arm: dts: stm32mp15: remove duplicate uart nodes

Remove duplicated uart nodes introduced with commit 62f95af92a3f
("ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4"),
because the uart nodes wasn't correctly ordered in alphabetic order.

Only cosmetic: the generated device tree don't change.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index dd4bd1e55433b1c25fe152873e79685b976cc8b8..20a59e8f7a33fc380832e4a880471dbfdfd14f57 100644 (file)
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -1971,86 +1971,6 @@
                };
        };
 
-       uart4_pins_a: uart4-0 {
-               pins1 {
-                       pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
-                       bias-disable;
-                       drive-push-pull;
-                       slew-rate = <0>;
-               };
-               pins2 {
-                       pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-                       bias-disable;
-               };
-       };
-
-       uart4_pins_b: uart4-1 {
-               pins1 {
-                       pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
-                       bias-disable;
-                       drive-push-pull;
-                       slew-rate = <0>;
-               };
-               pins2 {
-                       pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-                       bias-disable;
-               };
-       };
-
-       uart4_pins_c: uart4-2 {
-               pins1 {
-                       pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
-                       bias-disable;
-                       drive-push-pull;
-                       slew-rate = <0>;
-               };
-               pins2 {
-                       pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-                       bias-disable;
-               };
-       };
-
-       uart7_pins_a: uart7-0 {
-               pins1 {
-                       pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
-                       bias-disable;
-                       drive-push-pull;
-                       slew-rate = <0>;
-               };
-               pins2 {
-                       pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
-                                <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
-                                <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
-                       bias-disable;
-               };
-       };
-
-       uart7_pins_b: uart7-1 {
-               pins1 {
-                       pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
-                       bias-disable;
-                       drive-push-pull;
-                       slew-rate = <0>;
-               };
-               pins2 {
-                       pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
-                       bias-disable;
-               };
-       };
-
-       uart8_pins_a: uart8-0 {
-               pins1 {
-                       pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
-                       bias-disable;
-                       drive-push-pull;
-                       slew-rate = <0>;
-               };
-               pins2 {
-                       pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
-                       bias-disable;
-               };
-       };
-
        usbotg_hs_pins_a: usbotg-hs-0 {
                pins {
                        pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */