]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
arm64: dts: rk3399: Add upstream Pinephone Pro dts
authorPeter Robinson <pbrobinson@gmail.com>
Sat, 31 Dec 2022 09:23:59 +0000 (09:23 +0000)
committerKever Yang <kever.yang@rock-chips.com>
Mon, 16 Jan 2023 10:01:11 +0000 (18:01 +0800)
Initial support for the PinePhone Pro has now landed upstream in
Linux 6.1 RC1 so sync the dts from 6.2-rc1 for initial support.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
arch/arm/dts/Makefile
arch/arm/dts/rk3399-pinephone-pro.dts [new file with mode: 0644]

index 3349493c1b8ba292fc05ec7ec20a4786ee86e485..44256d9fa9404c60940b5867b59fe7be5941254b 100644 (file)
@@ -153,6 +153,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
        rk3399-nanopi-r4s.dtb \
        rk3399-orangepi.dtb \
        rk3399-pinebook-pro.dtb \
+       rk3399-pinephone-pro.dtb \
        rk3399-puma-haikou.dtb \
        rk3399-roc-pc.dtb \
        rk3399-roc-pc-mezzanine.dtb \
diff --git a/arch/arm/dts/rk3399-pinephone-pro.dts b/arch/arm/dts/rk3399-pinephone-pro.dts
new file mode 100644 (file)
index 0000000..04403a7
--- /dev/null
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Martijn Braam <martijn@brixit.nl>
+ * Copyright (c) 2021 Kamil TrzciƄski <ayufan@ayufan.eu>
+ */
+
+/*
+ * PinePhone Pro datasheet:
+ * https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+       model = "Pine64 PinePhonePro";
+       compatible = "pine64,pinephone-pro", "rockchip,rk3399";
+       chassis-type = "handset";
+
+       aliases {
+               mmc0 = &sdio0;
+               mmc1 = &sdmmc;
+               mmc2 = &sdhci;
+       };
+
+       chosen {
+               stdout-path = "serial2:115200n8";
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pwrbtn_pin>;
+
+               key-power {
+                       debounce-interval = <20>;
+                       gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+                       label = "Power";
+                       linux,code = <KEY_POWER>;
+                       wakeup-source;
+               };
+       };
+
+       vcc_sys: vcc-sys-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc_sys";
+               regulator-always-on;
+               regulator-boot-on;
+       };
+
+       vcc3v3_sys: vcc3v3-sys-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v3_sys";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               vin-supply = <&vcc_sys>;
+       };
+
+       vcca1v8_s3: vcc1v8-s3-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vcca1v8_s3";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               vin-supply = <&vcc3v3_sys>;
+               regulator-always-on;
+               regulator-boot-on;
+       };
+
+       vcc1v8_codec: vcc1v8-codec-regulator {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vcc1v8_codec_en>;
+               regulator-name = "vcc1v8_codec";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               vin-supply = <&vcc3v3_sys>;
+       };
+
+       wifi_pwrseq: sdio-wifi-pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               clocks = <&rk818 1>;
+               clock-names = "ext_clock";
+               pinctrl-names = "default";
+               pinctrl-0 = <&wifi_enable_h_pin>;
+               /*
+                * Wait between power-on and SDIO access for CYP43455
+                * POR circuit.
+                */
+               post-power-on-delay-ms = <110>;
+               /*
+                * Wait between consecutive toggles for CYP43455 CBUCK
+                * regulator discharge.
+                */
+               power-off-delay-us = <10000>;
+
+               /* WL_REG_ON on module */
+               reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+       };
+};
+
+&cpu_l0 {
+       cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+       cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+       cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+       cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+       cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+       cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+       status = "okay";
+};
+
+&i2c0 {
+       clock-frequency = <400000>;
+       i2c-scl-rising-time-ns = <168>;
+       i2c-scl-falling-time-ns = <4>;
+       status = "okay";
+
+       rk818: pmic@1c {
+               compatible = "rockchip,rk818";
+               reg = <0x1c>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
+               #clock-cells = <1>;
+               clock-output-names = "xin32k", "rk808-clkout2";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pmic_int_l>;
+               rockchip,system-power-controller;
+               wakeup-source;
+
+               vcc1-supply = <&vcc_sys>;
+               vcc2-supply = <&vcc_sys>;
+               vcc3-supply = <&vcc_sys>;
+               vcc4-supply = <&vcc_sys>;
+               vcc6-supply = <&vcc_sys>;
+               vcc7-supply = <&vcc3v3_sys>;
+               vcc8-supply = <&vcc_sys>;
+               vcc9-supply = <&vcc3v3_sys>;
+
+               regulators {
+                       vdd_cpu_l: DCDC_REG1 {
+                               regulator-name = "vdd_cpu_l";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <875000>;
+                               regulator-max-microvolt = <975000>;
+                               regulator-ramp-delay = <6001>;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vdd_center: DCDC_REG2 {
+                               regulator-name = "vdd_center";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1000000>;
+                               regulator-ramp-delay = <6001>;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vcc_ddr: DCDC_REG3 {
+                               regulator-name = "vcc_ddr";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                               };
+                       };
+
+                       vcc_1v8: DCDC_REG4 {
+                               regulator-name = "vcc_1v8";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                               };
+                       };
+
+                       vcca3v0_codec: LDO_REG1 {
+                               regulator-name = "vcca3v0_codec";
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+                       };
+
+                       vcc3v0_touch: LDO_REG2 {
+                               regulator-name = "vcc3v0_touch";
