From: Jayesh Choudhary Date: Wed, 12 Jun 2024 09:11:23 +0000 (+0530) Subject: doc: board: ti: Add J722S-EVM documentation X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=69d5e2dd83144b58655e27483968f6d55a04d464;p=u-boot.git doc: board: ti: Add J722S-EVM documentation Introduce basic documentation for the J722S-EVM. Signed-off-by: Jayesh Choudhary Reviewed-by: Neha Malcom Francis --- diff --git a/doc/board/ti/j722s_evm.rst b/doc/board/ti/j722s_evm.rst new file mode 100644 index 0000000000..10b243908a --- /dev/null +++ b/doc/board/ti/j722s_evm.rst @@ -0,0 +1,260 @@ +.. SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +.. sectionauthor:: Jayesh Choudhary + +J722S-EVM Platform +================== + +The J722S is a family of application processors built for Automotive and +Linux Application development. J722S family of SoCs is a superset of the +AM62P SoC family and shares similar memory map, thus the nodes are being +reused from AM62P includes instead of duplicating the definitions. + +Some highlights of J722S SoC (in addition to AM62P SoC features) are: + +* Two Cortex-R5F for Functional Safety or general-purpose usage and + two C7x floating point vector DSP with Matrix Multiply Accelerator + for deep learning. + +* Vision Processing Accelerator (VPAC) with image signal processor + and Depth and Motion Processing Accelerator (DMPAC). + +* 7xUARTs, 3xSPI, 5xI2C, 2xUSB2, 2xCAN-FD, 3xMMC and SD, GPMC for + NAND/FPGA connection, OSPI memory controller, 5xMcASP for audio, + 4xCSI-RX for Camera, 1 PCIe Gen3 controller, USB3.0 eCAP/eQEP, + ePWM, among other peripherals. + +For those interested, more details about this SoC can be found in the +Technical Reference Manual here: https://www.ti.com/lit/zip/sprujb3 + +Boot Flow: +---------- + +The bootflow is exactly the same as all SoCs in the am62xxx extended SoC +family. Below is the pictorial representation: + +.. image:: img/boot_diagram_k3_current.svg + :alt: Boot flow diagram + +- Here TIFS acts as master and provides all the critical services. R5/A53 + requests TIFS to get these services done as shown in the above diagram. + +Sources: +-------- + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_boot_sources + :end-before: .. k3_rst_include_end_boot_sources + +Build procedure: +---------------- + +0. Setup the environment variables: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_common_env_vars_desc + :end-before: .. k3_rst_include_end_common_env_vars_desc + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_board_env_vars_desc + :end-before: .. k3_rst_include_end_board_env_vars_desc + +Set the variables corresponding to this platform: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_common_env_vars_defn + :end-before: .. k3_rst_include_end_common_env_vars_defn + +.. code-block:: bash + + $ export UBOOT_CFG_CORTEXR=j722s_evm_r5_defconfig + $ export UBOOT_CFG_CORTEXA=j722s_evm_a53_defconfig + $ export TFA_BOARD=lite + $ export OPTEE_PLATFORM=k3-am62x + $ export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y" + +.. j722s_evm_rst_include_start_build_steps + +1. Trusted Firmware-A: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_build_steps_tfa + :end-before: .. k3_rst_include_end_build_steps_tfa + + +2. OP-TEE: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_build_steps_optee + :end-before: .. k3_rst_include_end_build_steps_optee + +3. U-Boot: + +* 3.1 R5: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_build_steps_spl_r5 + :end-before: .. k3_rst_include_end_build_steps_spl_r5 + +* 3.2 A53: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_build_steps_uboot + :end-before: .. k3_rst_include_end_build_steps_uboot +.. j722s_evm_rst_include_end_build_steps + +Target Images +-------------- + +In order to boot we need tiboot3.bin, tispl.bin and u-boot.img. Each SoC +variant (HS-FS, HS-SE) requires a different source for these files. + + - HS-FS + + * tiboot3-j722s-hs-fs-evm.bin from step 3.1 + * tispl.bin, u-boot.img from step 3.2 + + - HS-SE + + * tiboot3-j722s-hs-evm.bin from step 3.1 + * tispl.bin, u-boot.img from step 3.2 + +Image formats: +-------------- + +- tiboot3.bin + +.. image:: img/multi_cert_tiboot3.bin.svg + :alt: tiboot3.bin image format + +- tispl.bin + +.. image:: img/dm_tispl.bin.svg + :alt: tispl.bin image format + +A53 SPL DDR Memory Layout +------------------------- + +.. j722s_evm_rst_include_start_ddr_mem_layout + +This provides an overview memory usage in A53 SPL stage. + +.. list-table:: + :widths: 16 16 16 + :header-rows: 1 + + * - Region + - Start Address + - End Address + + * - EMPTY + - 0x80000000 + - 0x80080000 + + * - TEXT BASE + - 0x80080000 + - 0x800d8000 + + * - EMPTY + - 0x800d8000 + - 0x80477660 + + * - STACK + - 0x80477660 + - 0x80477e60 + + * - GD + - 0x80477e60 + - 0x80478000 + + * - MALLOC + - 0x80478000 + - 0x80480000 + + * - EMPTY + - 0x80480000 + - 0x80a00000 + + * - BSS + - 0x80a00000 + - 0x80a80000 + + * - BLOBS + - 0x80a80000 + - 0x80d00400 + + * - EMPTY + - 0x80d00400 + - 0x81000000 +.. j722s_evm_rst_include_end_ddr_mem_layout + +Switch Setting for Boot Mode +---------------------------- + +Boot Mode pins provide means to select the boot mode and options before the +device is powered up. After every POR, they are the main source to populate +the Boot Parameter Tables. + +The following table shows some common boot modes used on J722S-EVM +platform. More details can be found in the Technical Reference Manual: +https://www.ti.com/lit/zip/sprujb3 under the `Boot Mode Pins` section. + +.. note:: + + This device is very new. Currently only UART boot is available while + we continue to add support for the other bootmodes. + +.. list-table:: Boot Modes + :widths: 16 16 16 + :header-rows: 1 + + * - Switch Label + - SW3: 12345678 + - SW4: 12345678 + + * - SD + - 11000010 + - 01000000 + + * - OSPI + - 11001110 + - 00000000 + + * - EMMC + - 11010010 + - 00000000 + + * - UART + - 11011100 + - 00000000 + + * - USB DFU + - 11001010 + - 00000000 + +For SW2 and SW1, the switch state in the "ON" position = 1. + +Debugging U-Boot +---------------- + +See :ref:`Common Debugging environment - OpenOCD`: for +detailed setup information. + +.. warning:: + + **OpenOCD support after**: v0.12.0 + + While support for the entire K3 generation including the am62xxx + extended family was added before v0.12.0, the tcl scripts for the + am62px have been accepted and will be available in the next release of + OpenOCD. It may be necessary to build OpenOCD from source depending on + the version your distribution has packaged. + +.. include:: k3.rst + :start-after: .. k3_rst_include_start_openocd_connect_XDS110 + :end-before: .. k3_rst_include_end_openocd_connect_XDS110 + +To start OpenOCD and connect to the board + +.. code-block:: bash + + openocd -f board/ti_j722sevm.cfg diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst index a1c01d1cf0..eba0f0e3e4 100644 --- a/doc/board/ti/k3.rst +++ b/doc/board/ti/k3.rst @@ -42,6 +42,7 @@ K3 Based SoCs ../beagle/j721e_beagleboneai64 j721e_evm j721s2_evm + j722s_evm j784s4_evm Boot Flow Overview