From f4385539f1a6b4def6bf74091a2bc11f574d3bd1 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 9 May 2020 22:34:37 +0200 Subject: [PATCH] net: rtl8139: Use dev->iobase instead of custom ioaddr Replace the use of custom static ioaddr variable with common dev->iobase, no functional change. Signed-off-by: Marek Vasut Cc: Joe Hershberger --- drivers/net/rtl8139.c | 84 ++++++++++++++++++++----------------------- 1 file changed, 38 insertions(+), 46 deletions(-) diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c index 4874c1aa4f..f829e52521 100644 --- a/drivers/net/rtl8139.c +++ b/drivers/net/rtl8139.c @@ -192,7 +192,6 @@ #define RTL_STS_RXSTATUSOK BIT(0) static unsigned int cur_rx, cur_tx; -static int ioaddr; /* The RTL8139 can only transmit from a contiguous, aligned memory block. */ static unsigned char tx_buffer[TX_BUF_SIZE] __aligned(4); @@ -223,42 +222,43 @@ static void rtl8139_eeprom_delay(uintptr_t regbase) inl(regbase + RTL_REG_CFG9346); } -static int rtl8139_read_eeprom(unsigned int location, unsigned int addr_len) +static int rtl8139_read_eeprom(struct eth_device *dev, + unsigned int location, unsigned int addr_len) { unsigned int read_cmd = location | (EE_READ_CMD << addr_len); - uintptr_t ee_addr = ioaddr + RTL_REG_CFG9346; + uintptr_t ee_addr = dev->iobase + RTL_REG_CFG9346; unsigned int retval = 0; u8 dataval; int i; outb(EE_ENB & ~EE_CS, ee_addr); outb(EE_ENB, ee_addr); - rtl8139_eeprom_delay(ioaddr); + rtl8139_eeprom_delay(dev->iobase); /* Shift the read command bits out. */ for (i = 4 + addr_len; i >= 0; i--) { dataval = (read_cmd & BIT(i)) ? EE_DATA_WRITE : 0; outb(EE_ENB | dataval, ee_addr); - rtl8139_eeprom_delay(ioaddr); + rtl8139_eeprom_delay(dev->iobase); outb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr); - rtl8139_eeprom_delay(ioaddr); + rtl8139_eeprom_delay(dev->iobase); } outb(EE_ENB, ee_addr); - rtl8139_eeprom_delay(ioaddr); + rtl8139_eeprom_delay(dev->iobase); for (i = 16; i > 0; i--) { outb(EE_ENB | EE_SHIFT_CLK, ee_addr); - rtl8139_eeprom_delay(ioaddr); + rtl8139_eeprom_delay(dev->iobase); retval <<= 1; retval |= inb(ee_addr) & EE_DATA_READ; outb(EE_ENB, ee_addr); - rtl8139_eeprom_delay(ioaddr); + rtl8139_eeprom_delay(dev->iobase); } /* Terminate the EEPROM access. */ outb(~EE_CS, ee_addr); - rtl8139_eeprom_delay(ioaddr); + rtl8139_eeprom_delay(dev->iobase); return retval; } @@ -275,10 +275,10 @@ static void rtl8139_set_rx_mode(struct eth_device *dev) RTL_REG_RXCONFIG_ACCEPTMULTICAST | RTL_REG_RXCONFIG_ACCEPTMYPHYS; - outl(rtl8139_rx_config | rx_mode, ioaddr + RTL_REG_RXCONFIG); + outl(rtl8139_rx_config | rx_mode, dev->iobase + RTL_REG_RXCONFIG); - outl(0xffffffff, ioaddr + RTL_REG_MAR0 + 0); - outl(0xffffffff, ioaddr + RTL_REG_MAR0 + 4); + outl(0xffffffff, dev->iobase + RTL_REG_MAR0 + 0); + outl(0xffffffff, dev->iobase + RTL_REG_MAR0 + 4); } static void rtl8139_hw_reset(struct eth_device *dev) @@ -286,11 +286,11 @@ static void rtl8139_hw_reset(struct eth_device *dev) u8 reg; int i; - outb(RTL_REG_CHIPCMD_CMDRESET, ioaddr + RTL_REG_CHIPCMD); + outb(RTL_REG_CHIPCMD_CMDRESET, dev->iobase + RTL_REG_CHIPCMD); /* Give the chip 10ms to finish the reset. */ for (i = 0; i < 100; i++) { - reg = inb(ioaddr + RTL_REG_CHIPCMD); + reg = inb(dev->iobase + RTL_REG_CHIPCMD); if (!