]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2015-08-13 Nikita Kiryanovkconfig: add config option for shell prompt
2015-08-13 Masahiro YamadaARM: drop "optional" from target select in favor of...
2015-08-13 Tom Rinidra7xx: Add dra72_evm_defconfig using CONFIG_DM
2015-08-13 Tom Rinidra7xx: Move CONS_INDEX to Kconfig and enable CONFIG_SP...
2015-08-13 Tom RiniARM: SPL: Use CONFIG_SPL_DM not CONFIG_DM
2015-08-13 Tom Rinigpio: omap: Drop 'method' parameter
2015-08-13 Tom Riniam33xx: Update DT files, add am335x_gp_evm_config target
2015-08-13 Nikita Kiryanovarm: am437x: Introduce new board cm-t43
2015-08-13 Nikita Kiryanovgpio: am43xx: expand gpio support
2015-08-13 Nikita Kiryanovmmc: omap_hsmmc: enable 8bit interface for eMMC for...
2015-08-13 Nikita Kiryanovmmc: omap_hsmmc: enable proper CMD(DAT) lines reset...
2015-08-13 Nikita Kiryanovarm: am43xx: enable spi clock
2015-08-13 Nikita Kiryanovspi: omap3_spi: add am43xx support to omap3_spi
2015-08-13 Peter GriffinARM64: hikey: Add a README for this board.
2015-08-13 Peter GriffinARM64: hikey: hi6220: Add u-boot support for the 96boar...
2015-08-13 Peter Griffinmmc: hi6220_dw_mmc: Add hi6220 glue code for dw_mmc...
2015-08-13 Peter Griffinpmic: pmic_hi6553: Add a driver for the hi6553 pmic...
2015-08-13 Peter Griffinhisilicon: hi6220: Add a hi6220 pinmux driver.
2015-08-13 Peter GriffinARM: hi6220: Add register and bitfield definition heade...
2015-08-13 Peter Griffindm: gpio: hi6220: Add a hi6220 GPIO driver model driver.
2015-08-13 Gong Qianyucommon/cmd_source.c: Fix the source command failure...
2015-08-13 Gong Qianyuspl: Fix compile warning for arm64
2015-08-13 Måns Rullgårdimx28: Fix issue with GCC 5.x
2015-08-13 Lokesh VutlaARM: keystone2: Use common definition for clk_get_rate
2015-08-13 Lokesh VutlaARM: keystone2: Remove unsed external clocks
2015-08-13 Lokesh VutlaARM: keystone2: Cleanup init_pll definition
2015-08-13 Lokesh VutlaARM: keystone2: Use common structure for PLLs
2015-08-13 Lokesh VutlaARM: keystone2: Fix dev and arm speed detection
2015-08-13 Lokesh VutlaARM: keystone2: Cleanup PLL init code
2015-08-13 Lokesh VutlaARM: keystone2: Enable CONFIG_DISPLAY_CPUINFO
2015-08-13 Lokesh VutlaARM: keystone2: Cleanup SoC detection
2015-08-13 Nishanth MenonARM: DRA72: disable workaround for 801819
2015-08-13 Nishanth MenonARM: DRA7/ OMAP5: implement Auxiliary Control Register...
2015-08-13 Nishanth MenonARM: Introduce erratum workaround for 801819
2015-08-13 Linus Walleijintegrator: switch to DM serial port
2015-08-13 Wu, Joshusb: ohci: enable cache support
2015-08-13 Wu, JoshARM: cache: implement a default weak flush_cache()...
2015-08-13 Wu, JoshARM: cache: add an empty stub function for invalidate...
2015-08-13 Wu, Joshm68k: cache: add an empty stub functions for invalidate...
2015-08-13 Ruchika GuptaCorrect License and Copyright information on few files
2015-08-13 Stefano Babicti: drop value from CONFIG_SYS_NAND_BUSWIDTH_16BIT
2015-08-13 Stefano Babicmcx: add Ethernet over USB
2015-08-13 Stefano Babicomap3: fix NAND support for mcx board
2015-08-13 Masahiro Yamadadrivers: hierarchize drivers Kconfig menu
2015-08-13 Codrin Ciubotariuinclude/bitfield.h: Assure new bitfield value doesn...
2015-08-13 Alexander Steinarm/rpi: Enable dcache
2015-08-13 Alexander Steindwc2: Add dcache support
2015-08-13 Alexander Steinarm/mach-bcm283x/mbox: Flush and invalidate dcache...
