From: Neil Armstrong Date: Wed, 10 Apr 2024 15:59:43 +0000 (+0200) Subject: gpio: qcom_pmic_gpio: add support for pm8550-gpio X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=b6f1d3353292af1a7b0d8cc239a8a282de148c9b;p=u-boot.git gpio: qcom_pmic_gpio: add support for pm8550-gpio Add support for PM8550 GPIO controller variant, keep read-only until the GPIO and Pinctrl setup is fixed for new PMICs. Signed-off-by: Neil Armstrong Signed-off-by: Caleb Connolly --- diff --git a/drivers/gpio/qcom_pmic_gpio.c b/drivers/gpio/qcom_pmic_gpio.c index 14a8210522..dfb70faf94 100644 --- a/drivers/gpio/qcom_pmic_gpio.c +++ b/drivers/gpio/qcom_pmic_gpio.c @@ -35,6 +35,8 @@ #define REG_SUBTYPE_GPIOC_8CH 0xd #define REG_SUBTYPE_GPIO_LV 0x10 #define REG_SUBTYPE_GPIO_MV 0x11 +#define REG_SUBTYPE_GPIO_LV_VIN2 0x12 +#define REG_SUBTYPE_GPIO_MV_VIN3 0x13 #define REG_STATUS 0x08 #define REG_STATUS_VAL_MASK 0x1 @@ -322,9 +324,20 @@ static int qcom_gpio_probe(struct udevice *dev) return log_msg_ret("bad type", -ENXIO); val = pmic_reg_read(plat->pmic, plat->pid + REG_SUBTYPE); - if (val != REG_SUBTYPE_GPIO_4CH && val != REG_SUBTYPE_GPIOC_4CH && - val != REG_SUBTYPE_GPIO_LV && val != REG_SUBTYPE_GPIO_MV) + switch (val) { + case REG_SUBTYPE_GPIO_4CH: + case REG_SUBTYPE_GPIOC_4CH: + plat->lv_mv_type = false; + break; + case REG_SUBTYPE_GPIO_LV: + case REG_SUBTYPE_GPIO_MV: + case REG_SUBTYPE_GPIO_LV_VIN2: + case REG_SUBTYPE_GPIO_MV_VIN3: + plat->lv_mv_type = true; + break; + default: return log_msg_ret("bad subtype", -ENXIO); + } plat->lv_mv_type = val == REG_SUBTYPE_GPIO_LV || val == REG_SUBTYPE_GPIO_MV; @@ -351,6 +364,7 @@ static const struct udevice_id qcom_gpio_ids[] = { { .compatible = "qcom,pm8994-gpio" }, /* 22 GPIO's */ { .compatible = "qcom,pm8998-gpio", .data = QCOM_PMIC_QUIRK_READONLY }, { .compatible = "qcom,pms405-gpio" }, + { .compatible = "qcom,pm8550-gpio", .data = QCOM_PMIC_QUIRK_READONLY }, { } };