(reg & RTL_REG_CHIPCMD_CMDRESET)) break; @@ -308,15 +308,15 @@ static void rtl8139_reset(struct eth_device *dev) rtl8139_hw_reset(dev); for (i = 0; i < ETH_ALEN; i++) - outb(dev->enetaddr[i], ioaddr + RTL_REG_MAC0 + i); + outb(dev->enetaddr[i], dev->iobase + RTL_REG_MAC0 + i); /* Must enable Tx/Rx before setting transfer thresholds! */ outb(RTL_REG_CHIPCMD_CMDRXENB | RTL_REG_CHIPCMD_CMDTXENB, - ioaddr + RTL_REG_CHIPCMD); + dev->iobase + RTL_REG_CHIPCMD); /* accept no frames yet! */ - outl(rtl8139_rx_config, ioaddr + RTL_REG_RXCONFIG); - outl((TX_DMA_BURST << 8) | 0x03000000, ioaddr + RTL_REG_TXCONFIG); + outl(rtl8139_rx_config, dev->iobase + RTL_REG_RXCONFIG); + outl((TX_DMA_BURST << 8) | 0x03000000, dev->iobase + RTL_REG_TXCONFIG); /* * The Linux driver changes RTL_REG_CONFIG1 here to use a different @@ -331,7 +331,7 @@ static void rtl8139_reset(struct eth_device *dev) debug_cond(DEBUG_RX, "rx ring address is %p\n", rx_ring); flush_cache((unsigned long)rx_ring, RX_BUF_LEN); - outl(phys_to_bus((int)rx_ring), ioaddr + RTL_REG_RXBUF); + outl(phys_to_bus((int)rx_ring), dev->iobase + RTL_REG_RXBUF); /* * If we add multicast support, the RTL_REG_MAR0 register would have @@ -340,17 +340,17 @@ static void rtl8139_reset(struct eth_device *dev) * unicast. */ outb(RTL_REG_CHIPCMD_CMDRXENB | RTL_REG_CHIPCMD_CMDTXENB, - ioaddr + RTL_REG_CHIPCMD); + dev->iobase + RTL_REG_CHIPCMD); - outl(rtl8139_rx_config, ioaddr + RTL_REG_RXCONFIG); + outl(rtl8139_rx_config, dev->iobase + RTL_REG_RXCONFIG); /* Start the chip's Tx and Rx process. */ - outl(0, ioaddr + RTL_REG_RXMISSED); + outl(0, dev->iobase + RTL_REG_RXMISSED); rtl8139_set_rx_mode(dev); /* Disable all known interrupts by setting the interrupt mask. */ - outw(0, ioaddr + RTL_REG_INTRMASK); + outw(0, dev->iobase + RTL_REG_INTRMASK); } static int rtl8139_send(struct eth_device *dev, void *packet, int length) @@ -360,8 +360,6 @@ static int rtl8139_send(struct eth_device *dev, void *packet, int length) unsigned int status; int i = 0; - ioaddr = dev->iobase; - memcpy(tx_buffer, packet, length); debug_cond(DEBUG_TX, "sending %d bytes\n", len); @@ -375,12 +373,12 @@ static int rtl8139_send(struct eth_device *dev, void *packet, int length) flush_cache((unsigned long)tx_buffer, length); outl(phys_to_bus((unsigned long)tx_buffer), - ioaddr + RTL_REG_TXADDR0 + cur_tx * 4); + dev->iobase + RTL_REG_TXADDR0 + cur_tx * 4); outl(((TX_FIFO_THRESH << 11) & 0x003f0000) | len, - ioaddr + RTL_REG_TXSTATUS0 + cur_tx * 4); + dev->iobase + RTL_REG_TXSTATUS0 + cur_tx * 4); do { - status = inw(ioaddr + RTL_REG_INTRSTATUS); + status = inw(dev->iobase + RTL_REG_INTRSTATUS); /* * Only acknlowledge interrupt sources we can properly * handle here - the RTL_REG_INTRSTATUS_RXOVERFLOW/ @@ -389,14 +387,14 @@ static int rtl8139_send(struct eth_device *dev, void *packet, int length) */ status &= RTL_REG_INTRSTATUS_TXOK | RTL_REG_INTRSTATUS_TXERR | RTL_REG_INTRSTATUS_PCIERR; - outw(status, ioaddr + RTL_REG_INTRSTATUS); + outw(status, dev->iobase + RTL_REG_INTRSTATUS); if (status) break; udelay(10); } while (i++ < RTL_TIMEOUT); - txstatus = inl(ioaddr + RTL_REG_TXSTATUS0 + cur_tx * 4); + txstatus = inl(dev->iobase + RTL_REG_TXSTATUS0 + cur_tx * 4); if (!(status & RTL_REG_INTRSTATUS_TXOK)) { debug_cond(DEBUG_TX, @@ -426,14 +424,12 @@ static int rtl8139_recv(struct eth_device *dev) unsigned int status; int length = 0; - ioaddr = dev->iobase; - - if (inb(ioaddr + RTL_REG_CHIPCMD) & RTL_REG_CHIPCMD_RXBUFEMPTY) + if (inb(dev->iobase + RTL_REG_CHIPCMD) & RTL_REG_CHIPCMD_RXBUFEMPTY) return 0; - status = inw(ioaddr + RTL_REG_INTRSTATUS); + status = inw(dev->iobase + RTL_REG_INTRSTATUS); /* See below for the rest of the interrupt acknowledges. */ - outw(status & ~rxstat, ioaddr + RTL_REG_INTRSTATUS); + outw(status & ~rxstat, dev->iobase + RTL_REG_INTRSTATUS); debug_cond(DEBUG_RX, "%s: int %hX ", __func__, status); @@ -474,13 +470,13 @@ static int rtl8139_recv(struct eth_device *dev) flush_cache((unsigned long)rx_ring, RX_BUF_LEN); cur_rx = ROUND(cur_rx + rx_size + 4, 4); - outw(cur_rx - 16, ioaddr + RTL_REG_RXBUFPTR); + outw(cur_rx - 16, dev->iobase + RTL_REG_RXBUFPTR); /* * See RTL8139 Programming Guide V0.1 for the official handling of * Rx overflow situations. The document itself contains basically * no usable information, except for a few exception handling rules. */ - outw(status & rxstat, ioaddr + RTL_REG_INTRSTATUS); + outw(status & rxstat, dev->iobase + RTL_REG_INTRSTATUS); return length; } @@ -491,18 +487,16 @@ static int rtl8139_init(struct eth_device *dev, bd_t *bis) int addr_len, i; u8 reg; - ioaddr = dev->iobase; - /* Bring the chip out of low-power mode. */ - outb(0x00, ioaddr + RTL_REG_CONFIG1); + outb(0x00, dev->iobase + RTL_REG_CONFIG1); - addr_len = rtl8139_read_eeprom(0, 8) == 0x8129 ? 8 : 6; + addr_len = rtl8139_read_eeprom(dev, 0, 8) == 0x8129 ? 8 : 6; for (i = 0; i < 3; i++) - *ap++ = le16_to_cpu(rtl8139_read_eeprom(i + 7, addr_len)); + *ap++ = le16_to_cpu(rtl8139_read_eeprom(dev, i + 7, addr_len)); rtl8139_reset(dev); - reg = inb(ioaddr + RTL_REG_MEDIASTATUS); + reg = inb(dev->iobase + RTL_REG_MEDIASTATUS); if (reg & RTL_REG_MEDIASTATUS_MSRLINKFAIL) { printf("Cable not connected or other link failure\n"); return -1; @@ -513,8 +507,6 @@ static int rtl8139_init(struct eth_device *dev, bd_t *bis) static void rtl8139_stop(struct eth_device *dev) { - ioaddr = dev->iobase; - rtl8139_hw_reset(dev); } -- 2.39.5