]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2022-02-05 Heiko Thieryconfigs/*imxrt10*: remove [SPL_]CLK_COMPOSITE_CCF
2022-02-05 Heiko Thieryclk: imx: select [SPL_]CLK_COMPOSITE_CCF for imxrt10...
2022-02-05 Richard Zhuarm64: dts: imx8mm: Add the pcie support
2022-02-05 Richard Zhuarm64: dts: imx8mm: Add the pcie phy support
2022-02-05 Richard Zhudt-bindings: phy: phy-imx8-pcie: Add binding for the...
2022-02-05 Adam Fordimx: imx8mn_beacon: Remove redundant code
2022-02-05 Adam Fordimx: imx8mm_beacon: Remove redundant code
2022-02-05 Oliver Grauteimx: imx8qm_rm7720: adjust fdt_addr
2022-02-05 Oliver Grauteimx: imx8qm_rom7720: Increase CONFIG_SYS_BOOTM_LEN...
2022-02-05 Adam Fordimx: imx8mn_beacon: Fix USB booting
2022-02-05 Ying-Chun Liu... arm: dts: add imx8mp-rsb3720-a1 dts file
2022-02-05 Marek Vasutarm64: dts: imx8mm: Add missing MX8MM_IOMUXC_NAND_READY...
2022-02-05 Oliver Stäblerarm64: dts: imx8mm/q: Fix pad control of SD1_DATA0
2022-02-05 Marek VasutARM: imx: imx8m: Add PLL 1.4 GHz, 1.5 GHz, 1.6 GHz...
2022-02-05 Marek VasutARM: imx: imx8m: Align PLL 1.2 GHz option with Linux
2022-02-05 Marek Vasutregulator: bd718x7: Bypass bogus warnings
2022-02-05 Andrey Zhizhikinimx8m: lock id_swap_bypass bit in tzc380 enable
2022-02-05 Adam Fordimx: imx8mn_beacon: Enable TrustZone
2022-02-05 Adam Fordimx: imx8mm_beacon: Enable USB
2022-02-05 Adam Fordarm: dts: imx8mm-beacon: Resync dtsi with Kernel 5...
2022-02-05 Fabio Estevamsmegw01: Update DDR initialization
2022-02-05 Andrey Zhizhikinimx8mn-ddr4-evk: generate single bootable image
2022-02-05 Andrey Zhizhikinimx: ventana: correct splashimage load address
2022-02-05 Andrey Zhizhikinimx8mq_evk: configs: add/cleanup variables for distro...
2022-02-05 Patrick Wildtarm64: dts: imx8mq-u-boot.dtsi: improve odd blob-ext...
2022-02-05 Patrick Wildtarm64: dts: imx8mm-u-boot.dtsi: use dash for node names
2022-02-05 Patrick Wildtarm64: dts: imx8mq-u-boot.dtsi: explicitly add spl...
2022-02-05 Patrick Wildtarm64: dts: imx8mq-u-boot.dtsi: alphabetically re-order...
2022-02-05 Fabio Estevamdoc: verdin-imx8mm: Remove ATF_LOAD_ADDR export
2022-02-05 Fabio Estevamdoc: sl-mx8mm: Remove ATF_LOAD_ADDR export
2022-02-05 Fabio Estevamdoc: imx8mm_evk: Remove ATF_LOAD_ADDR export
2022-02-05 Heiko Thieryimx: imx8mm: imx8mm-kontron-n801x-s: add common board...
2022-02-05 Heiko Thieryimx: imx8mm: imx8mm-kontron-n801x-s: convert options...
2022-02-05 Gary Bissoncmd: bcb: fix bcb struct alignment issue
2022-02-05 Ying-Chun Liu... configs: imx8mm-cl-iot-gate: update dfu_alt_info for...
2022-02-05 Michael Trimarchicmd_nandbcb: Support secondary boot address of imx8mn
2022-02-05 Sven Schwermerimx: Enable ACTLR.SMP in SPL for i.MX6/7
2022-02-05 Marek VasutMakefile: imx: Do not call arch/arm/mach-imx flash...
2022-02-05 Marek VasutARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with...
2022-02-05 Marek VasutARM: dts: imx: Add labels to remaining anatop regulators
2022-02-05 Lukasz Majewskiarm: dts: Enable support for USB on XEA (imx28) board
2022-02-05 Lukasz Majewskiarm: xea: config: Provide special defconfig for a singl...
2022-02-05 Lukasz Majewskixea: dts: Update the SPI-NOR flash memory partitions...
2022-02-05 Lukasz Majewskiarm: xea: Modify board code to generate single binary...
2022-02-05 Lukasz Majewskispl: Provide more space to be used for storing SPL...
2022-02-05 Fabio EstevamARM: dts: imx6ull: Use the correct name for ESAI_TX0
2022-02-05 Harald Seilermx6: Use imx6_src_get_boot_mode() to check boot device
2022-02-05 Christoph NiedermaierARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2...
