]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2016-02-24 Marek Vasutusb: ehci: Be explicit about the BE IO accessors
2016-02-24 Marek Vasutusb: ehci: Clear USBMODE_BE on LE MMIO
2016-02-24 Marek Vasutusb: ehci: Implement V2P mapping
2016-02-24 Marek Vasutusb: ehci: Use map_physmem in ehci-generic
2016-02-23 Tom RiniMerge branch 'master' of http://git.denx.de/u-boot...
2016-02-23 Jelle van der Waasunxi: H3: Add support for the host usb-phys
2016-02-23 Jelle van der Waasunxi: power: add support for sy8106a driver
2016-02-23 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-spi
2016-02-23 Christophe... spi: spi-uclass: Set slave wordlen with SPI_DEFAULT_WORDLEN
2016-02-23 Christophe... spi: omap3: Remove unused variable irqstatus in omap3_s...
2016-02-23 Mugunthan V Ndefconfig: am437x_sk_evm: enable dma driver model
2016-02-23 Mugunthan V Ndrivers: dma: ti-edma3: convert driver to adopt driver...
2016-02-23 Mugunthan V Nspi: ti_qspi: compile out spi_flash_copy_mmap when...
2016-02-23 Mugunthan V Nsf: spi_flash: use dma to copy data from mmap region...
2016-02-23 Mugunthan V Ndma: Kconfig: Add TI_EDMA3 entry
2016-02-23 Mugunthan V Ndm: implement a DMA uclass
2016-02-23 Michal SimekARM: zynq: Wire-up saving environment to QSPI
2016-02-22 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-video
2016-02-22 Marek Vasutvideo: Add S3C24xx framebuffer support
2016-02-22 Michal SimekARM: zynq: Enable EDID for zybo
2016-02-22 Michal SimekARM: zynq: Add reset-gpio property for USB on Zybo
2016-02-22 Michal Simeknet: phy: realtek: Use generic genphy_parse_link()...
2016-02-22 Michal SimekARM: zynq: Enable Realtek phys by default
2016-02-22 Michal Simeki2c: spd: Extend SPD memory types
2016-02-22 Michal Simekdm: ns16550: Add support for reg-offset property
2016-02-22 Jason Wuzynq-common: Fix usbboot env variable
2016-02-22 Michal SimekARM: zynq: Enable SPL RAM support by default
2016-02-22 Nathan RossiARM: zynq: Enable u-boot,dm-pre-reloc for qspi
2016-02-22 Michal Simekserial: zynq: Change logic in putc
2016-02-22 Michal SimekARM: zynq: Remove ZYNQ_BOOT_FREEBSD option
2016-02-22 Michal SimekARM: zynq: Read memory size setting from DT
2016-02-22 Michal Simekmmc: Kconfig: Add Arasan SDHCI entry
2016-02-22 Michal Simekzynq: zc770: Remove unused ifdefs for xm011 and xm013
2016-02-22 Michal SimekARM: zynq: Remove unused SPI base addresses
2016-02-22 Simon Glassvideo: freetype: Fix a memory leak with a bad parameter
2016-02-22 Simon Glassvideo: truetype: Fix a memory leak on error
2016-02-21 Tom RiniMerge branch 'master' of git://www.denx.de/git/u-boot-imx
2016-02-21 Peng Fanimx: mx7d: isolate resources to domain 0 for A7 core
2016-02-21 Peng Fanimx: mx7dsabresd: add command and macros for boot m4...
2016-02-21 Peng Fanimx: mx7: implement functions to boot auxiliary core
2016-02-21 Peng Fanimx: mx6sxsabresd: add command and macros for boot...
2016-02-21 Peng Fanimx: mx6: implement functions to boot auxiliary core
2016-02-21 Peng Fanimx: imx-common: introduce boot auxiliary core
2016-02-21 Peng Fanimx: mx7d: clock support for RDC
2016-02-21 Peng Fanimx: mx7d: Add RDC support
2016-02-21 Peng Fanimx: mx6sx Add RDC mappings of masters and peripherals
2016-02-21 Peng Fanimx: imx-common: introduce Resource Domain Controller...
2016-02-21 Peng Fanimx: mx6: introduce rdc regs
2016-02-21 Julien CORJONimx: mx6quq7: add sd card detection
2016-02-21 Julien CORJONimx: mx6quq7: specify max_bus_witdh directly in usdhc_cfg
2016-02-21 Julien CORJONimx: mx6quq7: fix USDHC4 declaration
2016-02-21 Soeren Mochboard: tbs2910: Autoselect environment device when...