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+                       };
+
+                       vcca1v8_codec: LDO_REG3 {
+                               regulator-name = "vcca1v8_codec";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                       };
+
+                       rk818_pwr_on: LDO_REG4 {
+                               regulator-name = "rk818_pwr_on";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                               };
+                       };
+
+                       vcc_3v0: LDO_REG5 {
+                               regulator-name = "vcc_3v0";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                               };
+                       };
+
+                       vcc_1v5: LDO_REG6 {
+                               regulator-name = "vcc_1v5";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <1500000>;
+                               regulator-max-microvolt = <1500000>;
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                               };
+                       };
+
+                       vcc1v8_dvp: LDO_REG7 {
+                               regulator-name = "vcc1v8_dvp";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                       };
+
+                       vcc3v3_s3: LDO_REG8 {
+                               regulator-name = "vcc3v3_s3";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vccio_sd: LDO_REG9 {
+                               regulator-name = "vccio_sd";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       vcc3v3_s0: SWITCH_REG {
+                               regulator-name = "vcc3v3_s0";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                               };
+                       };
+               };
+       };
+
+       vdd_cpu_b: regulator@40 {
+               compatible = "silergy,syr827";
+               reg = <0x40>;
+               fcs,suspend-voltage-selector = <1>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vsel1_pin>;
+               regulator-name = "vdd_cpu_b";
+               regulator-min-microvolt = <875000>;
+               regulator-max-microvolt = <1150000>;
+               regulator-ramp-delay = <1000>;
+               regulator-always-on;
+               regulator-boot-on;
+
+               regulator-state-mem {
+                       regulator-off-in-suspend;
+               };
+       };
+
+       vdd_gpu: regulator@41 {
+               compatible = "silergy,syr828";
+               reg = <0x41>;
+               fcs,suspend-voltage-selector = <1>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vsel2_pin>;
+               regulator-name = "vdd_gpu";
+               regulator-min-microvolt = <875000>;
+               regulator-max-microvolt = <975000>;
+               regulator-ramp-delay = <1000>;
+               regulator-always-on;
+               regulator-boot-on;
+
+               regulator-state-mem {
+                       regulator-off-in-suspend;
+               };
+       };
+};
+
+&cluster0_opp {
+       opp04 {
+               status = "disabled";
+       };
+
+       opp05 {
+               status = "disabled";
+       };
+};
+
+&cluster1_opp {
+       opp06 {
+               opp-hz = /bits/ 64 <1500000000>;
+               opp-microvolt = <1100000 1100000 1150000>;
+       };
+
+       opp07 {
+               status = "disabled";
+       };
+};
+
+&io_domains {
+       bt656-supply = <&vcc1v8_dvp>;
+       audio-supply = <&vcca1v8_codec>;
+       sdmmc-supply = <&vccio_sd>;
+       gpio1830-supply = <&vcc_3v0>;
+       status = "okay";
+};
+
+&pmu_io_domains {
+       pmu1830-supply = <&vcc_1v8>;
+       status = "okay";
+};
+
+&pinctrl {
+       buttons {
+               pwrbtn_pin: pwrbtn-pin {
+                       rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
+       pmic {
+               pmic_int_l: pmic-int-l {
+                       rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+
+               vsel1_pin: vsel1-pin {
+                       rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+               };
+
+               vsel2_pin: vsel2-pin {
+                       rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+               };
+       };
+
+       sdio-pwrseq {
+               wifi_enable_h_pin: wifi-enable-h-pin {
+                       rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       sound {
+               vcc1v8_codec_en: vcc1v8-codec-en {
+                       rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+               };
+       };
+
+       wireless-bluetooth {
+               bt_wake_pin: bt-wake-pin {
+                       rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               bt_host_wake_pin: bt-host-wake-pin {
+                       rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               bt_reset_pin: bt-reset-pin {
+                       rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+};
+
+&sdio0 {
+       bus-width = <4>;
+       cap-sd-highspeed;
+       cap-sdio-irq;
+       disable-wp;
+       keep-power-in-suspend;
+       mmc-pwrseq = <&wifi_pwrseq>;
+       non-removable;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+       sd-uhs-sdr104;
+       status = "okay";
+};
+
+&sdmmc {
+       bus-width = <4>;
+       cap-sd-highspeed;
+       cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+       disable-wp;
+       max-frequency = <150000000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+       vmmc-supply = <&vcc3v3_sys>;
+       vqmmc-supply = <&vccio_sd>;
+       status = "okay";
+};
+
+&sdhci {
+       bus-width = <8>;
+       mmc-hs200-1_8v;
+       non-removable;
+       status = "okay";
+};
+
+&tsadc {
+       rockchip,hw-tshut-mode = <1>;
+       rockchip,hw-tshut-polarity = <1>;
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+       uart-has-rtscts;
+       status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm4345c5";
+               clocks = <&rk818 1>;
+               clock-names = "lpo";
+               device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+               host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+               max-speed = <1500000>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
+               shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+               vbat-supply = <&vcc3v3_sys>;
+               vddio-supply = <&vcc_1v8>;
+       };
+};
+
+&uart2 {
+       status = "okay";
+};