From: Rasmus Villemoes Date: Thu, 3 Oct 2024 14:10:27 +0000 (+0200) Subject: serial: do not overwrite not-consumed characters in rx buffer X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=f4e7a399480c453df055b521ceda4c57ffb8e99e;p=u-boot.git serial: do not overwrite not-consumed characters in rx buffer Before the previous patch, pasting a string of length x > CONFIG_SERIAL_RX_BUFFER_SIZE results in getting the last (x%CONFIG_SERIAL_RX_BUFFER_SIZE) characters from that string. With the previous patch, one instead gets the last CONFIG_SERIAL_RX_BUFFER_SIZE characters repeatedly until the ->rd_ptr catches up. Both behaviours are counter-intuitive, and happen because the code that checks for a character available from the hardware does not account for whether there is actually room in the software buffer to receive it. Fix that by adding such accounting. This also brings the software buffering more in line with how most hardware FIFOs behave (first received characters are kept, overflowing characters are dropped). Signed-off-by: Rasmus Villemoes Reviewed-by: Simon Glass --- diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index 05fe9645be..28d7a202af 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -328,10 +328,11 @@ static int __serial_tstc(struct udevice *dev) static int _serial_tstc(struct udevice *dev) { struct serial_dev_priv *upriv = dev_get_uclass_priv(dev); - uint wr; + uint wr, avail; - /* Read all available chars into the RX buffer */ - while (__serial_tstc(dev)) { + /* Read all available chars into the RX buffer while there's room */ + avail = CONFIG_SERIAL_RX_BUFFER_SIZE - (upriv->wr_ptr - upriv->rd_ptr); + while (avail-- && __serial_tstc(dev)) { wr = upriv->wr_ptr++ % CONFIG_SERIAL_RX_BUFFER_SIZE; upriv->buf[wr] = __serial_getc(dev); }