From: Chris Morgan <macromorgan@hotmail.com>
Date: Mon, 13 Feb 2023 22:27:34 +0000 (-0600)
Subject: gpio: gpio-rockchip: parse gpio-ranges for bank id
X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=904b8700f81cbc6a49c4f693744a4d2c6c393d6d;p=u-boot.git

gpio: gpio-rockchip: parse gpio-ranges for bank id

Use the new devicetree property of gpio-ranges to determine the GPIO
bank ID. Preserve the "old" way of doing things too, so that boards
can be migrated and tested gradually (I only have a 3566 and 3326 to
test).

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/drivers/gpio/rk_gpio.c b/drivers/gpio/rk_gpio.c
index 68f30157a9..f7ad4d68b4 100644
--- a/drivers/gpio/rk_gpio.c
+++ b/drivers/gpio/rk_gpio.c
@@ -142,6 +142,7 @@ static int rockchip_gpio_probe(struct udevice *dev)
 {
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
 	struct rockchip_gpio_priv *priv = dev_get_priv(dev);
+	struct ofnode_phandle_args args;
 	char *end;
 	int ret;
 
@@ -150,9 +151,22 @@ static int rockchip_gpio_probe(struct udevice *dev)
 	if (ret)
 		return ret;
 
-	uc_priv->gpio_count = ROCKCHIP_GPIOS_PER_BANK;
-	end = strrchr(dev->name, '@');
-	priv->bank = trailing_strtoln(dev->name, end);
+	/*
+	 * If "gpio-ranges" is present in the devicetree use it to parse
+	 * the GPIO bank ID, otherwise use the legacy method.
+	 */
+	ret = ofnode_parse_phandle_with_args(dev_ofnode(dev),
+					     "gpio-ranges", NULL, 3,
+					     0, &args);
+	if (!ret || ret != -ENOENT) {
+		uc_priv->gpio_count = args.args[2];
+		priv->bank = args.args[1] / args.args[2];
+	} else {
+		uc_priv->gpio_count = ROCKCHIP_GPIOS_PER_BANK;
+		end = strrchr(dev->name, '@');
+		priv->bank = trailing_strtoln(dev->name, end);
+	}
+
 	priv->name[0] = 'A' + priv->bank;
 	uc_priv->bank_name = priv->name;