]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2009-06-12 Vivek Mahajanmpc8xxx: USB: Removed reenablement of its interface
2009-06-12 Peter Tyser83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x
2009-06-12 Peter Tyser83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
2009-06-12 Stefan Roesempc512x: Use serial_setbrg() in serial_init() to not...
2009-06-12 Stefan Roesempc512x: Fix PSC divisor calculation for baudrate setting
2009-06-12 Wolfgang DenkMPC512x: add support for ARIA board
2009-06-12 Wolfgang DenkMPC512x: remove include/mpc512x.h
2009-06-12 Wolfgang DenkMPC512x FEC: get rid of duplicated struct ethernet_regs
2009-06-12 Wolfgang DenkMPC512x: use I/O accessors instead of pointer accesses
2009-06-12 Wolfgang DenkMPC512x: add more hardware description to immap_512x.h
2009-06-12 Wolfgang DenkRename ads5121 board into mpc5121ads
2009-06-12 Wolfgang Denkcpu/mpc512x/diu.c: fix warning: assignment from incompa...
2009-06-12 Wolfgang Denkcpu/mpc512x/pci.c: minor coding style cleanup
2009-06-12 Wolfgang Denkmpc512x: Move common files to share them by several...
2009-06-12 Wolfgang Denkmpc512x: change cpu/mpc512x/Makefile to use Kconfig...
2009-06-12 Wolfgang DenkGeneral help message cleanup
2009-06-12 Wolfgang DenkMake "usage" messages more helpful.
2009-06-12 Mike Frysingernvedit: speed up printing of environment
2009-06-12 Jean-Christophe... config.mk: remove un-needed REMOTE_BUILD check
2009-06-12 Tom RixFAT replace compare_sign with strncmp.
2009-06-12 Mike FrysingerAdd support for Linux-like kallsysms
2009-06-12 Wolfgang Denkcmd_mtdparts.c: allow to omit definitions for default...
2009-06-12 Stefan Roesecmd_mtdparts: Move to common handling of FLASH devices...
2009-06-12 Stefan Roesemtd: Introduce CONFIG_MTD_DEVICE to select compilation...
2009-06-12 Stefan Roesemtd: MTD related config header changes (mtdparts command)
2009-06-12 Stefan Roesemtd: Update MTD infrastructure to support 64bit device...
2009-06-12 Stefan Roesemtd: Add MTD concat support to concatenate multiple...
2009-06-12 Jean-Christophe... make MODEM SUPPORT generic instead of duplicate it
2009-06-12 Tom RixZOOM2 detect the version of the zoom2 board at runtime.
2009-06-12 Tom RixBeagle Convert the board version detection to use the...
2009-06-12 Tom RixFix a typo in the instructions on using omap3's gpio...
2009-06-12 Tom RixZOOM2 Define GPIO banks used.
2009-06-12 Tom RixOMAP3 Turn on the GPIO bank clocks
2009-06-12 Richard RetanubunColdfire M5271: Activate u-boot system timer interrupt.
2009-06-12 Richard RetanubunCompier warning cleanup
2009-06-12 Richard RetanubunAdds WATCHDOG_RESET() function call to lib_m68k dtimer_...
2009-06-12 Prafulla Wadaskararch_misc_init support for ARM architectures
2009-06-12 Jean-Christophe... at91: move cpu info print to cpu
2009-06-12 Jean-Christophe... at91: move cpu name define to arm/arch/ cpu header
2009-06-12 Jean-Christophe... at91: extract reset from timer
2009-06-12 Jean-Christophe... omap24xx: rename reset file
2009-06-12 Dirk BehmeOMAP3: Fix CKE1 MUX setting to allow self-refresh
2009-06-12 Dirk BehmeOMAP3: Zoom2: Enable Board and CPU info
2009-06-12 Tom RixZOOM2 Add led support.
2009-06-12 Tom RixZOOM2 Add serial support.
2009-06-12 Jean-Christophe... lh7a40x: move serial driver to drivers/serial
2009-06-12 Jean-Christophe... pxa: move serial driver to drivers/serial
2009-06-12 Jean-Christophe... arm: remove cpu_init
2009-06-12 Jean-Christophe... arm: unify interrupt init
2009-06-12 Jean-Christophe... arm: unify linker script
2009-06-12 Jean-Christophe... afeb9260: fix macb device init
2009-06-12 Stefan Roeseppc4xx: Remove PCI async bootup message if PCI is not...
