]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2016-12-22 Jaehoon Chungconfigs: enable the DM_PMIC and DM_I2C_GPIO for max8998...
2016-12-22 Jaehoon Chungarm: dts: s5pc1xx-goni: add the pmic node for using DM
2016-12-22 Jaehoon Chungpower: pmic: add the max8998 controller for DM
2016-12-21 Konstantin... arm64: mvebu: Fix A8K memory mapping and add documentation
2016-12-20 Tom RiniMerge git://git.denx.de/u-boot-mpc85xx
2016-12-20 Chris Packhampowerpc: Retain compatible property for L2 cache
2016-12-20 Tom RiniMerge branch 'master' of git://www.denx.de/git/u-boot...
2016-12-20 Tom RiniMerge git://git.denx.de/u-boot-dm
2016-12-20 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-i2c
2016-12-20 Nathan RossiARM64: zynqmp: Replace board specific with generic...
2016-12-20 Nathan RossiARM: zynq: Replace board specific with generic memory...
2016-12-20 Nathan Rossifdt: add memory bank decoding functions for board setup
2016-12-20 Michal SimekARM64: zynqmp: Add one empty line between license and...
2016-12-20 Michal SimekARM64: zynqmp: Add missing SPL dependency for boot...
2016-12-20 Michal Simekcommon: Fix logic in fpga programming
2016-12-20 Michal Simekgpio: zynq: Remove empty line
2016-12-20 Michal Simekblock: Move ceva driver to DM
2016-12-20 Michal Simekdm: Add support for scsi/sata based devices
2016-12-20 Moritz FischerARM: dt: zynq: Add labels to cpu nodes to allow overrid...
2016-12-20 Michal Simeknet: xilinx: Use mdio_register_seq() to support multipl...
2016-12-20 Michal Simekcommon: miiphyutil: Add helper function for mdio bus...
2016-12-19 Tom RiniPrepare v2017.01-rc2
2016-12-19 Simon Glassbinman: Drop microcode features from ifdtool
2016-12-19 Simon Glassx86: Use binman all x86 boards
2016-12-19 Simon Glasssunxi: Use binman for sunxi boards
2016-12-19 Simon Glasstegra: Use a U-Boot-specific .dtsi file
2016-12-19 Simon Glassbinman: Automatically include a U-Boot .dtsi file
2016-12-19 Simon Glassbinman: Allow configuration options to be used in ...
2016-12-19 Simon Glassbinman: Add a build rule for binman
2016-12-19 Simon Glassbinman: Add support for building x86 images with FSP/CMC
2016-12-19 Simon Glassbinman: Add support for building x86 ROMs with SPL
2016-12-19 Simon Glassbinman: Add support for u-boot.img as an input binary
2016-12-19 Simon Glassbinman: Add support for building x86 ROMs
2016-12-19 Simon Glassbinman: Add basic entry types for U-Boot
2016-12-19 Simon Glassbinman: Introduce binman, a tool for building binary...
2016-12-19 Marek Vasuttools: mxsimage: Fix build with OpenSSL 1.1.x
2016-12-19 Marek VasutARM: mxs: Remove unused variable warning
2016-12-19 Marek Vasutserial: 16550: Add Ingenic JZ4780 support
2016-12-19 Marek Vasutserial: 16550: Add port type as driver data
2016-12-19 Marek Vasutserial: 16550: Add getfcr accessor
2016-12-19 Bradley Boleni2c: mv_i2c.c: Correct address endianness
2016-12-18 Tom RiniMerge branch 'master' of git://www.denx.de/git/u-boot-imx
2016-12-16 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-spi
2016-12-16 Tom RiniMerge git://git.denx.de/u-boot-fsl-qoriq
2016-12-16 Jagan Tekiimx6: icorem6_rqs: Add FEC support
2016-12-16 Jagan Tekiarm: dts: imx6qdl-icore-rqs: Add FEC node
2016-12-16 Jagan Tekiimx6: geam6ul: Add FEC support
2016-12-16 Jagan Tekiarm: dts: imx6ul-geam: Add FEC node
2016-12-16 Jagan Tekiimx6: icorem6_rqs: Add I2C support
2016-12-16 Jagan Tekiarm: dts: imx6qdl-icore-rqs: Add I2C node's
2016-12-16 Jagan Tekiimx6: icorem6: Rename engicam icorem6 defconfig files
2016-12-16 Jagan Tekiarm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS...
