From: Caleb Connolly Date: Sat, 12 Oct 2024 13:57:20 +0000 (+0200) Subject: qcom_defconfig: enable capsule update support X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=e88089e4f134435f0e49f6edc73eff2ce0db90e1;p=u-boot.git qcom_defconfig: enable capsule update support Enable all the necessary options for capsule updates to work, as well as a few additional EFI features. Capsule updates themselves are only enabled for the RB3 Gen 2, since the exact details on where to flash U-Boot (or how to handle multiple boot methods) has not been finalised for other boards. Reviewed-by: Neil Armstrong Reviewed-by: Ilias Apalodimas Signed-off-by: Caleb Connolly --- diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig index 5ddc5ab3ef..ba26924da1 100644 --- a/configs/qcm6490_defconfig +++ b/configs/qcm6490_defconfig @@ -19,3 +19,9 @@ CONFIG_TEXT_BASE=0x9fc00000 CONFIG_REMAKE_ELF=y CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs6490-rb3gen2" + +# Enable capsule updates +CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y +CONFIG_EFI_CAPSULE_ON_DISK=y +CONFIG_EFI_IGNORE_OSINDICATIONS=y +CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig index d98e48e4a9..30f7b1c773 100644 --- a/configs/qcom_defconfig +++ b/configs/qcom_defconfig @@ -21,12 +21,14 @@ CONFIG_LOG_DEFAULT_LEVEL=4 # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_BOOTMENU=y +CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_EEPROM=y CONFIG_SYS_I2C_EEPROM_BUS=2 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 # CONFIG_CMD_BIND is not set CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -34,6 +36,7 @@ CONFIG_CMD_UFS=y CONFIG_CMD_USB=y CONFIG_CMD_CAT=y CONFIG_CMD_BMP=y +CONFIG_CMD_EFIDEBUG=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_LOG=y CONFIG_OF_LIVE=y @@ -52,6 +55,9 @@ CONFIG_CLK_QCOM_SM8250=y CONFIG_CLK_QCOM_SM8550=y CONFIG_CLK_QCOM_SM8650=y CONFIG_CLK_QCOM_SC7280=y +CONFIG_DFU_MMC=y +CONFIG_DFU_SCSI=y +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000 CONFIG_MSM_GPIO=y CONFIG_QCOM_PMIC_GPIO=y CONFIG_DM_I2C=y