From: Benjamin Hahn <B.Hahn@phytec.de>
Date: Wed, 17 Jul 2024 05:11:30 +0000 (-0700)
Subject: include: env: phytec: renaming of variables according to bootstd doc
X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=84303dc371fb37c9cbbea124cc341db9ae3162b3;p=u-boot.git

include: env: phytec: renaming of variables according to bootstd doc

Rename existing environment variables according to the bootstd doc.
Renamed variables are fdto_addr, bootenv_addr, fdt_addr.

Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
---

diff --git a/include/env/phytec/overlays.env b/include/env/phytec/overlays.env
index febb991f4f..78721cde65 100644
--- a/include/env/phytec/overlays.env
+++ b/include/env/phytec/overlays.env
@@ -6,32 +6,33 @@
 
 /* Logic to load and apply overlays. Load overlays from bootenv.txt into
  * environment and apply those overlays.
- * The variables bootenv_addr and fdto_addr are board specific. */
+ * The variables bootenv_addr_r and fdtoverlay_addr_r are board specific.
+ * get_cmd can be either tftp or dhcp. */
 
 bootenv=bootenv.txt
-mmc_load_bootenv=load mmc ${mmcdev}:${mmcpart} ${bootenv_addr} ${bootenv}
-mmc_load_overlay=load mmc ${mmcdev}:${mmcpart} ${fdto_addr} ${overlay}
+mmc_load_bootenv=load mmc ${mmcdev}:${mmcpart} ${bootenv_addr_r} ${bootenv}
+mmc_load_overlay=load mmc ${mmcdev}:${mmcpart} ${fdtoverlay_addr_r} ${overlay}
 mmc_apply_overlays=
-	fdt address ${fdt_addr};
+	fdt address ${fdt_addr_r};
 	if test ${no_overlays} = 0; then
 		for overlay in ${overlays};
 		do;
 			if run mmc_load_overlay; then
 				fdt resize ${filesize};
-				fdt apply ${fdto_addr};
+				fdt apply ${fdtoverlay_addr_r};
 			fi;
 		done;
 	fi;
-net_load_bootenv=${get_cmd} ${bootenv_addr} ${bootenv}
-net_load_overlay=${get_cmd} ${fdto_addr} ${overlay}
+net_load_bootenv=${get_cmd} ${bootenv_addr_r} ${bootenv}
+net_load_overlay=${get_cmd} ${fdtoverlay_addr_r} ${overlay}
 net_apply_overlays=
-	fdt address ${fdt_addr};
+	fdt address ${fdt_addr_r};
 	if test ${no_overlays} = 0; then
 		for overlay in ${overlays};
 		do;
 			if run net_load_overlay; then
 				fdt resize ${filesize};
-				fdt apply ${fdto_addr};
+				fdt apply ${fdtoverlay_addr_r};
 			fi;
 		done;
 	fi;