]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2020-01-08 Peng Maata: fsl_sata: Continue probing other sata port when...
2020-01-08 Peng Maata: sata_sil: Continue probing other sata port when...
2020-01-08 Patrice Chotardtreewide: Remove CONFIG_SYS_UBOOT_START from configs...
2020-01-08 Patrice ChotardMakefile: Fix CONFIG_SYS_UBOOT_START default value
2020-01-08 Tom Rinicmd/Kconfig: Add more dependencies to OSE bootm support
2020-01-07 Heiko Schocherbdinfo: show multi_dtb_fit
2020-01-07 Philippe Reynescmd_ut: add a parameter prefix to the function cmd_ut_c...
2020-01-07 Peng Fanpower: regulator: support off-on-delay-us
2020-01-07 Fabien Dessenneremoteproc: stm32: load resource table from firmware
2020-01-07 Fabien Dessennestm32mp1: remove copro_state environment variable
2020-01-07 Fabien Dessenneremoteproc: stm32: track the coprocessor state in a...
2020-01-07 Fabien Dessennestm32mp1: reset coprocessor status at cold boot
2020-01-07 Fabien Dessennestm32mp1: declare backup registers for coprocessor
2020-01-07 Fabien Dessenneremoteproc: elf_loader: Add elf resource table load...
2020-01-07 Jean-Jacques... spl: fit: Allow the board to tell if more images must...
2020-01-07 Jean-Jacques... dts: Add support for adding DT overlays in u-boot.img
2020-01-07 Jean-Jacques... include: board: provide empty stubs when the BOARD...
2020-01-07 Jean-Jacques... drivers: board: Add get_fit_loadable()
2020-01-07 Jean-Jacques... drivers: board: Make the board drivers available in SPL
2020-01-07 Jean-Jacques... spl: fit: constify the output parameter of spl_fit_get_...
2020-01-07 Jean-Jacques... Makefile.lib: include /__symbols__ in dtb if SPL_LOAD_F...
2020-01-07 Jean-Jacques... spl: fit: be more verbose when an error occurs when...
2020-01-07 Jean-Jacques... spl: fit: Do not fail immediately if an overlay is...
2020-01-07 Jean-Jacques... spl: fit: allocate a temporary buffer to load the overlays
2020-01-07 Jean-Jacques... spl: fit: Make room in the FDT before applying overlays
2020-01-07 Michal Simekspl: fit: Add support for applying DT overlay
2020-01-07 Jean-Jacques... spl: fit: don't load the firmware twice
2020-01-07 Andrew F. Davistools: dumpimage: Fall-though to print usage for help...
2020-01-07 Andrew F. Davistools: fit_image: Use fit_image_get_data_and_size for...
2020-01-07 Andrew F. Davistools: dumpimage: Provide more feedback on internal...
2020-01-07 Tom RiniMerge tag 'u-boot-imx-20200107' of https://gitlab.denx...
2020-01-07 Tom RiniMerge tag 'u-boot-atmel-2020.04-a' of https://gitlab...
2020-01-07 Rasmus VillemoesARM: mxs: spl_boot.c: make early_delay more robust
2020-01-07 Michael TrimarchiARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset...
2020-01-07 Jagan TekiARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core...
2020-01-07 Jagan TekiARM: dts: icorem6: Sync engicam device trees from v5.4
2020-01-07 Michael Trimarchiconfigs: imx6-engicam: Drop fec phy address and mode
2020-01-07 Michael Trimarchiboard: engicam: Fix the ethernet clock initialization
2020-01-07 Michael Trimarchiboard: engicam: Cleanup fdt file and board mapping
2020-01-07 Rasmus Villemoesarm: mxs: be more careful when enabling gpmi_clk
2020-01-07 Rasmus Villemoesarm: mxs: fix comments in arch_cpu_init to match the...
2020-01-07 Rasmus Villemoesarm: mxs: fix register definitions for clkctrl_gpmi...
2020-01-07 Fabio Estevamimx8mm_evk: Adjust the environment for booting a mainli...
2020-01-07 Igor Opaniukmach-imx: nandbcb: improve cmd help
2020-01-07 Fabio Estevammx6slevk: Fix the pmic_get() parameter in the DM case
2020-01-07 Fabio Estevammx6sllevk: Fix the pmic_get() parameter in the DM case
2020-01-07 Fabio Estevammx7dsabresd: Fix the pmic_get() parameter in the DM...
2020-01-07 Frieder Schrempfddr: imx8m: Return error values from LPDDR4 training
2020-01-07 Frieder Schrempftools: imx8m_image: Change source path for DDR firmware...