2022-02-05 Mattias Hanssontools/mxsimage: Remove fclose on empty FILE pointer
2022-02-05 Ariel D'Alessandroimx8mn_var_som: Add support for Variscite VAR-SOM-MX8M...
2022-02-05 Oleksandr Suvorovcolibri-imx8x: add on-module gpio expander fxl6408
2022-02-05 Oleksandr SuvorovGPIO: fxl6408: Add support for FXL6408 GPIO expander
2022-02-05 Ying-Chun Liu... imx8mm-cl-iot-gate-optee: add CONFIG_SPL_MMC and CONFIG...
2022-02-05 Haolin Lispi: mxc_spi: remove redundant code in spi_xchg_single()
2022-02-05 Ying-Chun Liu... arm: imx8m: imx8mm-cl-iot-gate: detect extension board
2022-02-05 Ying-Chun Liu... arm: dts: imx8mm-cl-iot-gate: add Compulab's ied overlays
2022-02-05 Ye Liimx8ulp: ddr: Fix DDR frequency request issue
2022-02-05 Jacky Baiimx8ulp:ddr: saving the dram config timing data into...
2022-02-05 Alice Guoimx8ulp: implement to obtain the SoC current temperature
2022-02-05 Ye Liimx8ulp: clock: Handle the DDRLOCKED when setting DDR...
2022-02-05 Alice Guoimx8ulp: clock: Support to enable/disable the ADC1...
2022-02-05 Ye Liimx8ulp: Update ethernet mac to get from fuse
2022-02-05 Ye Liimx8ulp: clock: Support to reset DCNano and MIPI DSI
2022-02-05 Ye Liimx8ulp: clock: Reset DDR controller before clock enable
2022-02-05 Ye Liimx8ulp: Workaround LPOSC_TRIM fuse load issue
2022-02-05 Ye Liimx8ulp: Remove freescale name from CPU revision
2022-02-05 Ye Liimx8ulp: Fix DCNANO QoS setting
2022-02-05 Ye Liimx8ulp: Set DCNANO read QoS on NIC_LPAV to highest
2022-02-05 Ye Liimx8ulp_evk: Control LPI2C0 PCA6416 and TPM0 for display
2022-02-05 Ye Liimx8ulp: rdc: allow A35 access flexspi0 mem
2022-02-05 Ye Liimx8ulp: clock: Add MIPI DSI clock and DCNano clock
2022-02-05 Ye Liimx8ulp: clock: Support LPAV clocks in cgc and pcc
2022-02-05 Peng Fanimx8ulp: assign PXP/HIFI4/EPDC to APD domain
2022-02-05 Ye Liarm: imx8ulp: Allocate LPAV resources to AP domain
2022-02-05 Ye Liimx8ulp: soc: Check the DBD_EN fuse before setting RDC
2022-02-05 Ricardo SalvetiARM: imx8m: support env in fat and ext4
2022-02-05 Pali Rohárimx: nandbcb: Fix printf format in write_fcb
2022-02-05 Lukasz Majewskimxs: power: Change sequence of enabling DCDC switches
2022-02-05 Tim Harveyimx8mm-venice-gw7902: fix M2_RST# gpio pinmux
2022-02-05 Ricardo Salvetimx7ulp_com: add support for SPL
2022-02-05 Oleksandr Suvorovmx7ulp: select soc features
2022-02-05 Heiko Thieryarm: imx: imx8mq: add support to get values for more...
2022-02-05 Francesco Dolcinicolibri-imx7: improve env badblock management
2022-02-04 Tom RiniMerge branch 'master' of https://source.denx.de/u-boot...
2022-02-04 Icenowy Zhengconfigs: sunxi: Add support for Lichee Pi Nano
2022-02-04 Icenowy ZhengARM: dts: suniv: Add device tree files and bindings...
2022-02-04 Icenowy Zhengmach-sunxi: Add support for SUNIV architecture
2022-02-04 Icenowy Zhengconfigs: sunxi: Add common SUNIV header
2022-02-04 Icenowy Zhengsunxi: board: Add support for SUNIV
2022-02-04 Icenowy Zhengsunxi: Add F1C100s DRAM initial support
2022-02-04 Icenowy ZhengARM: sunxi: Add clock and uart to sunxi headers
2022-02-04 Icenowy Zhengarm: arm926ej-s: Add sunxi code
2022-02-04 Jesse Taubemach-sunxi: Move timer code to mach folder
2022-02-04 Icenowy Zhengarm: arm926ej-s: start.S: port save_boot_params support...
2022-02-04 Andre Przywarasunxi-common.h: remove pointless #ifdefs
2022-02-04 Andre Przywaraarmv8: remove no longer needed lowlevel_init.S
2022-02-04 Andre Przywarasunxi: move early "SRAM setup" into separate file
2022-02-04 Andre Przywarasunxi: move Cortex SMPEN setting into start.S
2022-02-04 Andre Przywarasunxi: move non-essential code out of s_init()
2022-02-03 Tom RiniMerge branch '2022-02-03-assorted-fixes'
next