From 9c4b0131d1d06dc87cecd08f065ec9b5c0f08b0f Mon Sep 17 00:00:00 2001
From: Tom Rini <trini@konsulko.com>
Date: Tue, 19 Mar 2019 07:14:37 -0400
Subject: [PATCH] ti: keystone2: Move CONFIG_ISW_ENTRY_ADDR to a common place
The ISW_ENTRY_ADDR Kconfig option under mach-omap2 isn't a SoC specific
notion but rather "where is our previous stage loaded in memory?"
option. Make use of this on ARCH_KEYSTONE rather than SPL_TEXT_BASE for
our HS builds that are not using SPL anyhow.
Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com?
---
arch/arm/Kconfig | 15 +++++++++++++++
arch/arm/mach-omap2/Kconfig | 15 ---------------
configs/k2e_evm_defconfig | 1 +
configs/k2e_hs_evm_defconfig | 1 +
configs/k2g_evm_defconfig | 1 +
configs/k2g_hs_evm_defconfig | 1 +
configs/k2hk_evm_defconfig | 1 +
configs/k2hk_hs_evm_defconfig | 1 +
configs/k2l_evm_defconfig | 1 +
configs/k2l_hs_evm_defconfig | 1 +
include/configs/k2e_evm.h | 4 ----
include/configs/k2g_evm.h | 3 ---
include/configs/k2hk_evm.h | 3 ---
include/configs/k2l_evm.h | 3 ---
include/configs/ti_armv7_keystone2.h | 5 +++--
15 files changed, 26 insertions(+), 30 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2567d7817b..398dbef1cb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1464,6 +1464,21 @@ config TI_SECURE_DEVICE
authenticated) and the code. See the doc/README.ti-secure
file for further details.
+if AM43XX || AM33XX || OMAP54XX || ARCH_KEYSTONE
+config ISW_ENTRY_ADDR
+ hex "Address in memory or XIP address of bootloader entry point"
+ default 0x402F4000 if AM43XX
+ default 0x402F0400 if AM33XX
+ default 0x40301350 if OMAP54XX
+ help
+ After any reset, the boot ROM searches the boot media for a valid
+ boot image. For non-XIP devices, the ROM then copies the image into
+ internal memory. For all boot modes, after the ROM processes the
+ boot image it eventually computes the entry point address depending
+ on the device type (secure/non-secure), boot media (xip/non-xip) and
+ image headers.
+endif
+
source "arch/arm/mach-aspeed/Kconfig"
source "arch/arm/mach-at91/Kconfig"
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 1cac4437d7..d29f1ca0b5 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -167,21 +167,6 @@ config TI_SECURE_EMIF_PROTECTED_REGION_SIZE
using hardware memory firewalls. This value must be smaller than the
TI_SECURE_EMIF_TOTAL_REGION_SIZE value.
-if AM43XX || AM33XX || OMAP54XX
-config ISW_ENTRY_ADDR
- hex "Address in memory or XIP address of bootloader entry point"
- default 0x402F4000 if AM43XX
- default 0x402F0400 if AM33XX
- default 0x40301350 if OMAP54XX
- help
- After any reset, the boot ROM searches the boot media for a valid
- boot image. For non-XIP devices, the ROM then copies the image into
- internal memory. For all boot modes, after the ROM processes the
- boot image it eventually computes the entry point address depending
- on the device type (secure/non-secure), boot media (xip/non-xip) and
- image headers.