2020-01-07 Tom Riniarm: imx: Default to SYS_THUMB_BUILD for i.MX6/7
2020-01-07 Igor Opaniukmach-imx: bootaux: elf firmware support
2020-01-07 Igor Opaniukcolibri_imx7: migrate to DM_ETH
2020-01-07 Igor OpaniukARM: dts: imx7: imx7_colibri: introduce fec node
2020-01-07 Igor Opaniukapalis_imx6: migrate to DM_ETH
2020-01-07 Igor OpaniukARM: dts: imx6_apalis: introduce fec node
2020-01-07 Igor Opaniukcolibri_imx6: migrate to DM_ETH
2020-01-07 Igor OpaniukARM: dts: imx6_colibri: introduce fec node
2020-01-07 Igor OpaniukMAINTAINERS: change colibri_imx6/imx6ull/t30/vf maintainers
2020-01-07 Igor OpaniukMAINTAINERS: change apalis_imx6/colibri_imx6 maintainers
2020-01-07 Joris Offougamx7dsabre: Remove warning about DM_SPI_FLASH
2020-01-07 Joris Offougamx7dsabre: Convert to distroboot support
2020-01-07 Joris Offougamx7dsabre: Enable DM_ETH
2020-01-07 Fabio Estevammx7ulp: Add support for Embedded Artists COM board
2020-01-07 Igor Opaniukcolibri_vf: add update_uboot wrapper
2020-01-07 Igor Opaniukcolibri-imx6ull: add update_uboot wrapper
2020-01-07 Igor Opaniukcolibri_imx6: add update_uboot wrapper
2020-01-07 Igor Opaniukapalis_imx6: add update_uboot wrapper
2020-01-07 Igor Opaniukcolibri_imx7: add update_uboot wrapper
2020-01-07 Steffen Dirkwinkelimx: cx9020: use distro boot
2020-01-07 Steffen Dirkwinkelimx: cx9020: enable vidconsole by default
2020-01-07 Steffen Dirkwinkelimx: cx9020: migrate cx9020 to CONFIG_DM_USB
2020-01-07 Steffen Dirkwinkelimx: cx9020: migrate cx9020 to CONFIG_DM_ETH
2020-01-07 Parthiban Nallathambiimx: sync with kernel device tree for Phycore SoM
2020-01-07 Igor Opaniukmach-imx: bootaux: add dcache flushing before enabling M4
2020-01-07 Igor Opaniukmach-imx: bootaux: print stack pointer and reset vector
2020-01-07 Marek Vasutpci: imx: Add iMX6SX compatible
2020-01-07 Suniel Mahesharm: imx6: cm_fx6: Enable DM SPI and SPI_FLASH, fix...
2020-01-07 Suniel Maheshboard: cm_fx6: Enable CONFIG_DM_ETH
2020-01-07 Suniel Maheshboard: cm_fx6: Enable DM support for video, fix build...
2020-01-07 Marek VasutARM: mx6: ddr: Add support for iMX6SX
2020-01-07 Marek VasutARM: mx6: ddr: Configure all SDQS pullups using loop
2020-01-07 Marek VasutARM: mx6: ddr: Factor out SDQS configuration code
2020-01-07 Marek VasutARM: mx6: ddr: Make debug prints work with tiny printf
2020-01-07 Claudius HeineARM: imx6: DHCOM i.MX6 PDK: Enable sysreset driver...
2020-01-07 Claudius HeineARM: dts: dh-imx6: add u-boot specific wdt-reboot node
2020-01-07 Baruch Siachmx6cuboxi: enable OF_CONTROL with DM_MMC and DM_USB
2020-01-07 Baruch Siacharm: dts: hummingboard: add cubox/hummingboard DT ...
2020-01-07 Baruch Siacharm: dts: hummingboard: add cubox/hummingboard DT ...
2020-01-07 Baruch Siachdt-bindings: add imx-audmux macro definitions
2020-01-07 Robert Beckettboard: ge: mx53ppd: use imx wdt
2020-01-07 Robert Beckettboard: ge: bx50v3: use imx wdt
2020-01-07 Ian Rayboard: ge: pass rtc_status via device tree
2020-01-07 Denis Zalevskiyboard: ge: bx50v3: Enable DM for PCI and ethernet
2020-01-07 Denis Zalevskiyconfigs: ppd: DM for USB and regulators PPD
2020-01-07 Ian Rayboard: ge: bx50v3: Fix message output to video console
2020-01-07 Ian Rayboard: ge: bx50v3: Fix run-time warning
2020-01-07 Ian Rayconfigs: bx50v3: Fix boot hang with video
2020-01-07 Robert Beckettboard: ge: ppd: sync device tree from Linux
2020-01-07 Robert Beckettboard: ge: bx50v3: sync devicetrees from Linux
2020-01-07 Lukasz Majewskiimx: Add support for i.MX28 based XEA board
next