]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2012-09-01 Otavio SalvadorMX28: use a clear name for DDR2 initialization
2012-09-01 Veli-Pekka... Add support for Bluegiga APX4 Development Kit
2012-09-01 Otavio SalvadorMX28: extend print_cpuinfo() to use chip information
2012-09-01 Marek VasutMX28: SPI: Add DMA transfer support
2012-09-01 Marek VasutMX28: SPI: Pull out the PIO transfer function
2012-09-01 Marek VasutMX28: SPI: Refactor spi_xfer a bit
2012-09-01 Otavio Salvadorimx: Use a clear identification of an unidentified...
2012-09-01 Markus Hubigat91: Add support for taskit AT91SAM9G20 boards.
2012-09-01 Markus HubigEnable the EMAC clock in at91_macb_hw_init().
2012-09-01 Andreas BießmannMAINTAINERS: fix Andreas Bießmann AVR32 entry
2012-09-01 Andreas BießmannMAINTAINERS: fix entry of Ilko Iliev
2012-09-01 Bo Shenarm : Atmel : add at91sam9x5ek board support
2012-09-01 Andreas Bießmanndoc/git-mailrc: update at91 and avr32
2012-09-01 Ilya Yanokam335x_evm: enable SMSC PHY driver
2012-09-01 Enric Balletbò... OMAP3: fix DRAM size for IGEP-based boards.
2012-09-01 Laurence WithersDaVinci DA8xx: fix set_cpu_clk_info()
2012-09-01 Laurence WithersDaVinci DA8xx: replace magic number for DDR speed
2012-09-01 Laurence WithersDaVinci DA850: UART2 clock ID comes from ASYNC3
2012-09-01 Laurence WithersDaVinci DA8xx: tidy up clock ID definition
2012-09-01 Tom Rinidoc/git-mailrc: Update 'ti' alias
2012-09-01 Marek Vasutdm: Move OMAP GPIO driver to drivers/gpio/
2012-09-01 Marek Vasutdm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
2012-09-01 Tom Riniam33xx: Rework pinmux functions
2012-09-01 Tom Riniam33xx evm: Add CONFIG_CMD_EEPROM and related
2012-09-01 Tom Riniam33xx: Add support for TI AM335x StarterKit EVM
2012-09-01 Tom Riniam33xx: Remove board/ti/am335x/evm.c
2012-09-01 Tom Riniam33xx: Add DDR3 (Micron MT41J128M16JT-125) timings...
2012-09-01 Tom Riniam33xx: Rework config_ddr to make DDR3 support easier.
2012-09-01 Tom Riniam33xx: Move some variables in emif4.c, mark them static.
2012-09-01 Tom Riniam33xx: Correct and clean up ddr_regs struct
2012-09-01 Tom Riniam33xx: Do not touch 'ratio1' fields
2012-09-01 Tom Riniam33xx: Rework config_io_ctrl slightly
2012-09-01 Tom Riniam33xx: Use emif_regs struct for storing initialization...
2012-09-01 Tom Riniam33xx: Turn a number of 'int' functions to 'void'
2012-09-01 Tom Riniam33xx: Document what we're doing with ddrctrl->ddrckectrl
2012-09-01 Vaibhav Bediaam335x: ddr_defs: Update EMIF parameters
2012-09-01 Tom Riniam33xx: Clean up unused DDR defines, prefix more with...
2012-09-01 Tom Riniam33xx: Move the call to ddr_pll_config, make it take...
2012-09-01 Tom Riniam33xx: Pass to config_ddr the type of memory that...
2012-09-01 Tom Riniam33xx: Make config_cmd_ctrl / config_ddr_data take...
2012-09-01 Tom Riniam33xx: Rework DDR2 EMIF initalization slightly
2012-09-01 Tom Riniam33xx: Bugfix to config_sdram()
2012-09-01 Tom Riniam33xx: Remove extra check in enable_ddr_clocks
2012-09-01 Tom Riniam33xx: Convert to using <asm/emif.h> to describe the...
2012-09-01 Tom Riniam33xx: Remove DMM_BASE define
2012-09-01 Tom Riniam335x_evm: Update config for common usage
2012-09-01 Tom Riniam33xx: Enable gpio0 clock
2012-09-01 Javier Martinez... OMAP3: igep00x0: add SPL support for IGEP-based boards
2012-09-01 Javier Martinez... OMAP3: mem: Add Numonyx OneNAND 200MHz timing information
2012-09-01 Javier Martinez... OMAP3: igep00x0: Add config option to choose flash...
2012-09-01 Chandan Natham335x_evm: CPSW support
2012-09-01 Ilya Yanokam335x_evm: read the on-board EEPROM
2012-09-01 Chandan Natham33xx: pin mux defintions for CPSW switch
2012-09-01 Chandan Natham33xx: CPSW init and definitions
2012-09-01 Cyril Chemparathycpsw: add driver for cpsw ethernet device
2012-09-01 Peter Meerwaldbeagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3
2012-09-01 Mikhail Kshevetskiyserial/ns16550: ns16550 has a different register layout...
2012-09-01 Mikhail Kshevetskiyarm/davinci/da850: add uart0 pinmux
2012-09-01 Mikhail Kshevetskiyarm/davinci: fix DDR2/mDDR memory controller initializa...
2012-09-01 Albert ARIBAUDRevert "arm: armv7: add compile option -mno-unaligned...
2012-09-01 Steve Sakomanomap: am335x_evm: enable i2c1 channel
2012-09-01 Peter Meerwaldbeagle: removed unused pr_debug #define
2012-09-01 Peter Meerwaldbeagle: fix termination of buddy env setting
2012-09-01 Peter Meerwaldbeagle: make get_expansion_id(), get_board_revision...
2012-09-01 Javier Martinez... igep00x0: default mmcrootfstype to EXT4
2012-09-01 Javier Martinez... igep00x0: default to OMAP-specific serial driver
2012-09-01 Lad, Prabhakarda850/omap-l138: add support for direct NOR boot mode
2012-09-01 Lad, Prabhakarda850/omap-l138: Add support for NAND SPL
2012-09-01 Lad, Prabhakarda850/omap-l138: Fix NAND flash timings
2012-09-01 Lad, Prabhakarda850/omap-l138: Add support to read u-boot image from...
2012-09-01 Lad, Prabhakarda850/omap-l138: Define SPI specific configs for SPL...
2012-09-01 Lad, Prabhakararm, davinci: perform check for initializing global...
2012-09-01 Rajashekhara... da850/omap-l138: Make MMC and NOR support mutually...
2012-09-01 Rajashekhara... da850/omap-l138: modifications for Logic PD Rev.3 AM18x...
2012-09-01 Lad, Prabhakarda850/omap-l138: Add MMC support for DA850/OMAP-L138
2012-09-01 Steve Sakomanomap: am33xx: enable gpio support
2012-09-01 Steve Sakomanomap: am335x_evm: remove unused definitions
2012-09-01 Stefano BabicOMAP3: mcx: read hot-water-button after reset
2012-09-01 Stefano BabicOMAP3: mcx: updated default environment
2012-09-01 Stefano BabicOMAP3: mcx: set pinmux for uart4
2012-09-01 Stefano Babicmcx: increased buffer for command line
2012-09-01 Igor Grinbergarm: omap3: cm-t35: minor comment and printf change
2012-09-01 Sughosh Ganuhawkboard/omapl-138: Add support for generating ais...
2012-09-01 Ilya Yanokomap24xx_i2c: add 2-byte address support
2012-09-01 Jeremy AndrusCREDITS: Add credits for MCF5249 initialization code
2012-09-01 Stefan RoeseConsolidate bootcount code into drivers/bootcount
2012-09-01 Anatolij Gustschinmpc52xx: remove o2dnt board
2012-09-01 Anatolij Gustschinmpc52xx: add common o2dnt and o2dnt2 support and config...
2012-09-01 Anatolij Gustschinmpc5xxx: add GPIO port configuration
2012-09-01 Anatolij Gustschinmpc5xxx: add pci_mpc5xxx_init prototype to common header
2012-09-01 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-sh
2012-09-01 Wolfgang DenkMerge branch 'sf' of git://git.denx.de/u-boot-blackfin
2012-08-21 Nobuhiro Iwamatsush: tmu: Removed arch/sh/include/asm/clk.h
2012-08-21 Nobuhiro Iwamatsush: tmu: Changed switch statement to shift operation
2012-08-21 Nobuhiro Iwamatsush: tmu: Changed TMU driver using array of structures
2012-08-17 Scott WoodMakefile: fix HAVE_VENDOR_COMMON_LIB
2012-08-14 Michal Simeksf: spansion: Add support for S25FL256S
2012-08-14 Stephen Warrensf: winbond: fix page_size
2012-08-13 Holger Brunckmtd/cfi_flash: fix write problems for Numonyx P33/30...
2012-08-13 Anatolij Gustschincfi_flash: add support for Spansion flash PPB sector...
next