]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2014-01-10 Jagannadha... dts: zynq: Add more zynq dts files
2014-01-10 Jagannadha... zynq-common: Enable verified boot(RSA)
2014-01-10 Jagannadha... gpio: zynq: Add dummy gpio routines
2014-01-10 Jagannadha... dts: zynq: Add basic fdt support
2014-01-10 Jagannadha... zynq-common: Define CONFIG_ENV_OVERWRITE
2014-01-10 Jagannadha... zynq-common: Define flash env. partition
2014-01-10 Jagannadha... zynq-common: Change Env. Sector size to 128Kb
2014-01-10 Jagannadha... zynq-common: Define default environment
2014-01-10 Jagannadha... zynq: Add support to find bootmode
2014-01-10 Jagannadha... zynq: Add zynq_zc770 xm012 board support
2014-01-10 Jagannadha... zynq: Add zynq_zc770 xm013 board support
2014-01-10 Jagannadha... zynq: Add zynq_zc770 xm010 board support
2014-01-10 Jagannadha... zynq: Add zynq microzed board support
2014-01-10 Jagannadha... zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
2014-01-10 Jagannadha... zynq-common: Define exact TEXT_BASE
2014-01-10 Jagannadha... zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
2014-01-10 Jagannadha... zynq: Add zynq zed board support
2014-01-10 Jagannadha... zynq: Add zynq zc70x board support
2014-01-10 Jagannadha... doc: zynq: Add information on zynq u-boot
2014-01-10 Jagannadha... zynq-common: Rename zynq with zynq-common
2014-01-10 Jagannadha... zynq: Add GEM0, GEM1 configs support
2014-01-10 Jagannadha... zynq: Add UART0, UART1 configs support
2014-01-10 Jagannadha... zynq: Enable cache options
2014-01-10 Jagannadha... zynq: Minor config cleanup
2014-01-10 Jagannadha... zynq: Cleanup on memory configs
2014-01-10 Jagannadha... zynq: Cleanup on miscellaneous configs
2014-01-10 Jagannadha... zynq: Enable Boot FreeBSD/vxWorks
2014-01-10 Jagannadha... zynq: Enable CONFIG_FIT_VERBOSE
2014-01-10 Albert ARIBAUDarm: make 'MAKEALL -a' distinguish between arm and...
2014-01-10 Tom Riniarmv8: Use __aarch64__ rather than CONFIG_ARM64 in...
2014-01-09 David Fengarm64: MAKEALL, filter armv8 boards from LIST_arm
2014-01-09 David Fengarm64: board support of vexpress_aemv8a
2014-01-09 David Fengarm64: generic board support
2014-01-09 David Fengarm64: core support
2014-01-09 Scott Woodarm64: Make checkarmreloc accept arm64 relocations
2014-01-09 Scott Woodarm64: Turn u-boot.bin back into an ELF file after...
2014-01-09 Scott Woodarm64: Add tool to statically apply RELA relocations
2014-01-09 David Fengadd weak entry definition
2014-01-09 David Fengcmd_pxe: remove compiling warnings
2014-01-09 David Fengfdt_support: 64bit initrd start address support
2014-01-08 Albert ARIBAUDMerge branch 'u-boot-ti/master' into 'u-boot-arm/master'
2014-01-07 Mugunthan V NARM: dra7_evm: read mac address properly from e-fuse
2014-01-07 Nikita Kiryanovarm: omap: cm_t35: enable gpio bank 5 clocks explicitly
2014-01-07 Jeroen HofsteeARM: twister: add missing gpio clock init
2014-01-07 Jeroen HofsteeARM: tam3517-common: fix nand spl boot
2014-01-07 Tom RiniTI:omap3: Drop omap3_zoom2
2014-01-07 Tom Rinicam_enc_4xx: Set CONFIG_SYS_NAND_MAX_OOBFREE / CONFIG_S...
2014-01-06 Holger Brunckarm/km: fix i2c mux define for km_kirkwood_128m16 target
2014-01-06 Karlheinz Jergarm/km: add support for km_kirkwood_128m16 board
2014-01-06 Luka Perkovkirkwood: ib62x0: use device tree and update config
2014-01-06 Albert ARIBAUDMerge branch 'u-boot-samsung/master' into 'u-boot-arm...
