From febabe3ed4f422a39e461ba4c2aff5f0fde6e4d2 Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Mon, 14 Oct 2019 09:28:02 +0200 Subject: [PATCH] dfu: allow to manage DFU on several devices Add support of DFU for several interface/device with one command. The format for "dfu_alt_info" in this case is : - '='alternate list (';' separated) - each interface is separated by '&' The previous behavior is always supported. One example for NOR (bootloaders) + NAND (rootfs in UBI): U-Boot> env set dfu_alt_info \ "sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \ u-boot-env part 0 3&nand 0=UBI partubi 0,3" U-Boot> dfu 0 list DFU alt settings list: dev: SF alt: 0 name: spl layout: RAW_ADDR dev: SF alt: 1 name: ssbl layout: RAW_ADDR dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR dev: NAND alt: 3 name: UBI layout: RAW_ADDR U-Boot> dfu 0 $> dfu-util -l Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ intf=0, alt=3, name="UBI", serial="002700333338511934383330" Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330" Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ intf=0, alt=1, name="u-boot", serial="002700333338511934383330" Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ intf=0, alt=0, name="spl", serial="002700333338511934383330" Signed-off-by: Patrick Delaunay --- cmd/dfu.c | 21 ++++++++++------- doc/README.dfu | 58 ++++++++++++++++++++++++++++++++++++++++++--- drivers/dfu/dfu.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 127 insertions(+), 12 deletions(-) diff --git a/cmd/dfu.c b/cmd/dfu.c index 91a750a4fc..33491d0bc9 100644 --- a/cmd/dfu.c +++ b/cmd/dfu.c @@ -21,23 +21,28 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 4) + if (argc < 2) return CMD_RET_USAGE; #ifdef CONFIG_DFU_OVER_USB char *usb_controller = argv[1]; #endif #if defined(CONFIG_DFU_OVER_USB) || defined(CONFIG_DFU_OVER_TFTP) - char *interface = argv[2]; - char *devstring = argv[3]; + char *interface = NULL; + char *devstring = NULL; + + if (argc >= 4) { + interface = argv[2]; + devstring = argv[3]; + } #endif int ret = 0; #ifdef CONFIG_DFU_OVER_TFTP unsigned long addr = 0; if (!strcmp(argv[1], "tftp")) { - if (argc == 5) - addr = simple_strtoul(argv[4], NULL, 0); + if (argc == 5 || argc == 3) + addr = simple_strtoul(argv[argc - 1], NULL, 0); return update_tftp(addr, interface, devstring); } @@ -48,7 +53,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) goto done; ret = CMD_RET_SUCCESS; - if (argc > 4 && strcmp(argv[4], "list") == 0) { + if (strcmp(argv[argc - 1], "list") == 0) { dfu_show_entities(); goto done; } @@ -67,7 +72,7 @@ U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu, "Device Firmware Upgrade", "" #ifdef CONFIG_DFU_OVER_USB - " [list]\n" + " [ ] [list]\n" " - device firmware upgrade via \n" " on device , attached to interface\n" " \n" @@ -77,7 +82,7 @@ U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu, #ifdef CONFIG_DFU_OVER_USB "dfu " #endif - "tftp []\n" + "tftp [ ] []\n" " - device firmware upgrade via TFTP\n" " on device , attached to interface\n" " \n" diff --git a/doc/README.dfu b/doc/README.dfu index 7a2b5f1d4b..d1ef7e4064 100644 --- a/doc/README.dfu +++ b/doc/README.dfu @@ -42,16 +42,25 @@ Environment variables: separated string of information on each alternate: dfu_alt_info=";;....;" + when only several device are used, the format is: + - '='alternate list (';' separated) + - each interface is separated by '&' + dfu_alt_info=\ + " =;....;&"\ + " =;....;&"\ + ...\ + " =;....;&" + "dfu_bufsiz" : size of the DFU buffer, when absent, use CONFIG_SYS_DFU_DATA_BUF_SIZE (8MiB by default) "dfu_hash_algo" : name of the hash algorithm to use Commands: - dfu list + dfu [ ] list list the alternate device defined in "dfu_alt_info" - dfu + dfu [ ] start the dfu stack on the USB instance with the selected medium backend and use the "dfu_alt_info" variable to configure the alternate setting and link each one with the medium @@ -95,6 +104,18 @@ Commands: with is the MTD partition index + and are absent: + the dfu command to use multiple devices + cmd: dfu 0 list + cmd: dfu 0 + "dfu_alt_info" variable provides