From: Tom Rini Date: Sat, 15 May 2021 01:34:16 +0000 (-0400) Subject: ppc: Remove MPC8313ERDB boards X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=7458f18e5c2c37d22b21c32016f39619f5965454;p=u-boot.git ppc: Remove MPC8313ERDB boards These boards have not been converted to CONFIG_DM_PCI by the deadline. Remove them. Signed-off-by: Tom Rini --- diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 0d24574ecc..e4c6f5d40b 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -16,18 +16,6 @@ config TARGET_CADDY2 bool "Support caddy2" select ARCH_MPC8349 -config TARGET_MPC8313ERDB_NOR - bool "Support MPC8313ERDB_NOR" - select ARCH_MPC8313 - select BOARD_EARLY_INIT_F - select SUPPORT_SPL - -config TARGET_MPC8313ERDB_NAND - bool "Support MPC8313ERDB_NAND" - select ARCH_MPC8313 - select BOARD_EARLY_INIT_F - select SUPPORT_SPL - config TARGET_MPC8315ERDB bool "Support MPC8315ERDB" select ARCH_MPC8315 @@ -291,7 +279,6 @@ config FSL_ELBC bool source "board/esd/vme8349/Kconfig" -source "board/freescale/mpc8313erdb/Kconfig" source "board/freescale/mpc8315erdb/Kconfig" source "board/freescale/mpc8323erdb/Kconfig" source "board/freescale/mpc832xemds/Kconfig" diff --git a/board/freescale/mpc8313erdb/Kconfig b/board/freescale/mpc8313erdb/Kconfig deleted file mode 100644 index b6332a1368..0000000000 --- a/board/freescale/mpc8313erdb/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -if TARGET_MPC8313ERDB_NOR - -config SYS_BOARD - default "mpc8313erdb" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8313ERDB_NOR" - -endif - -if TARGET_MPC8313ERDB_NAND - -config SYS_BOARD - default "mpc8313erdb" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8313ERDB_NAND" - -endif diff --git a/board/freescale/mpc8313erdb/MAINTAINERS b/board/freescale/mpc8313erdb/MAINTAINERS deleted file mode 100644 index 807fb0b6e9..0000000000 --- a/board/freescale/mpc8313erdb/MAINTAINERS +++ /dev/null @@ -1,9 +0,0 @@ -MPC8313ERDB BOARD -#M: - -S: Maintained -F: board/freescale/mpc8313erdb/ -F: include/configs/MPC8313ERDB.h -F: configs/MPC8313ERDB_33_defconfig -F: configs/MPC8313ERDB_66_defconfig -F: configs/MPC8313ERDB_NAND_33_defconfig -F: configs/MPC8313ERDB_NAND_66_defconfig diff --git a/board/freescale/mpc8313erdb/Makefile b/board/freescale/mpc8313erdb/Makefile deleted file mode 100644 index af600ccdbb..0000000000 --- a/board/freescale/mpc8313erdb/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-y := mpc8313erdb.o sdram.o diff --git a/board/freescale/mpc8313erdb/README b/board/freescale/mpc8313erdb/README deleted file mode 100644 index 697cee4c42..0000000000 --- a/board/freescale/mpc8313erdb/README +++ /dev/null @@ -1,111 +0,0 @@ -Freescale MPC8313ERDB Board ------------------------------------------ - -1. Board Switches and Jumpers - - S3 is used to set CONFIG_SYS_RESET_SOURCE. - - To boot the image at 0xFE000000 in NOR flash, use these DIP - switch settings for S3 S4: - - +------+ +------+ - | | | **** | - | **** | | | - +------+ ON +------+ ON - 4321 4321 - (where the '*' indicates the position of the tab of the switch.) - - To boot the image at the beginning of NAND flash, use these - DIP switch settings for S3 S4: - - +------+ +------+ - | * | | *** | - | *** | | * | - +------+ ON +------+ ON - 4321 4321 - (where the '*' indicates the position of the tab of the switch.) - - When booting from NAND, use u-boot-nand.bin, not u-boot.bin. - -2. Memory Map - The memory map looks like this: - - 0x0000_0000 0x07ff_ffff DDR 128M - 0x8000_0000 0x8fff_ffff PCI MEM 256M - 0x9000_0000 0x9fff_ffff PCI_MMIO 256M - 0xe000_0000 0xe00f_ffff IMMR 1M - 0xe200_0000 0xe20f_ffff PCI IO 16M - 0xe280_0000 0xe280_7fff NAND FLASH (CS1) 32K - 0xf000_0000 0xf001_ffff VSC7385 (CS2) 128K - 0xfa00_0000 0xfa00_7fff Board Status/ 32K - LED Control (CS3) - 0xfe00_0000 0xfe7f_ffff NOR FLASH (CS0) 8M - - When booting from NAND, NAND flash is CS0 and NOR flash - is CS1. - -3. Definitions - -3.1 Explanation of NEW definitions in: - - include/configs/MPC8313ERDB.h - - CONFIG_MPC83xx MPC83xx family - CONFIG_MPC831x MPC831x specific - CONFIG_MPC8313ERDB MPC8313ERDB board specific - -4. Compilation - - Assuming you're using BASH (or similar) as your shell: - - export CROSS_COMPILE=your-cross-compiler-prefix- - make distclean - make MPC8313ERDB_XXX_config - (where XXX is: - 33 - 33 MHz oscillator, boot from NOR flash - 66 - 66 MHz oscillator, boot from NOR flash - NAND_33 - 33 MHz oscillator, boot from NAND flash - NAND_66 - 66 MHz oscillator, boot from NAND flash) - make - -5. Downloading and Flashing Images - -5.1 Reflash U-Boot Image using U-Boot - - NOR flash: - - =>run tftpflash - - You may want to try - =>tftpboot $loadaddr $uboot - first, to make sure that the TFTP load will succeed before it - goes ahead and wipes out your current firmware. And of course, - have an alternate means of programming the flash available - if the new U-Boot doesn't boot. - - NAND flash: - - =>tftpboot $loadaddr - =>nand erase 0 0x80000 - =>nand write $loadaddr 0 0x80000 - - ...where 0x80000 is the filesize rounded up to - the next 0x20000 increment. - -5.2 Downloading and Booting Linux Kernel - - Ensure that all networking-related environment variables are set - properly (including ipaddr, serverip, gatewayip (if needed), - netmask, ethaddr, eth1addr, rootpath (if using NFS root), - fdtfile, and bootfile). - - Then, do one of the following, depending on whether you - want an NFS root or a ramdisk root: - - =>run nfsboot - or - =>run ramboot - -6 Notes - - The console