From: Robert Marko <robert.marko@sartura.hr>
Date: Tue, 14 May 2024 10:17:52 +0000 (+0200)
Subject: arm: dts: drop downstream IPQ4019 DTSI
X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=0a0fa4efce5d94a30e9cdbc1d6798342b004e9af;p=u-boot.git

arm: dts: drop downstream IPQ4019 DTSI

We want to use OF_UPSTREAM on IPQ40XX as its well supported upstream, so
lets drop our downstream DTSI.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---

diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi
deleted file mode 100644
index f9489e42ea..0000000000
--- a/arch/arm/dts/qcom-ipq4019.dtsi
+++ /dev/null
@@ -1,202 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (c) 2019 Sartura Ltd.
- *
- * Author: Robert Marko <robert.marko@sartura.hr>
- */
-
- /dts-v1/;
-
-#include "skeleton.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/qcom,ipq4019-gcc.h>
-#include <dt-bindings/reset/qcom,ipq4019-reset.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	model = "Qualcomm Technologies, Inc. IPQ4019";
-	compatible = "qcom,ipq4019";
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		spi0 = &blsp1_spi1;
-	};
-
-	reserved-memory {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-
-		smem_mem: smem_region: smem@87e00000 {
-			reg = <0x87e00000 0x080000>;
-			no-map;
-		};
-
-		tz@87e80000 {
-			reg = <0x87e80000 0x180000>;
-			no-map;
-		};
-	};
-
-	smem {
-		compatible = "qcom,smem";
-		memory-region = <&smem_mem>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		gcc: clock-controller@1800000 {
-			compatible = "qcom,gcc-ipq4019";
-			reg = <0x1800000 0x60000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			bootph-all;
-		};
-
-		rng: rng@22000 {
-			compatible = "qcom,prng";
-			reg = <0x22000 0x140>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			status = "disabled";
-		};
-
-		soc_gpios: pinctrl@1000000 {
-			compatible = "qcom,ipq4019-pinctrl";
-			reg = <0x1000000 0x300000>;
-			gpio-controller;
-			gpio-count = <100>;
-			gpio-bank-name="soc";
-			#gpio-cells = <2>;
-			bootph-all;
-		};
-
-		blsp1_uart1: serial@78af000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x78af000 0x200>;
-			clock = <&gcc GCC_BLSP1_UART1_APPS_CLK>;
-			bit-rate = <0xFF>;
-			status = "disabled";
-			bootph-all;
-		};
-
-		blsp1_spi1: spi@78b5000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x78b5000 0x600>;
-			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-			bootph-all;
-		};
-
-		mdio: mdio@90000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "qcom,ipq4019-mdio";
-			reg = <0x90000 0x64>;
-			status = "disabled";
-
-			ethphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-
-			ethphy2: ethernet-phy@2 {
-				reg = <2>;
-			};
-
-			ethphy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-
-			ethphy4: ethernet-phy@4 {
-				reg = <4>;
-			};
-		};
-
-		usb3_ss_phy: ssphy@9a000 {
-			compatible = "qcom,usb-ss-ipq4019-phy";
-			#phy-cells = <0>;
-			reg = <0x9a000 0x800>;
-			reg-names = "phy_base";
-			resets = <&gcc USB3_UNIPHY_PHY_ARES>;
-			reset-names = "por_rst";
-			status = "disabled";
-		};
-
-		usb3_hs_phy: hsphy@a6000 {
-			compatible = "qcom,usb-hs-ipq4019-phy";
-			#phy-cells = <0>;
-			reg = <0xa6000 0x40>;
-			reg-names = "phy_base";
-			resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
-			reset-names = "por_rst", "srif_rst";
-			status = "disabled";
-		};
-
-		usb3: usb3@8af8800 {
-			compatible = "qcom,dwc3";
-			reg = <0x8af8800 0x100>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&gcc GCC_USB3_MASTER_CLK>,
-				 <&gcc GCC_USB3_SLEEP_CLK>,
-				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
-			clock-names = "master", "sleep", "mock_utmi";
-			ranges;
-			status = "disabled";
-
-			dwc3@8a00000 {
-				compatible = "snps,dwc3";
-				reg = <0x8a00000 0xf8000>;
-				phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "host";
-				maximum-speed = "super-speed";
-				snps,dis_u2_susphy_quirk;
-			};
-		};
-
-		usb2_hs_phy: hsphy@a8000 {
-			compatible = "qcom,usb-hs-ipq4019-phy";
-			#phy-cells = <0>;
-			reg = <0xa8000 0x40>;
-			reg-names = "phy_base";
-			resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
-			reset-names = "por_rst", "srif_rst";
-			status = "disabled";
-		};
-
-		usb2: usb2@60f8800 {
-			compatible = "qcom,dwc3";
-			reg = <0x60f8800 0x100>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&gcc GCC_USB2_MASTER_CLK>,
-				 <&gcc GCC_USB2_SLEEP_CLK>,
-				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
-			clock-names = "master", "sleep", "mock_utmi";
-			ranges;
-			status = "disabled";
-
-			dwc3@6000000 {
-				compatible = "snps,dwc3";
-				reg = <0x6000000 0xf8000>;
-				phys = <&usb2_hs_phy>;
-				phy-names = "usb2-phy";
-				dr_mode = "host";
-				maximum-speed = "high-speed";
-				snps,dis_u2_susphy_quirk;
-			};
-		};
-	};
-};