the list of with + alternate list separated by '&' with the same format for each + mmc =;....; + nand =;....; + ram =;....; + sf =;....; + + Host tools: When U-Boot runs the dfu stack, the DFU host tools can be used to send/receive firmwares on each configurated alternate. @@ -103,7 +124,7 @@ Host tools: specifications(http://dfu-util.sourceforge.net/) which works with U-Boot. Usage: - Example for firmware located in eMMC or SD card, with: + Example 1: firmware located in eMMC or SD card, with: - alternate 1 (alt=1) for SPL partition (GPT partition 1) - alternate 2 (alt=2) for U-Boot partition (GPT partition 2) @@ -147,3 +168,34 @@ Usage: To request a DFU detach and reset the USB connection: $> dfu-util -a 0 -e -R + + + Example 2: firmware located in NOR (sf) and NAND, with: + - alternate 1 (alt=1) for SPL partition (NOR GPT partition 1) + - alternate 2 (alt=2) for U-Boot partition (NOR GPT partition 2) + - alternate 3 (alt=3) for U-Boot-env partition (NOR GPT partition 3) + - alternate 4 (alt=4) for UBI partition (NAND GPT partition 1) + + U-Boot> env set dfu_alt_info \ + "sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \ + u-boot-env part 0 3&nand 0=UBI partubi 0,1" + + U-Boot> dfu 0 list + + DFU alt settings list: + dev: SF alt: 0 name: spl layout: RAW_ADDR + dev: SF alt: 1 name: ssbl layout: RAW_ADDR + dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR + dev: NAND alt: 3 name: UBI layout: RAW_ADDR + + U-Boot> dfu 0 + + $> dfu-util -l + Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ + intf=0, alt=3, name="UBI", serial="002700333338511934383330" + Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ + intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330" + Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ + intf=0, alt=1, name="u-boot", serial="002700333338511934383330" + Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ + intf=0, alt=0, name="spl", serial="002700333338511934383330" diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index 900a844d15..8bd5216017 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -53,6 +53,54 @@ static int dfu_find_alt_num(const char *s) return ++i; } +/* + * treat dfu_alt_info with several interface information + * to allow DFU on several device with one command, + * the string format is + * interface devstring'='alternate list (';' separated) + * and each interface separated by '&' + */ +int dfu_config_interfaces(char *env) +{ + struct dfu_entity *dfu; + char *s, *i, *d, *a, *part; + int ret = -EINVAL; + int n = 1; + + s = env; + for (; *s; s++) { + if (*s == ';') + n++; + if (*s == '&') + n++; + } + ret = dfu_alt_init(n, &dfu); + if (ret) + return ret; + + s = env; + while (s) { + ret = -EINVAL; + i = strsep(&s, " "); + if (!i) + break; + d = strsep(&s, "="); + if (!d) + break; + a = strsep(&s, "&"); + if (!a) + a = s; + do { + part = strsep(&a, ";"); + ret = dfu_alt_add(dfu, i, d, part); + if (ret) + return ret; + } while (a); + } + + return ret; +} + int dfu_init_env_entities(char *interface, char *devstr) { const char *str_env; @@ -69,7 +117,11 @@ int dfu_init_env_entities(char *interface, char *devstr) } env_bkp = strdup(str_env); - ret = dfu_config_entities(env_bkp, interface, devstr); + if (!interface && !devstr) + ret = dfu_config_interfaces(env_bkp); + else + ret = dfu_config_entities(env_bkp, interface, devstr); + if (ret) { pr_err("DFU entities configuration failed!\n"); pr_err("(partition table does not match dfu_alt_info?)\n"); @@ -83,6 +135,7 @@ done: static unsigned char *dfu_buf; static unsigned long dfu_buf_size; +static enum dfu_device_type dfu_buf_device_type; unsigned char *dfu_free_buf(void) { @@ -100,6 +153,10 @@ unsigned char *dfu_get_buf(struct dfu_entity *dfu) { char *s; + /* manage several entity with several contraint */ + if (dfu_buf && dfu->dev_type != dfu_buf_device_type) + dfu_free_buf(); + if (dfu_buf != NULL) return dfu_buf; @@ -118,6 +175,7 @@ unsigned char *dfu_get_buf(struct dfu_entity *dfu) printf("%s: Could not memalign 0x%lx bytes\n", __func__, dfu_buf_size); + dfu_buf_device_type = dfu->dev_type; return dfu_buf; } -- 2.39.5