]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
arm64: zynqmp: Remove si5328 and si5382 nodes
authorMichal Simek <michal.simek@xilinx.com>
Thu, 3 Jun 2021 09:58:08 +0000 (11:58 +0200)
committerMichal Simek <michal.simek@xilinx.com>
Wed, 23 Jun 2021 07:48:35 +0000 (09:48 +0200)
There are no drivers for these devices that's why remove that nodes
completely. This change is done based on Linux kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210308115437.2232847-1-quanyang.wang@windriver.com
arch/arm/dts/zynqmp-zcu102-revA.dts
arch/arm/dts/zynqmp-zcu104-revA.dts
arch/arm/dts/zynqmp-zcu104-revC.dts
arch/arm/dts/zynqmp-zcu106-revA.dts
arch/arm/dts/zynqmp-zcu111-revA.dts

index 1b08ac02afaf1dad7c33917f0f5569f98bee8fa2..44e1b2877fdf4fbeb7c1177052f71447c930a3ad 100644 (file)
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <4>;
-                       si5328: clock-generator@69 {/* SI5328 - u20 */
-                               compatible = "silabs,si5328";
-                               reg = <0x69>;
-                               /*
-                                * Chip has interrupt present connected to PL
-                                * interrupt-parent = <&>;
-                                * interrupts = <>;
-                                */
-                       };
+                       /* SI5328 - u20 */
                };
                /* 5 - 7 unconnected */
        };
index f368309d68f7a99aab8fe4d258e27e7b15360120..596251e9794d94f4bf8007f9681d1a662621bc80 100644 (file)
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <1>;
-                       clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */
-                               compatible = "idt,8t49n287";
-                               reg = <0x6c>;
-                       };
+                       /* 8T49N287 - u182 */
                };
 
                i2c@2 {
index 9b816476a94b3745018d128788e9f1811c94f0ee..6045b56e8748a0442e8a1034d1d9f8dd249ff80b 100644 (file)
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <1>;
-                       clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */
-                               compatible = "idt,8t49n287";
-                               reg = <0x6c>;
-                       };
+                       /* 8T49N287 - u182 */
                };
 
                i2c@2 {
index 25076f4e78e5edbfd92f404fb2e313e8e3ccb7df..86ab94fb2f627d1906c396bb82465b26cd3c71b6 100644 (file)
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <4>;
-                       si5328: clock-generator@69 {/* SI5328 - u20 */
-                               reg = <0x69>;
-                               /*
-                                * Chip has interrupt present connected to PL
-                                * interrupt-parent = <&>;
-                                * interrupts = <>;
-                                */
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               #clock-cells = <1>;
-                               clocks = <&refhdmi>;
-                               clock-names = "xtal";
-                               clock-output-names = "si5328";
-
-                               si5328_clk: clk0@0 {
-                                       reg = <0>;
-                                       clock-frequency = <27000000>;
-                               };
-                       };
+                       /* SI5328 - u20 */
                };
                i2c@5 {
                        #address-cells = <1>;
index 98488245fa26c5ebcd675f5caade9e94b456ac8f..84eb899ecb38839e7a85c477267e8a41386f237b 100644 (file)
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <4>;
-                       si5382: clock-generator@69 { /* SI5382 - u48 */
-                               compatible = "silabs,si5382";
-                               reg = <0x69>;
-                       };
+                       /* SI5382 - u48 */
                };
                i2c@5 {
                        #address-cells = <1>;