baudrate for MPC8313ERDB is 115200bps. diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c deleted file mode 100644 index 3bf5cff1e1..0000000000 --- a/board/freescale/mpc8313erdb/mpc8313erdb.c +++ /dev/null @@ -1,160 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 - * - * Author: Scott Wood - */ - -#include -#include -#include -#include -#if defined(CONFIG_OF_LIBFDT) -#include -#endif -#include -#include -#include -#include -#include -#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD) -#include -#endif -#include - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ -#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - - if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) - gd->flags |= GD_FLG_SILENT; -#endif -#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD) - mpc83xx_gpio_init_f(); -#endif - - return 0; -} - -int board_early_init_r(void) -{ -#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD) - mpc83xx_gpio_init_r(); -#endif - - return 0; -} - -int checkboard(void) -{ - puts("Board: Freescale MPC8313ERDB\n"); - return 0; -} - -#ifndef CONFIG_SPL_BUILD -static struct pci_region pci_regions[] = { - { - .bus_start = CONFIG_SYS_PCI1_MEM_BASE, - .phys_start = CONFIG_SYS_PCI1_MEM_PHYS, - .size = CONFIG_SYS_PCI1_MEM_SIZE, - .flags = PCI_REGION_MEM | PCI_REGION_PREFETCH - }, - { - .bus_start = CONFIG_SYS_PCI1_MMIO_BASE, - .phys_start = CONFIG_SYS_PCI1_MMIO_PHYS, - .size = CONFIG_SYS_PCI1_MMIO_SIZE, - .flags = PCI_REGION_MEM - }, - { - .bus_start = CONFIG_SYS_PCI1_IO_BASE, - .phys_start = CONFIG_SYS_PCI1_IO_PHYS, - .size = CONFIG_SYS_PCI1_IO_SIZE, - .flags = PCI_REGION_IO - } -}; - -void pci_init_board(void) -{ - volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; - volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; - volatile law83xx_t *pci_law = immr->sysconf.pcilaw; - struct pci_region *reg[] = { pci_regions }; - - /* Enable all 3 PCI_CLK_OUTPUTs. */ - clk->occr |= 0xe0000000; - - /* - * Configure PCI Local Access Windows - */ - pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; - - pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; - - mpc83xx_pci_init(1, reg); -} - -/* - * Miscellaneous late-boot configurations - * - * If a VSC7385 microcode image is present, then upload it. -*/ -int misc_init_r(void) -{ - int rc = 0; - -#ifdef CONFIG_VSC7385_IMAGE - if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, - CONFIG_VSC7385_IMAGE_SIZE)) { - puts("Failure uploading VSC7385 microcode.\n"); - rc = 1; - } -#endif - - return rc; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, struct bd_info *bd) -{ - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif - - return 0; -} -#endif -#else /* CONFIG_SPL_BUILD */ -void board_init_f(ulong bootflag) -{ - board_early_init_f(); - ns16550_init((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500), - CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); - puts("NAND boot... "); - timer_init(); - dram_init(); - relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd, - CONFIG_SYS_NAND_U_BOOT_RELOC); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - nand_boot(); -} - -void putc(char c) -{ - if (gd->flags & GD_FLG_SILENT) - return; - - if (c == '\n') - ns16550_putc((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500), '\r'); - - ns16550_putc((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500), c); -} -#endif diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c deleted file mode 100644 index f146ae5d43..0000000000 --- a/board/freescale/mpc8313erdb/sdram.c +++ /dev/null @@ -1,129 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 - * - * Authors: Nick.Spence@freescale.com - * Wilson.Lo@freescale.com - * scottwood@freescale.com - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC -static void resume_from_sleep(void) -{ - u32 magic = *(u32 *)0; - - typedef void (*func_t)(void); - func_t resume = *(func_t *)4; - - if (magic == 0xf5153ae5) - resume(); - - gd->flags &= ~GD_FLG_SILENT; - puts("\nResume from sleep failed: bad magic word\n"); -} -#endif - -/* Fixed sdram init -- doesn't use serial presence detect. - * - * This is useful for faster booting in configs where the RAM is unlikely - * to be changed, or for things like NAND booting where space is tight. - */ -static long fixed_sdram(void) -{ - u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; - -#ifndef CONFIG_SYS_RAMBOOT - volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; - u32 msize_log2 = __ilog2(msize); - - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000; - im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); - im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE; - - /* - * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], - * or the DDR2 controller may fail to initialize correctly. - */ - __udelay(50000); - -#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0) -#warning Chip select bounds is only configurable in 16MB increments -#endif - im->ddr.csbnds[0].csbnds = - ((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | - (((CONFIG_SYS_SDRAM_BASE + msize - 1) >> CSBNDS_EA_SHIFT) & - CSBNDS_EA); - im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; - - /* Currently we use only one CS, so disable the other bank. */ - im->ddr.cs_config[1] = 0; - - im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; - im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; - im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; - -#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC - if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) - im->ddr.sdram_cfg = CONFIG_SYS_SDRAM_CFG | SDRAM_CFG_BI; - else -#endif - im->ddr.sdram_cfg = CONFIG_SYS_SDRAM_CFG; - - im->ddr.sdram_cfg2 = CONFIG_SYS_SDRAM_CFG2; - im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; - im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE_2; - - im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; - sync(); - - /* enable DDR controller */ - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; -#endif - - return msize; -} - -int dram_init(void) -{ - volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbc_t *lbc = &im->im_lbc; - u32 msize; - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) - return -ENXIO; - - /* DDR SDRAM - Main SODIMM */ - msize = fixed_sdram(); - - /* Local Bus setup lbcr and mrtpr */ - lbc->lbcr = (0x00040000 | (0xFF << LBCR_BMT_SHIFT) | 0xF); - /* LB refresh timer prescal, 266MHz/32 */ - lbc->mrtpr = 0x20000000; - sync(); - -#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC - if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) - resume_from_sleep(); -#endif - - /* return total bus SDRAM size(bytes) -- DDR */ - gd->ram_size = msize; - - return 0; -} diff --git a/configs/MPC8313ERDB_33_defconfig b/configs/MPC8313ERDB_33_defconfig deleted file mode 100644 index 07b7c54b7f..0000000000 --- a/configs/MPC8313ERDB_33_defconfig +++ /dev/null @@ -1,169 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFE000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_SYS_CLK_FREQ=33333333 -CONFIG_MPC83xx=y -CONFIG_HIGH_BATS=y -CONFIG_TARGET_MPC8313ERDB_NOR=y -CONFIG_SYSTEM_PLL_FACTOR_5_1=y -CONFIG_CORE_PLL_RATIO_2_1=y -CONFIG_PCI_HOST_MODE_ENABLE=y -CONFIG_PCI_INT_ARBITER1_ENABLE=y -CONFIG_BOOT_MEMORY_SPACE_LOW=y -CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y -CONFIG_TSEC1_MODE_RGMII=y -CONFIG_TSEC2_MODE_RGMII=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="DDR" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_256_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="PCI1_MEM" -CONFIG_BAT1_BASE=0x80000000 -CONFIG_BAT1_LENGTH_256_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="PCI1_MMIO_BASE" -CONFIG_BAT2_BASE=0x90000000 -CONFIG_BAT2_LENGTH_256_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_INHIBITED=y -CONFIG_BAT2_ICACHE_GUARDED=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT5=y -CONFIG_BAT5_NAME="IMMR" -CONFIG_BAT5_BASE=0xE0000000 -CONFIG_BAT5_LENGTH_256_MBYTES=y -CONFIG_BAT5_ACCESS_RW=y -CONFIG_BAT5_ICACHE_INHIBITED=y -CONFIG_BAT5_ICACHE_GUARDED=y -CONFIG_BAT5_DCACHE_INHIBITED=y -CONFIG_BAT5_DCACHE_GUARDED=y -CONFIG_BAT5_USER_MODE_VALID=y -CONFIG_BAT5_SUPERVISOR_MODE_VALID=y -CONFIG_BAT6=y -CONFIG_BAT6_NAME="STACK_IN_DCACHE" -CONFIG_BAT6_BASE=0xF0000000 -CONFIG_BAT6_LENGTH_256_MBYTES=y -CONFIG_BAT6_ACCESS_RW=y -CONFIG_BAT6_ICACHE_GUARDED=y -CONFIG_BAT6_DCACHE_GUARDED=y -CONFIG_BAT6_USER_MODE_VALID=y -CONFIG_BAT6_SUPERVISOR_MODE_VALID=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xFE000000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_16_MBYTES=y -CONFIG_LBLAW1=y -CONFIG_LBLAW1_BASE=0xE2800000 -CONFIG_LBLAW1_NAME="NAND" -CONFIG_LBLAW1_LENGTH_32_KBYTES=y -CONFIG_LBLAW2=y -CONFIG_LBLAW2_BASE=0xF0000000 -CONFIG_LBLAW2_NAME="VSC7385" -CONFIG_LBLAW2_LENGTH_128_KBYTES=y -CONFIG_LBLAW3=y -CONFIG_LBLAW3_BASE=0xFA000000 -CONFIG_LBLAW3_NAME="BCSR" -CONFIG_LBLAW3_LENGTH_32_KBYTES=y -CONFIG_ELBC_BR_OR_NAND_PRELIM_1=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="FLASH" -CONFIG_BR0_OR0_BASE=0xFE000000 -CONFIG_BR0_PORTSIZE_16BIT=y -CONFIG_OR0_AM_8_MBYTES=y -CONFIG_OR0_SCY_9=y -CONFIG_OR0_XACS_EXTENDED=y -CONFIG_OR0_EHTR_1_CYCLE=y -CONFIG_OR0_EAD_EXTRA=y -CONFIG_ELBC_BR1_OR1=y -CONFIG_BR1_OR1_NAME="NAND" -CONFIG_BR1_OR1_BASE=0xE2800000 -CONFIG_BR1_ERRORCHECKING_BOTH=y -CONFIG_BR1_MACHINE_FCM=y -CONFIG_OR1_SCY_1=y -CONFIG_OR1_CSCT_8_CYCLE=y -CONFIG_OR1_CST_ONE_CLOCK=y -CONFIG_OR1_CHT_TWO_CLOCK=y -CONFIG_OR1_TRLX_RELAXED=y -CONFIG_OR1_EHTR_8_CYCLE=y -CONFIG_ELBC_BR2_OR2=y -CONFIG_BR2_OR2_NAME="VSC7385" -CONFIG_BR2_OR2_BASE=0xF0000000 -CONFIG_OR2_AM_128_KBYTES=y -CONFIG_OR2_SCY_15=y -CONFIG_OR2_CSNT_EARLIER=y -CONFIG_OR2_XACS_EXTENDED=y -CONFIG_OR2_SETA_EXTERNAL=y -CONFIG_OR2_TRLX_RELAXED=y -CONFIG_OR2_EHTR_8_CYCLE=y -CONFIG_OR2_EAD_EXTRA=y -CONFIG_ELBC_BR3_OR3=y -CONFIG_BR3_OR3_NAME="BCSR" -CONFIG_BR3_OR3_BASE=0xFA000000 -CONFIG_OR3_SCY_15=y -CONFIG_OR3_CSNT_EARLIER=y -CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR3_XACS_EXTENDED=y -CONFIG_OR3_TRLX_RELAXED=y -CONFIG_OR3_EHTR_8_CYCLE=y -CONFIG_OR3_EAD_EXTRA=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_DPM=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_ACR_PIPE_DEP_4=y -CONFIG_ACR_RPTCNT_4=y -CONFIG_LCRR_EADC_1=y -CONFIG_LCRR_CLKDIV_4=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ" -CONFIG_BOOTDELAY=6 -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_MISC_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=e2800000.flash" -CONFIG_MTDPARTS_DEFAULT="mtdparts=e2800000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)" -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_ADDR=0xFE080000 -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/configs/MPC8313ERDB_66_defconfig b/configs/MPC8313ERDB_66_defconfig deleted file mode 100644 index 3d8d3219b4..0000000000 --- a/configs/MPC8313ERDB_66_defconfig +++ /dev/null @@ -1,168 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFE000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_SYS_CLK_FREQ=66666667 -CONFIG_MPC83xx=y -CONFIG_HIGH_BATS=y -CONFIG_TARGET_MPC8313ERDB_NOR=y -CONFIG_CORE_PLL_RATIO_2_1=y -CONFIG_PCI_HOST_MODE_ENABLE=y -CONFIG_PCI_INT_ARBITER1_ENABLE=y -CONFIG_BOOT_MEMORY_SPACE_LOW=y -CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y -CONFIG_TSEC1_MODE_RGMII=y -CONFIG_TSEC2_MODE_RGMII=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="DDR" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_256_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="PCI1_MEM" -CONFIG_BAT1_BASE=0x80000000 -CONFIG_BAT1_LENGTH_256_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="PCI1_MMIO_BASE" -CONFIG_BAT2_BASE=0x90000000 -CONFIG_BAT2_LENGTH_256_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_INHIBITED=y -CONFIG_BAT2_ICACHE_GUARDED=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT5=y -CONFIG_BAT5_NAME="IMMR" -CONFIG_BAT5_BASE=0xE0000000 -CONFIG_BAT5_LENGTH_256_MBYTES=y -CONFIG_BAT5_ACCESS_RW=y -CONFIG_BAT5_ICACHE_INHIBITED=y -CONFIG_BAT5_ICACHE_GUARDED=y -CONFIG_BAT5_DCACHE_INHIBITED=y -CONFIG_BAT5_DCACHE_GUARDED=y -CONFIG_BAT5_USER_MODE_VALID=y -CONFIG_BAT5_SUPERVISOR_MODE_VALID=y -CONFIG_BAT6=y -CONFIG_BAT6_NAME="STACK_IN_DCACHE" -CONFIG_BAT6_BASE=0xF0000000 -CONFIG_BAT6_LENGTH_256_MBYTES=y -CONFIG_BAT6_ACCESS_RW=y -CONFIG_BAT6_ICACHE_GUARDED=y -CONFIG_BAT6_DCACHE_GUARDED=y -CONFIG_BAT6_USER_MODE_VALID=y -CONFIG_BAT6_SUPERVISOR_MODE_VALID=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xFE000000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_16_MBYTES=y -CONFIG_LBLAW1=y -CONFIG_LBLAW1_BASE=0xE2800000 -CONFIG_LBLAW1_NAME="NAND" -CONFIG_LBLAW1_LENGTH_32_KBYTES=y -CONFIG_LBLAW2=y -CONFIG_LBLAW2_BASE=0xF0000000 -CONFIG_LBLAW2_NAME="VSC7385" -CONFIG_LBLAW2_LENGTH_128_KBYTES=y -CONFIG_LBLAW3=y -CONFIG_LBLAW3_BASE=0xFA000000 -CONFIG_LBLAW3_NAME="BCSR" -CONFIG_LBLAW3_LENGTH_32_KBYTES=y -CONFIG_ELBC_BR_OR_NAND_PRELIM_1=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="FLASH" -CONFIG_BR0_OR0_BASE=0xFE000000 -CONFIG_BR0_PORTSIZE_16BIT=y -CONFIG_OR0_AM_8_MBYTES=y -CONFIG_OR0_SCY_9=y -CONFIG_OR0_XACS_EXTENDED=y -CONFIG_OR0_EHTR_1_CYCLE=y -CONFIG_OR0_EAD_EXTRA=y -CONFIG_ELBC_BR1_OR1=y -CONFIG_BR1_OR1_NAME="NAND" -CONFIG_BR1_OR1_BASE=0xE2800000 -CONFIG_BR1_ERRORCHECKING_BOTH=y -CONFIG_BR1_MACHINE_FCM=y -CONFIG_OR1_SCY_1=y -CONFIG_OR1_CSCT_8_CYCLE=y -CONFIG_OR1_CST_ONE_CLOCK=y -CONFIG_OR1_CHT_TWO_CLOCK=y -CONFIG_OR1_TRLX_RELAXED=y -CONFIG_OR1_EHTR_8_CYCLE=y -CONFIG_ELBC_BR2_OR2=y -CONFIG_BR2_OR2_NAME="VSC7385" -CONFIG_BR2_OR2_BASE=0xF0000000 -CONFIG_OR2_AM_128_KBYTES=y -CONFIG_OR2_SCY_15=y -CONFIG_OR2_CSNT_EARLIER=y -CONFIG_OR2_XACS_EXTENDED=y -CONFIG_OR2_SETA_EXTERNAL=y -CONFIG_OR2_TRLX_RELAXED=y -CONFIG_OR2_EHTR_8_CYCLE=y -CONFIG_OR2_EAD_EXTRA=y -CONFIG_ELBC_BR3_OR3=y -CONFIG_BR3_OR3_NAME="BCSR" -CONFIG_BR3_OR3_BASE=0xFA000000 -CONFIG_OR3_SCY_15=y -CONFIG_OR3_CSNT_EARLIER=y -CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR3_XACS_EXTENDED=y -CONFIG_OR3_TRLX_RELAXED=y -CONFIG_OR3_EHTR_8_CYCLE=y -CONFIG_OR3_EAD_EXTRA=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_DPM=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_ACR_PIPE_DEP_4=y -CONFIG_ACR_RPTCNT_4=y -CONFIG_LCRR_EADC_1=y -CONFIG_LCRR_CLKDIV_4=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ" -CONFIG_BOOTDELAY=6 -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_MISC_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=e2800000.flash" -CONFIG_MTDPARTS_DEFAULT="mtdparts=e2800000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)" -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_ADDR=0xFE080000 -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/configs/MPC8313ERDB_NAND_33_defconfig b/configs/MPC8313ERDB_NAND_33_defconfig deleted file mode 100644 index 2fe304f179..0000000000 --- a/configs/MPC8313ERDB_NAND_33_defconfig +++ /dev/null @@ -1,178 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x00100000 -CONFIG_ENV_SIZE=0x4000 -CONFIG_ENV_OFFSET=0x80000 -CONFIG_SPL_TEXT_BASE=0xFFF00000 -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_ENV_OFFSET_REDUND=0x90000 -CONFIG_SYS_CLK_FREQ=33333333 -CONFIG_MPC83xx=y -CONFIG_HIGH_BATS=y -CONFIG_TARGET_MPC8313ERDB_NAND=y -CONFIG_SYSTEM_PLL_FACTOR_5_1=y -CONFIG_CORE_PLL_RATIO_2_1=y -CONFIG_PCI_HOST_MODE_ENABLE=y -CONFIG_PCI_INT_ARBITER1_ENABLE=y -CONFIG_BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL=y -CONFIG_TSEC1_MODE_RGMII=y -CONFIG_TSEC2_MODE_RGMII=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="DDR" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_256_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="PCI1_MEM" -CONFIG_BAT1_BASE=0x80000000 -CONFIG_BAT1_LENGTH_256_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="PCI1_MMIO_BASE" -CONFIG_BAT2_BASE=0x90000000 -CONFIG_BAT2_LENGTH_256_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_INHIBITED=y -CONFIG_BAT2_ICACHE_GUARDED=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT5=y -CONFIG_BAT5_NAME="IMMR" -CONFIG_BAT5_BASE=0xE0000000 -CONFIG_BAT5_LENGTH_256_MBYTES=y -CONFIG_BAT5_ACCESS_RW=y -CONFIG_BAT5_ICACHE_INHIBITED=y -CONFIG_BAT5_ICACHE_GUARDED=y -CONFIG_BAT5_DCACHE_INHIBITED=y -CONFIG_BAT5_DCACHE_GUARDED=y -CONFIG_BAT5_USER_MODE_VALID=y -CONFIG_BAT5_SUPERVISOR_MODE_VALID=y -CONFIG_BAT6=y -CONFIG_BAT6_NAME="STACK_IN_DCACHE" -CONFIG_BAT6_BASE=0xF0000000 -CONFIG_BAT6_LENGTH_256_MBYTES=y -CONFIG_BAT6_ACCESS_RW=y -CONFIG_BAT6_ICACHE_GUARDED=y -CONFIG_BAT6_DCACHE_GUARDED=y -CONFIG_BAT6_USER_MODE_VALID=y -CONFIG_BAT6_SUPERVISOR_MODE_VALID=y -CONFIG_NAND_LBLAWBAR_PRELIM_1=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xFE000000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_16_MBYTES=y -CONFIG_LBLAW1=y -CONFIG_LBLAW1_BASE=0xE2800000 -CONFIG_LBLAW1_NAME="NAND" -CONFIG_LBLAW1_LENGTH_32_KBYTES=y -CONFIG_LBLAW2=y -CONFIG_LBLAW2_BASE=0xF0000000 -CONFIG_LBLAW2_NAME="VSC7385" -CONFIG_LBLAW2_LENGTH_128_KBYTES=y -CONFIG_LBLAW3=y -CONFIG_LBLAW3_BASE=0xFA000000 -CONFIG_LBLAW3_NAME="BCSR" -CONFIG_LBLAW3_LENGTH_32_KBYTES=y -CONFIG_ELBC_BR_OR_NAND_PRELIM_0=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="NAND" -CONFIG_BR0_OR0_BASE=0xE2800000 -CONFIG_BR0_ERRORCHECKING_BOTH=y -CONFIG_BR0_MACHINE_FCM=y -CONFIG_OR0_SCY_1=y -CONFIG_OR0_CSCT_8_CYCLE=y -CONFIG_OR0_CST_ONE_CLOCK=y -CONFIG_OR0_CHT_TWO_CLOCK=y -CONFIG_OR0_TRLX_RELAXED=y -CONFIG_OR0_EHTR_8_CYCLE=y -CONFIG_ELBC_BR1_OR1=y -CONFIG_BR1_OR1_NAME="FLASH" -CONFIG_BR1_OR1_BASE=0xFE000000 -CONFIG_BR1_PORTSIZE_16BIT=y -CONFIG_OR1_AM_8_MBYTES=y -CONFIG_OR1_SCY_9=y -CONFIG_OR1_XACS_EXTENDED=y -CONFIG_OR1_EHTR_1_CYCLE=y -CONFIG_OR1_EAD_EXTRA=y -CONFIG_ELBC_BR2_OR2=y -CONFIG_BR2_OR2_NAME="VSC7385" -CONFIG_BR2_OR2_BASE=0xF0000000 -CONFIG_OR2_AM_128_KBYTES=y -CONFIG_OR2_SCY_15=y -CONFIG_OR2_CSNT_EARLIER=y -CONFIG_OR2_XACS_EXTENDED=y -CONFIG_OR2_SETA_EXTERNAL=y -CONFIG_OR2_TRLX_RELAXED=y -CONFIG_OR2_EHTR_8_CYCLE=y -CONFIG_OR2_EAD_EXTRA=y -CONFIG_ELBC_BR3_OR3=y -CONFIG_BR3_OR3_NAME="BCSR" -CONFIG_BR3_OR3_BASE=0xFA000000 -CONFIG_OR3_SCY_15=y -CONFIG_OR3_CSNT_EARLIER=y -CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR3_XACS_EXTENDED=y -CONFIG_OR3_TRLX_RELAXED=y -CONFIG_OR3_EHTR_8_CYCLE=y -CONFIG_OR3_EAD_EXTRA=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_DPM=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_ACR_PIPE_DEP_4=y -CONFIG_ACR_RPTCNT_4=y -CONFIG_LCRR_EADC_1=y -CONFIG_LCRR_CLKDIV_4=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ" -CONFIG_BOOTDELAY=6 -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_MISC_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=e2800000.flash" -CONFIG_MTDPARTS_DEFAULT="mtdparts=e2800000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)" -CONFIG_ENV_OVERWRITE=y -# CONFIG_ENV_IS_IN_FLASH is not set -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/configs/MPC8313ERDB_NAND_66_defconfig b/configs/MPC8313ERDB_NAND_66_defconfig deleted file mode 100644 index 28b973c424..0000000000 --- a/configs/MPC8313ERDB_NAND_66_defconfig +++ /dev/null @@ -1,177 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x00100000 -CONFIG_ENV_SIZE=0x4000 -CONFIG_ENV_OFFSET=0x80000 -CONFIG_SPL_TEXT_BASE=0xFFF00000 -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_ENV_OFFSET_REDUND=0x90000 -CONFIG_SYS_CLK_FREQ=66666667 -CONFIG_MPC83xx=y -CONFIG_HIGH_BATS=y -CONFIG_TARGET_MPC8313ERDB_NAND=y -CONFIG_CORE_PLL_RATIO_2_1=y -CONFIG_PCI_HOST_MODE_ENABLE=y -CONFIG_PCI_INT_ARBITER1_ENABLE=y -CONFIG_BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL=y -CONFIG_TSEC1_MODE_RGMII=y -CONFIG_TSEC2_MODE_RGMII=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="DDR" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_256_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="PCI1_MEM" -CONFIG_BAT1_BASE=0x80000000 -CONFIG_BAT1_LENGTH_256_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="PCI1_MMIO_BASE" -CONFIG_BAT2_BASE=0x90000000 -CONFIG_BAT2_LENGTH_256_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_INHIBITED=y -CONFIG_BAT2_ICACHE_GUARDED=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT5=y -CONFIG_BAT5_NAME="IMMR" -CONFIG_BAT5_BASE=0xE0000000 -CONFIG_BAT5_LENGTH_256_MBYTES=y -CONFIG_BAT5_ACCESS_RW=y -CONFIG_BAT5_ICACHE_INHIBITED=y -CONFIG_BAT5_ICACHE_GUARDED=y -CONFIG_BAT5_DCACHE_INHIBITED=y -CONFIG_BAT5_DCACHE_GUARDED=y -CONFIG_BAT5_USER_MODE_VALID=y -CONFIG_BAT5_SUPERVISOR_MODE_VALID=y -CONFIG_BAT6=y -CONFIG_BAT6_NAME="STACK_IN_DCACHE" -CONFIG_BAT6_BASE=0xF0000000 -CONFIG_BAT6_LENGTH_256_MBYTES=y -CONFIG_BAT6_ACCESS_RW=y -CONFIG_BAT6_ICACHE_GUARDED=y -CONFIG_BAT6_DCACHE_GUARDED=y -CONFIG_BAT6_USER_MODE_VALID=y -CONFIG_BAT6_SUPERVISOR_MODE_VALID=y -CONFIG_NAND_LBLAWBAR_PRELIM_1=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xFE000000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_16_MBYTES=y -CONFIG_LBLAW1=y -CONFIG_LBLAW1_BASE=0xE2800000 -CONFIG_LBLAW1_NAME="NAND" -CONFIG_LBLAW1_LENGTH_32_KBYTES=y -CONFIG_LBLAW2=y -CONFIG_LBLAW2_BASE=0xF0000000 -CONFIG_LBLAW2_NAME="VSC7385" -CONFIG_LBLAW2_LENGTH_128_KBYTES=y -CONFIG_LBLAW3=y -CONFIG_LBLAW3_BASE=0xFA000000 -CONFIG_LBLAW3_NAME="BCSR" -CONFIG_LBLAW3_LENGTH_32_KBYTES=y -CONFIG_ELBC_BR_OR_NAND_PRELIM_0=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="NAND" -CONFIG_BR0_OR0_BASE=0xE2800000 -CONFIG_BR0_ERRORCHECKING_BOTH=y -CONFIG_BR0_MACHINE_FCM=y -CONFIG_OR0_SCY_1=y -CONFIG_OR0_CSCT_8_CYCLE=y -CONFIG_OR0_CST_ONE_CLOCK=y -CONFIG_OR0_CHT_TWO_CLOCK=y -CONFIG_OR0_TRLX_RELAXED=y -CONFIG_OR0_EHTR_8_CYCLE=y -CONFIG_ELBC_BR1_OR1=y -CONFIG_BR1_OR1_NAME="FLASH" -CONFIG_BR1_OR1_BASE=0xFE000000 -CONFIG_BR1_PORTSIZE_16BIT=y -CONFIG_OR1_AM_8_MBYTES=y -CONFIG_OR1_SCY_9=y -CONFIG_OR1_XACS_EXTENDED=y -CONFIG_OR1_EHTR_1_CYCLE=y -CONFIG_OR1_EAD_EXTRA=y -CONFIG_ELBC_BR2_OR2=y -CONFIG_BR2_OR2_NAME="VSC7385" -CONFIG_BR2_OR2_BASE=0xF0000000 -CONFIG_OR2_AM_128_KBYTES=y -CONFIG_OR2_SCY_15=y -CONFIG_OR2_CSNT_EARLIER=y -CONFIG_OR2_XACS_EXTENDED=y -CONFIG_OR2_SETA_EXTERNAL=y -CONFIG_OR2_TRLX_RELAXED=y -CONFIG_OR2_EHTR_8_CYCLE=y -CONFIG_OR2_EAD_EXTRA=y -CONFIG_ELBC_BR3_OR3=y -CONFIG_BR3_OR3_NAME="BCSR" -CONFIG_BR3_OR3_BASE=0xFA000000 -CONFIG_OR3_SCY_15=y -CONFIG_OR3_CSNT_EARLIER=y -CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR3_XACS_EXTENDED=y -CONFIG_OR3_TRLX_RELAXED=y -CONFIG_OR3_EHTR_8_CYCLE=y -CONFIG_OR3_EAD_EXTRA=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_DPM=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_ACR_PIPE_DEP_4=y -CONFIG_ACR_RPTCNT_4=y -CONFIG_LCRR_EADC_1=y -CONFIG_LCRR_CLKDIV_4=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ" -CONFIG_BOOTDELAY=6 -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_MISC_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=e2800000.flash" -CONFIG_MTDPARTS_DEFAULT="mtdparts=e2800000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)" -CONFIG_ENV_OVERWRITE=y -# CONFIG_ENV_IS_IN_FLASH is not set -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/MPC8313ERDB_NAND.h b/include/configs/MPC8313ERDB_NAND.h deleted file mode 100644 index 2db0c6fd78..0000000000 --- a/include/configs/MPC8313ERDB_NAND.h +++ /dev/null @@ -1,392 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010. - */ -/* - * mpc8313epb board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 - -#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_NS16550_MIN_FUNCTIONS -#endif - -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#define CONFIG_SPL_MAX_SIZE (4 * 1024) -#define CONFIG_SPL_PAD_TO 0x4000 - -#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000 -#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 16384 -#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#endif - -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -#define CONFIG_PCI_INDIRECT_BRIDGE - -/* - * On-board devices - * - * TSEC1 is VSC switch - * TSEC2 is SoC TSEC - */ -#define CONFIG_VSC7385_ENET -#define CONFIG_TSEC2 - -#if !defined(CONFIG_SPL_BUILD) -#define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR -#endif - -/* Early revs of this board will lock up hard when attempting - * to access the PMC registers, unless a JTAG debugger is - * connected, or some resistor modifications are made. - */ -#define CONFIG_SYS_8313ERDB_BROKEN_PMC 1 - -/* - * Device configurations - */ - -/* Vitesse 7385 */ - -#ifdef CONFIG_VSC7385_ENET - -#define CONFIG_TSEC1 - -/* The flash address and size of the VSC7385 firmware image */ -#define CONFIG_VSC7385_IMAGE 0xFE7FE000 -#define CONFIG_VSC7385_IMAGE_SIZE 8192 - -#endif - -/* - * DDR Setup - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/ - -/* - * Manually set up DDR parameters, as this board does not - * seem to have the SPD connected to I2C. - */ -#define CONFIG_SYS_DDR_SIZE 128 /* MB */ -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ - | CSCONFIG_ODT_RD_NEVER \ - | CSCONFIG_ODT_WR_ONLY_CURRENT \ - | CSCONFIG_ROW_BIT_13 \ - | CSCONFIG_COL_BIT_10) - /* 0x80010102 */ - -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ - | (0 << TIMING_CFG0_WRT_SHIFT) \ - | (0 << TIMING_CFG0_RRT_SHIFT) \ - | (0 << TIMING_CFG0_WWT_SHIFT) \ - | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ - | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ - | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ - | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) - /* 0x00220802 */ -#define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \ - | (8 << TIMING_CFG1_ACTTOPRE_SHIFT) \ - | (3 << TIMING_CFG1_ACTTORW_SHIFT) \ - | (5 << TIMING_CFG1_CASLAT_SHIFT) \ - | (10 << TIMING_CFG1_REFREC_SHIFT) \ - | (3 << TIMING_CFG1_WRREC_SHIFT) \ - | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ - | (2 << TIMING_CFG1_WRTORD_SHIFT)) - /* 0x3835a322 */ -#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \ - | (5 << TIMING_CFG2_CPO_SHIFT) \ - | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ - | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ - | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ - | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ - | (6 << TIMING_CFG2_FOUR_ACT_SHIFT)) - /* 0x129048c6 */ /* P9-45,may need tuning */ -#define CONFIG_SYS_DDR_INTERVAL ((1296 << SDRAM_INTERVAL_REFINT_SHIFT) \ - | (1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) - /* 0x05100500 */ -#if defined(CONFIG_DDR_2T_TIMING) -#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \ - | SDRAM_CFG_SDRAM_TYPE_DDR2 \ - | SDRAM_CFG_DBW_32 \ - | SDRAM_CFG_2T_EN) - /* 0x43088000 */ -#else -#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \ - | SDRAM_CFG_SDRAM_TYPE_DDR2 \ - | SDRAM_CFG_DBW_32) - /* 0x43080000 */ -#endif -#define CONFIG_SYS_SDRAM_CFG2 0x00401000 -/* set burst length to 8 for 32-bit data path */ -#define CONFIG_SYS_DDR_MODE ((0x4448 << SDRAM_MODE_ESD_SHIFT) \ - | (0x0632 << SDRAM_MODE_SD_SHIFT)) - /* 0x44480632 */ -#define CONFIG_SYS_DDR_MODE_2 0x8000C000 - -#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 - /*0x02000000*/ -#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ - | DDRCDR_PZ_NOMZ \ - | DDRCDR_NZ_NOMZ \ - | DDRCDR_M_ODR) - -/* - * FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */ -#define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 135 /* sectors per device */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \ - !defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ - -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ - -/* drivers/mtd/nand/raw/nand.c */ -#if defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_NAND_BASE 0xFFF00000 -#else -#define CONFIG_SYS_NAND_BASE 0xE2800000 -#endif - -#define CONFIG_MTD_PARTITION - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE 16384 -#define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) - -/* Still needed for spl_minimal.c */ -#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR0_PRELIM -#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR0_PRELIM - -/* local bus write LED / read status buffer (BCSR) mapping */ -#define CONFIG_SYS_BCSR_ADDR 0xFA000000 -#define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */ - /* map at 0xFA000000 on LCS3 */ - -/* Vitesse 7385 */ - -#ifdef CONFIG_VSC7385_ENET - - /* VSC7385 Base address on LCS2 */ -#define CONFIG_SYS_VSC7385_BASE 0xF0000000 -#define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */ - - -#endif - -#define CONFIG_MPC83XX_GPIO 1 - -/* - * Serial Port - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE -#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 -#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE -#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ - -/* - * TSEC - */ - -#define CONFIG_GMII /* MII PHY management */ - -#ifdef CONFIG_TSEC1 -#define CONFIG_HAS_ETH0 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_SYS_TSEC1_OFFSET 0x24000 -#define TSEC1_PHY_ADDR 0x1c -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC1_PHYIDX 0 -#endif - -#ifdef CONFIG_TSEC2 -#define CONFIG_HAS_ETH1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define CONFIG_SYS_TSEC2_OFFSET 0x25000 -#define TSEC2_PHY_ADDR 4 -#define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC2_PHYIDX 0 -#endif - -/* Options are: TSEC[0-1] */ -#define CONFIG_ETHPRIME "TSEC1" - -/* - * Configure on-board RTC - */ -#define CONFIG_RTC_DS1337 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* - * Environment - */ -#define CONFIG_ENV_RANGE (CONFIG_SYS_NAND_BLOCK_SIZE * 4) - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - - /* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ - /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ - -#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)) - -/* System IO Config */ -#define CONFIG_SYS_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */ - /* Enable Internal USB Phy and GPIO on LCD Connector */ -#define CONFIG_SYS_SICRL (SICRL_USBDR_10 | SICRL_LBC) - -/* - * Environment Configuration - */ - -#define CONFIG_NETDEV "eth1" - -#define CONFIG_HOSTNAME "mpc8313erdb" -#define CONFIG_ROOTPATH "/nfs/root/path" -#define CONFIG_BOOTFILE "uImage" - /* U-Boot image on TFTP server */ -#define CONFIG_UBOOTPATH "u-boot.bin" -#define CONFIG_FDTFILE "mpc8313erdb.dtb" - - /* default location for tftp and bootm */ -#define CONFIG_LOADADDR 800000 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=" CONFIG_NETDEV "\0" \ - "ethprime=TSEC1\0" \ - "uboot=" CONFIG_UBOOTPATH "\0" \ - "tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize; " \ - "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize\0" \ - "fdtaddr=780000\0" \ - "fdtfile=" CONFIG_FDTFILE "\0" \ - "console=ttyS0\0" \ - "setbootargs=setenv bootargs " \ - "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ - "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"\ - "$netdev:off " \ - "root=$rootdev rw console=$console,$baudrate $othbootargs\0" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv rootdev /dev/nfs;" \ - "run setbootargs;" \ - "run setipargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv rootdev /dev/ram;" \ - "run setbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8313ERDB_NOR.h b/include/configs/MPC8313ERDB_NOR.h deleted file mode 100644 index c223ea5613..0000000000 --- a/include/configs/MPC8313ERDB_NOR.h +++ /dev/null @@ -1,361 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010. - */ -/* - * mpc8313epb board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 - -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -#include -#define CONFIG_PCI_INDIRECT_BRIDGE - -/* - * On-board devices - * - * TSEC1 is VSC switch - * TSEC2 is SoC TSEC - */ -#define CONFIG_VSC7385_ENET -#define CONFIG_TSEC2 - -/* Early revs of this board will lock up hard when attempting - * to access the PMC registers, unless a JTAG debugger is - * connected, or some resistor modifications are made. - */ -#define CONFIG_SYS_8313ERDB_BROKEN_PMC 1 - -/* - * Device configurations - */ - -/* Vitesse 7385 */ - -#ifdef CONFIG_VSC7385_ENET - -#define CONFIG_TSEC1 - -/* The flash address and size of the VSC7385 firmware image */ -#define CONFIG_VSC7385_IMAGE 0xFE7FE000 -#define CONFIG_VSC7385_IMAGE_SIZE 8192 - -#endif - -/* - * DDR Setup - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/ - -/* - * Manually set up DDR parameters, as this board does not - * seem to have the SPD connected to I2C. - */ -#define CONFIG_SYS_DDR_SIZE 128 /* MB */ -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ - | CSCONFIG_ODT_RD_NEVER \ - | CSCONFIG_ODT_WR_ONLY_CURRENT \ - | CSCONFIG_ROW_BIT_13 \ - | CSCONFIG_COL_BIT_10) - /* 0x80010102 */ - -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ - | (0 << TIMING_CFG0_WRT_SHIFT) \ - | (0 << TIMING_CFG0_RRT_SHIFT) \ - | (0 << TIMING_CFG0_WWT_SHIFT) \ - | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ - | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ - | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ - | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) - /* 0x00220802 */ -#define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \ - | (8 << TIMING_CFG1_ACTTOPRE_SHIFT) \ - | (3 << TIMING_CFG1_ACTTORW_SHIFT) \ - | (5 << TIMING_CFG1_CASLAT_SHIFT) \ - | (10 << TIMING_CFG1_REFREC_SHIFT) \ - | (3 << TIMING_CFG1_WRREC_SHIFT) \ - | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ - | (2 << TIMING_CFG1_WRTORD_SHIFT)) - /* 0x3835a322 */ -#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \ - | (5 << TIMING_CFG2_CPO_SHIFT) \ - | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ - | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ - | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ - | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ - | (6 << TIMING_CFG2_FOUR_ACT_SHIFT)) - /* 0x129048c6 */ /* P9-45,may need tuning */ -#define CONFIG_SYS_DDR_INTERVAL ((1296 << SDRAM_INTERVAL_REFINT_SHIFT) \ - | (1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) - /* 0x05100500 */ -#if defined(CONFIG_DDR_2T_TIMING) -#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \ - | SDRAM_CFG_SDRAM_TYPE_DDR2 \ - | SDRAM_CFG_DBW_32 \ - | SDRAM_CFG_2T_EN) - /* 0x43088000 */ -#else -#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \ - | SDRAM_CFG_SDRAM_TYPE_DDR2 \ - | SDRAM_CFG_DBW_32) - /* 0x43080000 */ -#endif -#define CONFIG_SYS_SDRAM_CFG2 0x00401000 -/* set burst length to 8 for 32-bit data path */ -#define CONFIG_SYS_DDR_MODE ((0x4448 << SDRAM_MODE_ESD_SHIFT) \ - | (0x0632 << SDRAM_MODE_SD_SHIFT)) - /* 0x44480632 */ -#define CONFIG_SYS_DDR_MODE_2 0x8000C000 - -#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 - /*0x02000000*/ -#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ - | DDRCDR_PZ_NOMZ \ - | DDRCDR_NZ_NOMZ \ - | DDRCDR_M_ODR) - -/* - * FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ -#define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 135 /* sectors per device */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \ - !defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ - -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ - -/* drivers/mtd/nand/nand.c */ -#define CONFIG_SYS_NAND_BASE 0xE2800000 - -#define CONFIG_MTD_PARTITION - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE 16384 -#define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) - -/* Still needed for spl_minimal.c */ -#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM -#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM - -/* local bus write LED / read status buffer (BCSR) mapping */ -#define CONFIG_SYS_BCSR_ADDR 0xFA000000 -#define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */ - /* map at 0xFA000000 on LCS3 */ -/* Vitesse 7385 */ - -#ifdef CONFIG_VSC7385_ENET - - /* VSC7385 Base address on LCS2 */ -#define CONFIG_SYS_VSC7385_BASE 0xF0000000 -#define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */ - - -#endif - -#define CONFIG_MPC83XX_GPIO 1 - -/* - * Serial Port - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE -#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 -#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE -#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ - -/* - * TSEC - */ - -#define CONFIG_GMII /* MII PHY management */ - -#ifdef CONFIG_TSEC1 -#define CONFIG_HAS_ETH0 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_SYS_TSEC1_OFFSET 0x24000 -#define TSEC1_PHY_ADDR 0x1c -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC1_PHYIDX 0 -#endif - -#ifdef CONFIG_TSEC2 -#define CONFIG_HAS_ETH1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define CONFIG_SYS_TSEC2_OFFSET 0x25000 -#define TSEC2_PHY_ADDR 4 -#define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC2_PHYIDX 0 -#endif - -/* Options are: TSEC[0-1] */ -#define CONFIG_ETHPRIME "TSEC1" - -/* - * Configure on-board RTC - */ -#define CONFIG_RTC_DS1337 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* - * Environment - */ -#if !defined(CONFIG_SYS_RAMBOOT) -/* Address and size of Redundant Environment Sector */ -#endif - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - - /* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ - /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ - -#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)) - -/* System IO Config */ -#define CONFIG_SYS_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */ - /* Enable Internal USB Phy and GPIO on LCD Connector */ -#define CONFIG_SYS_SICRL (SICRL_USBDR_10 | SICRL_LBC) - -/* - * Environment Configuration - */ - -#define CONFIG_NETDEV "eth1" - -#define CONFIG_HOSTNAME "mpc8313erdb" -#define CONFIG_ROOTPATH "/nfs/root/path" -#define CONFIG_BOOTFILE "uImage" - /* U-Boot image on TFTP server */ -#define CONFIG_UBOOTPATH "u-boot.bin" -#define CONFIG_FDTFILE "mpc8313erdb.dtb" - - /* default location for tftp and bootm */ -#define CONFIG_LOADADDR 800000 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=" CONFIG_NETDEV "\0" \ - "ethprime=TSEC1\0" \ - "uboot=" CONFIG_UBOOTPATH "\0" \ - "tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize; " \ - "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize\0" \ - "fdtaddr=780000\0" \ - "fdtfile=" CONFIG_FDTFILE "\0" \ - "console=ttyS0\0" \ - "setbootargs=setenv bootargs " \ - "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ - "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"\ - "$netdev:off " \ - "root=$rootdev rw console=$console,$baudrate $othbootargs\0" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv rootdev /dev/nfs;" \ - "run setbootargs;" \ - "run setipargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv rootdev /dev/ram;" \ - "run setbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#endif /* __CONFIG_H */