From: Marek Vasut Date: Mon, 26 Feb 2018 18:55:37 +0000 (+0100) Subject: ARM: dts: rmobile: Import proper DTS for H2 Stout X-Git-Url: http://git.dujemihanovic.xyz/html/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=2155a7981dccf9c8dbe6ee61d4d6133bab462038;p=u-boot.git ARM: dts: rmobile: Import proper DTS for H2 Stout Replace the placeholder DTS for R8A7790 H2 Stout with a proper DTS from Linux next . Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu --- diff --git a/arch/arm/dts/r8a7790-stout.dts b/arch/arm/dts/r8a7790-stout.dts index eb82934c59..301cb728fe 100644 --- a/arch/arm/dts/r8a7790-stout.dts +++ b/arch/arm/dts/r8a7790-stout.dts @@ -8,19 +8,112 @@ /dts-v1/; #include "r8a7790.dtsi" +#include +#include / { model = "Stout"; compatible = "renesas,stout", "renesas,r8a7790"; aliases { - serial0 = &scif0; + serial0 = &scifa0; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; }; memory@40000000 { device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; + + leds { + compatible = "gpio-leds"; + led1 { + gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + }; + led2 { + gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; + }; + led3 { + gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; + }; + led5 { + gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + }; + }; + + fixedregulator3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + osc1_clk: osc1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + osc4_clk: osc4-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>, + <&osc1_clk>; + clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", "dclkin.0"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + port@1 { + lvds_connector0: endpoint { + }; + }; + port@2 { + lvds_connector1: endpoint { + }; + }; + }; }; &extal_clk { @@ -28,22 +121,128 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; - scif0_pins: scif0 { - groups = "scif0_data"; - function = "scif0"; + du_pins: du { + groups = "du_rgb888", "du_sync_1", "du_clk_out_0"; + function = "du"; + }; + + scifa0_pins: scifa0 { + groups = "scifa0_data_b"; + function = "scifa0"; }; scif_clk_pins: scif_clk { groups = "scif_clk"; function = "scif_clk"; }; + + ether_pins: ether { + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; + }; + + phy1_pins: phy1 { + groups = "intc_irq1"; + function = "intc"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + qspi_pins: qspi { + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; + }; + + iic2_pins: iic2 { + groups = "iic2_b"; + function = "iic2"; + }; + + iic3_pins: iic3 { + groups = "iic3"; + function = "iic3"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; }; -&scif0 { - pinctrl-0 = <&scif0_pins>; +ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; + +&cmt0 { + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash: flash@0 { + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-cpha; + spi-cpol; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "loader"; + reg = <0x00000000 0x00080000>; + read-only; + }; + partition@80000 { + label = "uboot"; + reg = <0x00080000 0x00040000>; + read-only; + }; + partition@c0000 { + label = "uboot-env"; + reg = <0x000c0000 0x00040000>; + read-only; + }; + partition@100000 { + label = "flash"; + reg = <0x00100000 0x03f00000>; + }; + }; + }; +}; + +&scifa0 { + pinctrl-0 = <&scifa0_pins>; pinctrl-names = "default"; status = "okay"; @@ -52,3 +251,114 @@ &scif_clk { clock-frequency = <14745600>; }; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; + +&iic2 { + status = "okay"; + pinctrl-0 = <&iic2_pins>; + pinctrl-names = "default"; + + clock-frequency = <100000>; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + clocks = <&osc4_clk>; + clock-names = "cec"; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; + +&iic3 { + pinctrl-names = "default"; + pinctrl-0 = <&iic3_pins>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; + + vdd_dvfs: regulator@68 { + compatible = "dlg,da9210"; + reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd: regulator@70 { + compatible = "dlg,da9210"; + reg = <0x70>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&usbphy { + status = "okay"; +};