]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2018-10-06 Stephen Warrentest/py: ignore console read exceptions after test...
2018-10-06 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-sh
2018-10-06 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-socfpga
2018-10-05 Tom RiniMerge tag 'rockchip-for-v2018.11-rc2' of git://git...
2018-10-05 Tom RiniMerge tag 'arc-updates-for-2018.11-rc2' of git://git...
2018-10-05 Alexey Brodkinarc: Add support for IoT development kit
2018-10-05 Alexey BrodkinARC: Enable DISPLAY_CPUINFO & DISPLAY_BOARDINFO
2018-10-05 Alexey BrodkinARC: Implement print_cpuinfo()
2018-10-05 Alexey BrodkinARC: Add model property to boards .dts
2018-10-05 Alexey BrodkinARC: Don't pre-define CROSS_COMPILE
2018-10-04 Daniel Gröberrockchip: Fix rkimage format for SPL boot over USB
2018-10-04 Andreas Färberrockchip: make_fit_atf.py depends on u-boot
2018-10-04 Janine Hagemannnet: gmac_rockchip: Add handling for RGMII_ID/RXID...
2018-10-04 Janine Hagemannnet: gmac_rockchip: Fix a register write in rk3328_gmac...
2018-10-04 Mian Yousaf... rockchip: make_fit_atf: make python3 compatible
2018-10-04 Mian Yousaf... rockchip: make_fit_atf: use elf entry point
2018-10-04 Kever Yangrockchip: add fit source file for pack itb with op-tee
2018-10-04 Kever Yangspl: add support to booting with OP-TEE
2018-10-04 Kever Yangrockchip: make_fit_atf: fix warning unit_address_vs_reg
2018-10-04 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-spi
2018-10-04 Stefan Roesespi: Add SPI driver for MT76xx SoCs
2018-10-04 Stefan Roesemtd: nand: spi: Add Gigadevice SPI NAND support
2018-10-04 Stefan Roesesf: Add XMC xm25qh64a and xm25qh128a entries
2018-10-03 Tom RiniMerge tag 'rockchip-for-v2018.11' of git://git.denx...
2018-10-03 Tom RiniMerge git://git.denx.de/u-boot-riscv
2018-10-03 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-i2c
2018-10-03 Ooi, Joycearm: socfpga: stratix10: add sgmii in phymode setup
2018-10-03 Ley Foon Tanarm: socfpga: Remove unused function socfpga_emac_manag...
2018-10-03 Atsushi Nemototools: socfpga: fix sfp_verify_header
2018-10-03 Ley Foon Tangpio: dwapb_gpio: Change to use devm_kcalloc()
2018-10-03 Marek VasutARM: rmobile: Enable PHY framework on Gen3
2018-10-03 Marek Vasutphy: rcar: Add R-Car Gen3 PHY driver
2018-10-03 Marek VasutARM: rmobile: Mark 4-64GiB as DRAM on Gen3
2018-10-03 Marek VasutARM: rmobile: Repair TMU clock on Gen2
2018-10-03 Marek VasutARM: dts: rmobile: Reinstate missing i2c6 on Porter
2018-10-03 Heinrich Schuchardtriscv: allow native compilation
2018-10-03 Rick Chenriscv: cosmetic: Reword do_reset() printf message.
2018-10-03 Bin Mengriscv: Move do_reset() to a common place
2018-10-03 Bin Mengriscv: Add QEMU virt board support
2018-10-03 Bin Mengriscv: kconfig: Imply DM support for some common drivers
2018-10-03 Bin Mengriscv: kconfig: Select DM and OF_CONTROL
2018-10-03 Bin Mengriscv: ae350: Clean up mixed tabs and spaces in the dts
2018-10-03 Bin Mengriscv: Make start.S available for all targets
2018-10-03 Bin Mengriscv: bootm: Pass mhartid CSR value to kernel
2018-10-03 Bin Mengriscv: Remove CSR read/write defines in encoding.h
2018-10-03 Bin Mengriscv: Add a helper routine to print CPU information
2018-10-03 Bin Mengriscv: Explicitly pass -march and -mabi to the compiler
2018-10-03 Bin Mengriscv: Fix coding style issues in the linker script
2018-10-03 Bin Mengriscv: Move the linker script to the CPU root directory
2018-10-03 Bin Mengriscv: cmd: bdinfo: Print the relocation address
2018-10-03 Bin Mengriscv: Remove mach type
2018-10-03 Bin Mengriscv: bootm: Correct the 1st kernel argument to hart id
2018-10-03 Bin Mengriscv: Remove setup.h
2018-10-03 Bin Mengriscv: kconfig: Normalize architecture name spelling
2018-10-03 Liviu Dudaui2c: Add support for the Arm's Versatile Express I2C...