2009-06-12 Wolfgang DenkTQM834x: use buffered writes to accelerate writing...
2009-06-12 Wolfgang DenkTQM834x: add FDT support
2009-06-12 Wolfgang DenkTQM834x: fix environment size; add redundant env.
2009-06-12 Thomas LangeARM DaVinci: Reset with watchdog enabled
2009-06-12 Wolfgang Denkvideo: Add an option to skip video initialization
2009-06-12 Wolfgang Denkdrv_video_init(): simplify logic
2009-06-12 Jean-Christophe... at91: regroup IP hw init in one file per soc
2009-06-12 David Brownelldm355 evm support
2009-06-12 Sanjeev PremiOMAP3EVM: Set default bootfile
2009-06-12 s-paulraj@ti.comARM DaVinci: Minor Updates to base addresses
2009-06-12 Tom RixZOOM2 Add support for debug board detection.
2009-06-12 Tom RixOMAP3 Port kernel omap gpio interface.
2009-06-12 Tom RixZOOM2 Add initial support for Zoom2
2009-06-12 Sandeep PaulrajARM DaVinci:Consolidate common u-boot.lds
2009-06-12 Tom RixOMAP Consolidate common u-boot.lds to cpu layer.
2009-06-12 Jean-Christophe... arm/dcc: add xscale support
2009-06-12 Jean-Christophe... arm/dcc: use static support to allow to use it at anytime
2009-06-12 Jean-Christophe... ARM: Update mach-types
2009-06-12 Jean-Christophe... arm920/926/926: remove non needed header
2009-06-12 David Brownelldavinci dm6446evm NAND update
2009-06-12 David Brownelldavinci: display correct clock info
2009-06-12 Tom RixZOOM1 Remove more legacy NAND defines.
2009-06-12 Tom RixLED Add documentation describing the status_led and...
2009-06-12 Tom RixARM Add blue colour LED to status_led.
2009-06-12 Jean-Christophe... arm: timer and interrupt init rework
2009-06-12 Jean-Christophe... OMAP3: Reorganize Makefile style
2009-06-12 Jean-Christophe... OMAP3: Remove dublicated interrupt code
2009-06-12 Jean-Christophe... at91rm9200: move reset code to reset.c
2009-06-12 Jean-Christophe... ixp/interrupts: Move conditional compilation to Makefile
2009-06-12 Jean-Christophe... arm: cleanup remaining CONFIG_INIT_CRITICAL
2009-06-12 Jean-Christophe... arm946es: remove non used timer
2009-06-12 David Brownelldavinci: add basic dm355/dm350/dm335 support
2009-06-12 David Brownelldavinci: fix dm644x buglets
2009-06-12 David Brownelldavinci: split out some dm644x-specific bits from psc
2009-06-12 David Brownelldavinci: cpu-specific build uses conditional make syntax
2009-06-12 David Brownelldavinci: move psc support board-->cpu
2009-06-12 David BrownellDaVinci now respects SKIP_LOWLEVEL_INIT
2009-06-12 David BrownellDaVinci Ethernet cleanup
2009-06-12 Stefan Roeselib_arch/board.c: Move malloc initialization before...
2009-06-12 Stefan Roeseppc4xx: Add Sequoia RAM-booting target
2009-06-12 Mike Frysingertools/envcrc: add --binary option to export embedded env
2009-06-12 Ben WarrenEnable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 Matthias Fuchs4xx: Add support for DP405 hardware variants
2009-06-12 Matthias Fuchs4xx: Remove binary cpld bitstream from DP405 board
2009-06-12 Matthias Fuchs4xx: Remove binary cpld bitstream from VOM405 board
2009-06-12 Matthias Fuchs4xx: Remove binary cpld bitstream from PMC405 board
2009-06-12 Matthias Fuchs4xx: Remove binary cpld bitstream from CMS700 board
2009-06-12 Matthias Fuchsesd/common: extend cpld command with address parameter
next