2016-12-16 Jagan Tekiarm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter...
2016-12-16 Jagan Tekiimx6: geam6ul: Add default mtd nand partition table
2016-12-16 Jagan Tekiimx6: geam6ul: Enable MTD device support
2016-12-16 Jagan Tekiimx6: geam6ul: Add NAND support
2016-12-16 Jagan Tekiimx6: geam6ul: Add I2C support
2016-12-16 Jagan Tekiarm: dts: imx6ul-geam: Add I2C nodes
2016-12-16 Jagan Tekiarm: imx6ul: Add Engicam GEAM6UL Starter Kit initial...
2016-12-16 Jagan Tekiarm: dts: Add devicetree for i.MX6UL
2016-12-16 Jagan Tekiimx6: icorem6: Add I2C support
2016-12-16 Jagan Tekii2c: mxc: Make 'no gpio pinctrl state' print as debug
2016-12-16 Jagan Tekii2c: mxc: Print hex instead of decimal for bus address
2016-12-16 Jagan Tekii2c: Kconfig: Add SYS_I2C_MXC entry
2016-12-16 Jagan Tekiimx6: icorem6: Add custom splashscreen support
2016-12-16 Jagan Tekiimx6: icorem6: Add framebuffer support
2016-12-16 Jagan Tekivideo: Kconfig: Add VIDEO_IPV3 entry
2016-12-16 Jagan Tekiicorem6: Use CONFIG_DM_ETH support
2016-12-16 Jagan TekiARM: dts: imx6qdl-icore: Add FEC support
2016-12-16 Jagan Tekidm: net: fec: Add .read_rom_hwaddr
2016-12-16 Jagan Tekinet: fec_mxc: Driver cleanups
2016-12-16 Jagan Tekinet: fec_mxc: Convert into driver model
2016-12-16 Jagan Tekinet: fec_mxc: Remove unneeded eth_device arg from fec_g...
2016-12-16 Fabio EstevamKconfig: Move USE_ARCH_MEMCPY/MEMSET to Kconfig
2016-12-16 Patrick Bruennarm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
2016-12-16 Peng Fanimx: mx6sllevk: add plugin support
2016-12-16 Peng Fanarm: imx: add i.MX6SLL EVK board support
2016-12-16 Peng Fanarm: dts: add i.MX6SLL device tree
2016-12-16 Peng Fanpinctrl: imx6: support i.MX6SLL
2016-12-16 Peng Fanimx-common: lcdif: update lcdif regs for i.MX6SL/SLL
2016-12-16 Peng FanOCOTP: Update OCOTP driver to support i.MX6SLL
2016-12-16 Peng Fanmx6_common: correct loadaddr and text base for i.MX6SLL
2016-12-16 Peng Fanimx: mx6sll: add Kconfig entry for i.MX6SLL
2016-12-16 Peng Fanimx-common: cache: configure L2 Cache for i.MX6SLL
2016-12-16 Peng Fanimx: mx6sll: add clock support
2016-12-16 Peng Fanimx: clock: gate clk before changing pix clk mux
2016-12-16 Peng Fanimx: mx6sl: add lcdif clock support
2016-12-16 Peng Fanimx: mx6: lcdif: gate clock before changing mux
2016-12-16 Peng Fanimx: mx6: fix mmdc ch0 clk for 6SL
2016-12-16 Peng Fanimx: mx6sll: add iomux settings
2016-12-16 Peng Fanimx-common: timer: add i.MX6SLL support
2016-12-16 Peng Fanimx: mx6sll: update register address
2016-12-16 Peng Fanimx: mx6sll: add pinmux header files
2016-12-16 Peng Fanimx: add i.MX 6SLL CPU type
2016-12-16 Sanchayan Maityconfigs: colibri_vf: Add fdt_fixup environment variable
2016-12-16 Marcin Niestrojboard/liteboard: Add support for liteBoard
2016-12-16 Marcin NiestrojARM: imx6ul: Add support for liteSOM
2016-12-16 Breno Limaudoo_neo: Add Ethernet support
2016-12-16 Breno Limaudoo_neo: Add PFUZE300 PMIC support
2016-12-16 Breno Limapower: pmic: Add Voltage configuration macro
next