2018-10-02 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-spi
2018-10-02 Marek Vasutspi: sh_qspi: Add DM support to SH QSPI driver
2018-10-02 Ashish Kumardriver/spi: fsl_qspi: Remove non-DM stuff
2018-10-02 Ley Foon Tanspi: designware_spi: Add reset ctrl to driver
2018-10-02 Miquel Raynalcmd: mtdparts: describe as legacy
2018-10-02 Miquel Raynalcmd: ubi: clean the partition handling
2018-10-02 Miquel Raynalcmd: mtd: add 'mtd' command
2018-10-02 Miquel Raynalmtd: mtdpart: implement proper partition handling
2018-10-02 Miquel Raynalmtd: uboot: search for an equivalent MTD name with...
2018-10-02 Miquel Raynalmtd: mtdpart: add a generic mtdparts-like parser
2018-10-02 Miquel Raynalmtd: uclass: add probe function
2018-10-02 Miquel Raynaldm: drop unused helper in MTD header
2018-10-02 Heiko Stuebnerrockchip: rk3188: explicitly set vcc_sd0 pin to gpio...
2018-10-02 Heiko Stuebnerrockchip: rk3188: add u-boot-specific mmc properties
2018-10-02 Heiko Stuebnerrockchip: dwmmc: add rk2928-dw-mshc compatible
2018-10-02 Heiko Stuebnermmc: dw_mmc: check fifo status with a timeout in fifo...
2018-10-02 Tom RiniPrepare v2018.11-rc1
2018-10-01 Eugen HristevMAINTAINERS: at91: update entry for at91 boards
2018-09-30 Tom RiniMerge git://git.denx.de/u-boot-dm
2018-09-30 Tom RiniMAINTAINERS: Update some entries for missed boards
2018-09-30 Marek Vasutfs: btrfs: Fix cache alignment bugs
2018-09-30 Ramon Friedusb:ci_udc: don't overwrite configuration on pullup
2018-09-30 Ramon Frieddb410c: automatically launch fastboot
2018-09-30 Ramon FriedDB410c: Enable fastboot support
2018-09-30 Ramon Friedusb: ehci-msm: Add init_after_reset for CI_UDC
2018-09-30 Ramon Friedusb:ci_udc: Introduce init_after_reset phy function
2018-09-30 Ramon Friedehci: msm: use init_type in probe
2018-09-30 Ramon Friedehci: msm: switch to generic PHY uclass
2018-09-30 Ramon Friedconfigs: db410c: Enable USB PHY
2018-09-30 Ramon Frieddts: db410c: Add bindings for MSM USB phy
2018-09-30 Ramon Friedphy: db410c: Add MSM USB PHY driver
2018-09-30 Ramon Frieddb410c: serial# env using msm board serial
2018-09-30 Ramon Frieddts: db410c: add alias for USB
2018-09-30 Ramon Friedehci: msm: Add missing platdata
2018-09-30 Ramon Friedehci: Replace board_prepare_usb with board_usb_init
2018-09-30 Patrice Chotardserial: serial_stm32: Enable uart FIFO for STM32F7xx...
2018-09-30 Neil Staintonu-boot: align cache flushes in load_elf_image_shdr...
2018-09-30 Masahiro Yamadakbuild: fix # escaping in appending U-Boot own DT
2018-09-30 Rasmus VillemoesKbuild: fix # escaping in .cmd files for future Make
2018-09-30 Alex Kiernanspl: mmc: Report device number when we fail
2018-09-30 Liviu Dudauclk: Add support for Arm's Versatile Express OSC clock...
2018-09-30 Neil Staintoncmd: env: Fix CRC calculation for 'env export -c -s'
2018-09-30 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-video
2018-09-29 Rajan Vajadm: test: Add "/firmware" node scan test
2018-09-29 Rajan Vajafirmware: Add FIRMWARE config prompt string
next