2014-01-06 Albert ARIBAUDMerge branch 'u-boot-imx/master' into 'u-boot-arm/master'
2014-01-03 Sergey Alyoshinarm: mx5: Add fuse supply enable in fsl_iim
2014-01-03 Otavio SalvadorARM: mx6: Allow enablement of FEC Anatop based clock...
2014-01-03 Otavio SalvadorARM: mx6: Change the FDT loading address to avoid overl...
2014-01-03 Otavio Salvadormx28evk: Extend environment to easy write of NAND system
2014-01-03 Otavio Salvadormx28evk: Add 'nandboot' environment command
2014-01-03 Otavio Salvadormx28evk: Use 512k for fdt partition to align it
2014-01-03 Otavio Salvadorimx: Easy enabling of SION per-pin using MUX_MODE_SION...
2014-01-02 Fabio Estevammx6: soc: Disable VDDPU regulator
2014-01-02 Fabio Estevammx6: soc: Add the required LDO ramp up delay
2014-01-02 Fabio Estevammx6: soc: Introduce set_ldo_voltage()
2014-01-02 Fabio Estevammx6: soc: Set the VDDSOC at 1.175 V
2014-01-02 Fabio Estevammx6: soc: Clear the LDO ramp values up prior to setting...
2014-01-02 Fabio Estevammx6: soc: Staticize set_vddsoc()
2014-01-02 Fabio Estevammx6sabre_common.h: Add CONFIG_CMD_FUSE support
2014-01-02 Fabio Estevamdoc: README.fuse: Add an example on how to use the...
2013-12-31 Piotr Wilczekboard:trats2: fix default partitions and mmc env
2013-12-31 Piotr Wilczekboard:trats1:trats2: fix adapter number
2013-12-30 Rajeshwari... SPL: EXYNOS: Prepare for variable size SPL support
2013-12-30 Rajeshwari... Config: Add initial config for SMDK5420
2013-12-30 Rajeshwari... DTS: Add dts support for SMDK5420
2013-12-30 Rajeshwari... Exynos5420: Add base patch for SMDK5420
2013-12-30 Rajeshwari... Exynos5420: Add support for 5420 in pinmux and gpio
2013-12-30 Rajeshwari... Exynos5420: Add DDR3 initialization for 5420
2013-12-30 Rajeshwari... Exynos5420: Add clock initialization for 5420
2013-12-30 Rajeshwari... EXYNOS5420: Add dmc and phy_control register structure
2013-12-30 Rajeshwari... EXYNOS5420: Add power register structure.
2013-12-30 Rajeshwari... Exynos5420: Add base addresses for 5420
2013-12-30 Rajeshwari... EXYNOS5: Create a common board file
2013-12-19 Stefano BabicMX6: fix sata compilation for i.MX6
2013-12-19 Lokesh VutlaARM: AM43xx: Add Maintainer
2013-12-19 Lokesh VutlaARM: AM43xx: GP_EVM: Add support for DDR3
2013-12-19 Lokesh VutlaARM: AM43xx: EPOS_EVM: Add support for LPDDR2
2013-12-19 Lokesh VutlaARM: AM33xx+: Update ioregs to pass different values
2013-12-19 Lokesh VutlaARM: AM43xx: clocks: Update DPLL details
2013-12-19 Lokesh VutlaARM: AM43xx: mux: Update mux data
2013-12-19 Lokesh VutlaARM: AM43xx: Update Current Booting devices list
2013-12-19 Lokesh VutlaARM: AM43xx: Select clk source for Timer2
2013-12-19 Sekhar NoriARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG...
2013-12-19 Sekhar NoriARM: AM43XX: board: add support for reading onboard...
2013-12-19 Lokesh VutlaARM: AM43xx: Add extra ENV settings
2013-12-19 Lokesh VutlaARM: AM43xx: Add L2 Support
2013-12-19 Lokesh VutlaARM: AM43xx: Adapt to ti_armv7_common.h config file
2013-12-19 Lokesh VutlaARM: AM43xx: Update the base addresses of modules
2013-12-19 Stefan Roesearm: omap3: Fix beagleboard SPL boot hangup (GPIO clock...
2013-12-18 Albert ARIBAUDMerge remote-tracking branch 'u-boot-pxa/master' into...
2013-12-18 Albert ARIBAUDMerge branch 'u-boot-tegra/master' into 'u-boot-arm...
2013-12-18 Marek VasutARM: pxa: Fix CONFIG_SYS_HZ on PXA
2013-12-18 Alban Bedelarm: tegra: Fix the CPU complex reset masks
next