-endif
-
source "arch/arm/mach-omap2/omap3/Kconfig"
source "arch/arm/mach-omap2/omap4/Kconfig"
diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig
index 6123daded3..fb006dcda9 100644
--- a/configs/k2e_evm_defconfig
+++ b/configs/k2e_evm_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_KEYSTONE=y
+CONFIG_ISW_ENTRY_ADDR=0xC100000
CONFIG_SYS_TEXT_BASE=0xC000000
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
diff --git a/configs/k2e_hs_evm_defconfig b/configs/k2e_hs_evm_defconfig
index 11c9fda985..449e66452e 100644
--- a/configs/k2e_hs_evm_defconfig
+++ b/configs/k2e_hs_evm_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_KEYSTONE=y
+CONFIG_ISW_ENTRY_ADDR=0xC100000
CONFIG_TI_SECURE_DEVICE=y
CONFIG_SYS_TEXT_BASE=0xC000060
CONFIG_TI_COMMON_CMD_OPTIONS=y
diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig
index f2c1f5d826..38db43e1c0 100644
--- a/configs/k2g_evm_defconfig
+++ b/configs/k2g_evm_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_KEYSTONE=y
+CONFIG_ISW_ENTRY_ADDR=0xC0A0000
CONFIG_SYS_TEXT_BASE=0xC000000
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
diff --git a/configs/k2g_hs_evm_defconfig b/configs/k2g_hs_evm_defconfig
index 990c7f6317..9c7e3ca3ec 100644
--- a/configs/k2g_hs_evm_defconfig
+++ b/configs/k2g_hs_evm_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_TI_SECURE_DEVICE=y
+CONFIG_ISW_ENTRY_ADDR=0xC0A0000
CONFIG_SYS_TEXT_BASE=0xC000060
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_TARGET_K2G_EVM=y
diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig
index 6835874384..39aa9336f4 100644
--- a/configs/k2hk_evm_defconfig
+++ b/configs/k2hk_evm_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_KEYSTONE=y
+CONFIG_ISW_ENTRY_ADDR=0xC200000
CONFIG_SYS_TEXT_BASE=0xC000000
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
diff --git a/configs/k2hk_hs_evm_defconfig b/configs/k2hk_hs_evm_defconfig
index e14f901fb7..94bc70a82d 100644
--- a/configs/k2hk_hs_evm_defconfig
+++ b/configs/k2hk_hs_evm_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_KEYSTONE=y
+CONFIG_ISW_ENTRY_ADDR=0xC200000
CONFIG_TI_SECURE_DEVICE=y
CONFIG_SYS_TEXT_BASE=0xC000060
CONFIG_TI_COMMON_CMD_OPTIONS=y
diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig
index 0e2f73acd9..c37a0ce519 100644
--- a/configs/k2l_evm_defconfig
+++ b/configs/k2l_evm_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_KEYSTONE=y
+CONFIG_ISW_ENTRY_ADDR=0xC100000
CONFIG_SYS_TEXT_BASE=0xC000000
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
diff --git a/configs/k2l_hs_evm_defconfig b/configs/k2l_hs_evm_defconfig
index 1f7a93e5a9..443758cab5 100644
--- a/configs/k2l_hs_evm_defconfig
+++ b/configs/k2l_hs_evm_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_KEYSTONE=y
+CONFIG_ISW_ENTRY_ADDR=0xC100000
CONFIG_TI_SECURE_DEVICE=y
CONFIG_SYS_TEXT_BASE=0xC000060
CONFIG_TI_COMMON_CMD_OPTIONS=y
diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h
index 2c0e4cbe92..547127490c 100644
--- a/include/configs/k2e_evm.h
+++ b/include/configs/k2e_evm.h
@@ -40,10 +40,6 @@
#include <configs/ti_armv7_keystone2.h>
-/* SPL SPI Loader Configuration */
-#define CONFIG_SPL_TEXT_BASE 0x0c100000
-
-
#define SPI_MTD_PARTS KEYSTONE_SPI0_MTD_PARTS
/* NAND Configuration */
diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h
index b1aec98a37..3ec5a5acf5 100644
--- a/include/configs/k2g_evm.h
+++ b/include/configs/k2g_evm.h
@@ -72,9 +72,6 @@
"bootm ${fit_loadaddr}#${name_fdt}"
#endif
-/* SPL SPI Loader Configuration */
-#define CONFIG_SPL_TEXT_BASE 0x0c0a0000
-
/* NAND Configuration */
#define CONFIG_SYS_NAND_PAGE_2K
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index 0b909a1bf6..d4f2e96bab 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -40,9 +40,6 @@
#include <configs/ti_armv7_keystone2.h>
-/* SPL SPI Loader Configuration */
-#define CONFIG_SPL_TEXT_BASE 0x0c200000
-
#define SPI_MTD_PARTS KEYSTONE_SPI0_MTD_PARTS
/* NAND Configuration */
diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h
index 59e6b09673..cfdb36e2d7 100644
--- a/include/configs/k2l_evm.h
+++ b/include/configs/k2l_evm.h
@@ -40,9 +40,6 @@
#include <configs/ti_armv7_keystone2.h>
-/* SPL SPI Loader Configuration */
-#define CONFIG_SPL_TEXT_BASE 0x0c100000
-
#define SPI_MTD_PARTS KEYSTONE_SPI0_MTD_PARTS
/* NAND Configuration */
diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 52638cef4b..eeca085f9f 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -22,7 +22,7 @@
/* Memory Configuration */
#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000
#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE - \
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_ISW_ENTRY_ADDR - \
GENERATED_GBL_DATA_SIZE)
#ifdef CONFIG_SYS_MALLOC_F_LEN
@@ -32,9 +32,10 @@
#endif
/* SPL SPI Loader Configuration */
+#define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR
#define CONFIG_SPL_PAD_TO 65536
#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8)
-#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \
+#define CONFIG_SPL_BSS_START_ADDR (CONFIG_ISW_ENTRY_ADDR + \
CONFIG_SPL_MAX_SIZE)
#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024)
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
--
2.39.5