From: Dylan Hung Date: Tue, 21 Feb 2023 13:01:09 +0000 (+0800) Subject: ram: ast2600: Keep MPLL power on X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=45443f6089e1e194bdd8f2aa351c72e32eb1d815;p=u-boot.git ram: ast2600: Keep MPLL power on According to the PLL vendor, we should keep the PLL power on, so we shouldn't toggle the power-down bit during PLL initialization. Signed-off-by: Dylan Hung Reviewed-by: Joel Stanley --- diff --git a/drivers/ram/aspeed/sdram_ast2600.c b/drivers/ram/aspeed/sdram_ast2600.c index 1876755412..d463933363 100644 --- a/drivers/ram/aspeed/sdram_ast2600.c +++ b/drivers/ram/aspeed/sdram_ast2600.c @@ -1089,13 +1089,13 @@ static int ast2600_sdrammc_probe(struct udevice *dev) } reg = readl(&priv->scu->mpll); - reg &= ~(SCU_PLL_BYPASS | SCU_PLL_DIV_MASK | + reg &= ~(SCU_PLL_BYPASS | SCU_PLL_OFF | SCU_PLL_DIV_MASK | SCU_PLL_DENUM_MASK | SCU_PLL_NUM_MASK); - reg |= (SCU_PLL_RST | SCU_PLL_OFF | SCU_MPLL_FREQ_CFG); + reg |= (SCU_PLL_RST | SCU_MPLL_FREQ_CFG); writel(reg, &priv->scu->mpll); writel(SCU_MPLL_EXT_CFG, &priv->scu->mpll_ext); udelay(100); - reg &= ~(SCU_PLL_RST | SCU_PLL_OFF); + reg &= ~SCU_PLL_RST; writel(reg, &priv->scu->mpll); while ((readl(&priv->scu->mpll_ext) & BIT(31)) == 0)