2015-08-13 Alexander SteinARM: bcm283x: Allocate all mailbox buffers cacheline...
2015-08-13 Alexander SteinARM: bcm283x: Define CONFIG_SYS_CACHELINE_SIZE
2015-08-13 Alexander Steinarm1136/arm1176: Merge cache handling code
2015-08-13 Alexander Steinarm1136: Remove dead code
2015-08-13 Paul Kocialkowskisniper: Keypad support, with recovery and fastboot...
2015-08-13 Paul Kocialkowskisniper: Power off when the power on reason is not a...
2015-08-13 Paul Kocialkowskisniper: Power button reset support
2015-08-13 Paul Kocialkowskisniper: Fastboot support
2015-08-13 Paul Kocialkowskisniper: Pass serial number through ATAG
2015-08-13 Paul Kocialkowskisniper: Serial number support, obtained from die ID
2015-08-13 Paul Kocialkowskisniper: OMAP3 reboot mode support
2015-08-13 Paul KocialkowskiLG Optimus Black (P970) codename sniper support
2015-08-13 Paul Kocialkowskiomap3: Reboot mode support
2015-08-13 Paul Kocialkowskiinput: twl4030: Keypad scan and input
2015-08-13 Paul Kocialkowskiinput: TWL4030 input support for power button, USB...
2015-08-13 Paul Kocialkowskipower: twl4030: Power off support
2015-08-13 Vladimir Zapolskiylpc32xx: devkit3250: add spl build support
2015-08-13 Vladimir Zapolskiylpc32xx: devkit3250: update of board configuration
2015-08-13 Vladimir Zapolskiynand: lpc32xx: add SLC NAND controller support
2015-08-13 Vladimir Zapolskiyspl: nand: simple: replace readb() with chip specific...
2015-08-13 Rob Herringimage: fix Android ramdisk support when dtb is specified
2015-08-13 Mark TomlinsonJFFS2: Use merge sort when parsing filesystem
2015-08-13 Mark TomlinsonJFFS2: Use CLEANMARKER to reduce scanning time
2015-08-13 Mark TomlinsonJFFS2: Change scansize to match linux kernel
2015-08-13 Mark TomlinsonJFFS2: Optimize building lists during scan
2015-08-13 Mark TomlinsonJFFS2: Improve speed reading flash files
2015-08-13 Mark TomlinsonJFFS2: Only list each directory entry once
2015-08-13 Mark TomlinsonJFFS2: Speed up and fix comparison functions
2015-08-13 Mark TomlinsonJFFS2: Return early when file read not necessary
2015-08-13 Jiandong Zhengarm: bcmcygnus: Enable Ethernet support
2015-08-13 Heiko Schocherarm, at91: support for sam9260 based smartweb board
2015-08-13 Heiko Schochernand, atmel: remove udelay in spl_nand_erase_one()
2015-08-13 Heiko Schocherspl, common, serial: build SPL without serial support
2015-08-12 Dennis Gilmoreport vexpress to use distro boot commands
2015-08-12 Dennis GilmoreMove setting CONFIG_BOOTP_VCI_STRING to before includin...
2015-08-12 Dennis GilmorePXE: if a board has set its own value for CONFIG_BOOTP_...
2015-08-12 Rob HerringARM: highbank: remove DRAM bank setup
2015-08-12 Simon Glassdm: pmic: max77686: Correct two typos in a comment
2015-08-12 Peng Fanpower: regulator: max77686 correct variable type
2015-08-12 Peng Fanfsl: common: pfuze: no use original pfuze code if DM_PMIC
2015-08-12 Peng Fanpower: regulator: add pfuze100 support
2015-08-12 Peng Fanpower: pmic: pfuze100 support driver model
2015-08-12 Peng Fanpower: regulator: update comments for regulator-name
2015-08-12 Peng Fanpower: regulator use node name when no regulator-name
2015-08-12 Peng Fanpower: pfuze100 correct SWBST macro definition
2015-08-10 Tom RiniMerge git://git.denx.de/u-boot-dm
2015-08-10 Hans de Goededm: serial: Add a REQUIRE_SERIAL_CONSOLE option for...
2015-08-09 Tom RiniMerge branch 'master' of http://git.denx.de/u-boot...
2015-08-08 Hans de Goedesunxi: display: Add composite video out support
2015-08-08 Hans de Goedesunxi: display: Add support for interlaced modes
2015-08-08 Hans de Goedesunxi: display: Add a few extra register and constant...
2015-08-08 Hans de Goedesunxi: display: Correct clk_delay calculations for...
next