From 39dca76c34ebd06a1d7f9832598f697ff0dc8127 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 29 Jun 2021 20:53:11 +0300 Subject: [PATCH] arm: dts: ls1028a: enable the switch CPU port for the LS1028A-QDS Due to an upstream change, the ls1028a.dtsi bindings for the mscc_felix switch got accepted with all ports disabled by default and with no link to the DSA master - this needs to be done on a per board basis. Note that enetc-2 is not currently disabled in the ls1028a.dtsi, but presumably at some point it might become. Explicitly enable it in the QDS device trees anyway, to proactively avoid issues when that happens. Fixes: a7fdac7e2a2a ("arm: dts: ls1028a: define QDS networking protocol combinations") Signed-off-by: Vladimir Oltean Reviewed-by: Ramon Fried --- arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi | 9 +++++++++ arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi | 9 +++++++++ arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi | 9 +++++++++ arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi | 9 +++++++++ arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi | 9 +++++++++ arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi | 9 +++++++++ arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi | 9 +++++++++ arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi | 9 +++++++++ 8 files changed, 72 insertions(+) diff --git a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi index fb1836a8ae..5a0f060c16 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi @@ -20,6 +20,10 @@ #include "fsl-sch-30841.dtsi" }; +&enetc2 { + status = "okay"; +}; + &mscc_felix { status = "okay"; }; @@ -47,3 +51,8 @@ phy-mode = "sgmii-2500"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; }; + +&mscc_felix_port4 { + ethernet = <&enetc2>; + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi index 1d02a3e11d..39a83e10c4 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi @@ -9,6 +9,10 @@ #include "fsl-sch-30841.dtsi" }; +&enetc2 { + status = "okay"; +}; + &mscc_felix { status = "okay"; }; @@ -24,3 +28,8 @@ phy-mode = "sgmii-2500"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; }; + +&mscc_felix_port4 { + ethernet = <&enetc2>; + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi index c92dd1bd2e..021fe3fbc6 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi @@ -34,6 +34,10 @@ #include "fsl-sch-24801.dtsi" }; +&enetc2 { + status = "okay"; +}; + &mscc_felix { status = "okay"; }; @@ -61,3 +65,8 @@ phy-mode = "sgmii"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>; }; + +&mscc_felix_port4 { + ethernet = <&enetc2>; + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi index 941f7472eb..b6704d8089 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi @@ -19,6 +19,10 @@ #include "fsl-sch-24801.dtsi" }; +&enetc2 { + status = "okay"; +}; + &mscc_felix { status = "okay"; }; @@ -46,3 +50,8 @@ phy-mode = "sgmii"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>; }; + +&mscc_felix_port4 { + ethernet = <&enetc2>; + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi index 7e483e656e..8c10897e56 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi @@ -19,6 +19,10 @@ #include "fsl-sch-30841.dtsi" }; +&enetc2 { + status = "okay"; +}; + &mscc_felix { status = "okay"; }; @@ -46,3 +50,8 @@ phy-mode = "usxgmii"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>; }; + +&mscc_felix_port4 { + ethernet = <&enetc2>; + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi index 49fffdb9cb..1d800dacef 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi @@ -13,6 +13,10 @@ #include "fsl-sch-28021.dtsi" }; +&enetc2 { + status = "okay"; +}; + &mscc_felix { status = "okay"; }; @@ -40,3 +44,8 @@ phy-mode = "qsgmii"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0b}>; }; + +&mscc_felix_port4 { + ethernet = <&enetc2>; + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi index 8347462f4c..1fb2cdf0c2 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi @@ -9,6 +9,10 @@ #include "fsl-sch-30842.dtsi" }; +&enetc2 { + status = "okay"; +}; + &mscc_felix { status = "okay"; }; @@ -18,3 +22,8 @@ phy-mode = "sgmii-2500"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>; }; + +&mscc_felix_port4 { + ethernet = <&enetc2>; + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi index 6be3b5094c..2333f74e5a 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi @@ -9,6 +9,10 @@ #include "fsl-sch-30842.dtsi" }; +&enetc2 { + status = "okay"; +}; + &mscc_felix { status = "okay"; }; @@ -18,3 +22,8 @@ phy-mode = "sgmii-2500"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@60/phy@02}>; }; + +&mscc_felix_port4 { + ethernet = <&enetc2>; + status = "okay"; +}; -- 2.39.5