2016-02-21 Soeren Mochimx: mx6: Implement mmc_get_env_part
2016-02-21 Peng Fanpinctrl: imx: Support i.MX7D
2016-02-21 Peng Fanpinctrl: imx: Introduce pinctrl driver for i.MX6
2016-02-21 Ulises Cardenasimx: Refactoring CAAM Job Ring structure and Secure...
2016-02-21 Fabio Estevammx7dsabresd: Make 'ums' command functional
2016-02-21 Fabio Estevammx7dsabresd: Use Adrian's NXP email address
2016-02-21 Fabio Estevammx6ul_14x14_evk: Select CONFIG_FSL_QSPI
2016-02-21 Andreas Bießmannmxsboot: remove unused include
2016-02-21 Bin Mengx86: doc: Update to include Intel Bayley Bay board...
2016-02-21 Bin Mengx86: Add Intel Cougar Canyon 2 board
2016-02-21 Bin Mengx86: ivybridge: bd82x6x: Support FSP enabled configuration
2016-02-21 Bin Mengx86: fsp: Make sure HOB list is not overwritten by...
2016-02-21 Bin Mengsuperio: Add SMSC SIO1007 driver
2016-02-21 Bin Mengx86: ivybridge: Add FSP support
2016-02-21 Stephen Warrenx86: fix memalign() parameter order
2016-02-20 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-atmel
2016-02-20 Andreas Bießmannvinco: add Maintainers file
2016-02-20 Alexey Brodkinarc: cache - utilize IO coherency (AKA IOC) engine
2016-02-20 Alexey Brodkinarc: cache - accommodate different L1 cache line lengths
2016-02-19 Guillaume GARDETspl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS
2016-02-19 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-tegra
2016-02-19 Gregory CLEMENTARM: Add Support for the VInCo platform
2016-02-18 Samuel MescoffARM: at91: sama5d2: configure the L2 cache memory
2016-02-18 Marek Vasutarm: at91: Add support for DENX MA5D4 SoM and EVK
2016-02-18 Matthias Michelsiemens,at91: enable features for smartweb
2016-02-18 Wenyou Yangboard: atmel: clean up the PMC_PLLICPR init code
2016-02-18 Wenyou YangARM: at91: clean up the PMC_PLLICPR init code
2016-02-18 Wenyou YangARM: at91: clock: add PMC_PLLICPR init function
2016-02-18 Wenyou Yangboard: atmel: siemens: clean up PLLB code
2016-02-18 Wenyou Yangdrivers: usb: ohci-at91: clean up the PLLB code
2016-02-18 Wenyou YangARM: at91: clock: add PLLB enable/disable functions
2016-02-18 Wenyou Yangboard: atmel: siemens: clean up UTMI PLL code
2016-02-18 Wenyou Yangdrivers: usb: atmel: clean up the UTMI PLL code
2016-02-18 Wenyou YangARM: at91: armv7: clean up UTMI PLL handle code
2016-02-18 Wenyou YangARM: at91: clock: add UTMI PLL enable/disable function
2016-02-18 Wenyou Yangdrivers: at91: clean up peripheral clock code
2016-02-18 Wenyou Yangboard: atmel: clean up peripheral clock code
2016-02-18 Wenyou YangARM: cpu: at91: clean up peripheral clock code
2016-02-18 Wenyou YangARM: at91: clock: add a new file to handle clock
2016-02-18 Wenyou YangARM: at91: asm/at91_pmc.h: fix trival register offset
2016-02-18 Stefan Roesenet: phy: marvell: Fix problem with phy_reset() clearin...
2016-02-18 Stefan Roesenet: phy: marvell: Call phy_reset() where possible
2016-02-18 Stephen WarrenARM: tegra: enable USB device mode port on Dalmore
2016-02-18 Stephen WarrenARM: tegra: don't set CONFIG_USB_MAX_CONTROLLER_COUNT
2016-02-17 Simon Glassvideo: tegra: Correct a Kconfig warning with VIDCONSOLE...
2016-02-16 Simon Glasstegra: video: Clean up the old LCD/PWM driver code
2016-02-16 Simon Glasstegra: video: Move LCD driver to use the DM PWM driver
2016-02-16 Simon Glasstegra: Convert CONFIG_PWM_TEGRA to Kconfig
next