEED_CLK_MPLL>;
 		resets = <&rst ASPEED_RESET_SDRAM>;
 	};
-
-	ahb {
-		u-boot,dm-pre-reloc;
-
-		apb {
-			u-boot,dm-pre-reloc;
-
-			sdhci0: sdhci@1e740100 {
-				compatible = "aspeed,ast2500-sdhci";
-				reg = <0x1e740100>;
-				#reset-cells = <1>;
-				clocks = <&scu ASPEED_CLK_SDIO>;
-				resets = <&rst ASPEED_RESET_SDIO>;
-			};
-
-			sdhci1: sdhci@1e740200 {
-				compatible = "aspeed,ast2500-sdhci";
-				reg = <0x1e740200>;
-				#reset-cells = <1>;
-				clocks = <&scu ASPEED_CLK_SDIO>;
-				resets = <&rst ASPEED_RESET_SDIO>;
-			};
-		};
-
-	};
 };
 
 &uart1 {
diff --git a/arch/arm/dts/ast2500.dtsi b/arch/arm/dts/ast2500.dtsi
index ee66ef6704..cea08e6f08 100644
--- a/arch/arm/dts/ast2500.dtsi
+++ b/arch/arm/dts/ast2500.dtsi
@@ -207,6 +207,34 @@
 				reg = <0x1e720000 0x9000>;	// 36K
 			};
 
+			sdmmc: sd-controller@1e740000 {
+				compatible = "aspeed,ast2500-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&scu ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@100 {
+					compatible = "aspeed,ast2500-sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&scu ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@200 {
+					compatible = "aspeed,ast2500-sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&scu ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
 			gpio: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;