From ff62fb4c6a01866310b0b5f43ea097e9e5220a27 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Mon, 28 Nov 2011 06:37:38 +0000 Subject: [PATCH] omap_gpmc: use SOFTECC in SPL if it's enabled Use software ECC for the SPL build if support for software ECC in SPL is enabled. Signed-off-by: Ilya Yanok Acked-by: Scott Wood --- drivers/mtd/nand/omap_gpmc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index 5bbec48be2..1dfe074e1e 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -348,7 +348,7 @@ int board_nand_init(struct nand_chip *nand) nand->chip_delay = 100; /* Default ECC mode */ -#ifndef CONFIG_SPL_BUILD +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_NAND_SOFTECC) nand->ecc.mode = NAND_ECC_SOFT; #else nand->ecc.mode = NAND_ECC_HW; @@ -359,7 +359,9 @@ int board_nand_init(struct nand_chip *nand) nand->ecc.correct = omap_correct_data; nand->ecc.calculate = omap_calculate_ecc; omap_hwecc_init(nand); +#endif +#ifdef CONFIG_SPL_BUILD if (nand->options & NAND_BUSWIDTH_16) nand->read_buf = nand_read_buf16; else -- 2.39.5