From f149ee4c36dd907de496ff1a370adcdea5cb17ce Mon Sep 17 00:00:00 2001 From: Ovidiu Panait Date: Tue, 30 Nov 2021 18:33:56 +0200 Subject: [PATCH] microblaze: start.S: add support for configurable vector base address Current code assumes that the vector base address is always at 0x0. However, this value is configurable for MicroBlaze, so update the __setup_exceptions routine to work with any vector base address. The r4 register is reserved for the vector base address inside __setup_exceptions and the function prologe/epilogue are also updated to save and restore r4. Signed-off-by: Ovidiu Panait Link: https://lore.kernel.org/r/20211130163358.2531677-9-ovidiu.panait@windriver.com Signed-off-by: Michal Simek --- arch/microblaze/cpu/start.S | 58 ++++++++++++++++++++----------------- 1 file changed, 32 insertions(+), 26 deletions(-) diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 68f97f426c..645f7cb038 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -105,15 +105,17 @@ clear_bss: * r10: Stores little/big endian offset for vectors * r2: Stores imm opcode * r3: Stores brai opcode + * r4: Stores the vector base address */ __setup_exceptions: - addik r1, r1, -28 + addik r1, r1, -32 swi r2, r1, 4 swi r3, r1, 8 - swi r6, r1, 12 - swi r7, r1, 16 - swi r8, r1, 20 - swi r10, r1, 24 + swi r4, r1, 12 + swi r6, r1, 16 + swi r7, r1, 20 + swi r8, r1, 24 + swi r10, r1, 28 /* Find-out if u-boot is running on BIG/LITTLE endian platform * There are some steps which is necessary to keep in mind: @@ -132,22 +134,25 @@ __setup_exceptions: addi r2, r0, 0xb0000000 /* hex b000 opcode imm */ addi r3, r0, 0xb8080000 /* hew b808 opcode brai */ + /* Store the vector base address in r4 */ + addi r4, r0, CONFIG_XILINX_MICROBLAZE0_VECTOR_BASE_ADDR + /* reset address */ - swi r2, r0, 0x0 /* reset address - imm opcode */ - swi r3, r0, 0x4 /* reset address - brai opcode */ + swi r2, r4, 0x0 /* reset address - imm opcode */ + swi r3, r4, 0x4 /* reset address - brai opcode */ addik r6, r0, CONFIG_SYS_TEXT_BASE sw r6, r1, r0 lhu r7, r1, r10 rsubi r8, r10, 0x2 - sh r7, r0, r8 + sh r7, r4, r8 rsubi r8, r10, 0x6 - sh r6, r0, r8 + sh r6, r4, r8 #if CONFIG_IS_ENABLED(XILINX_MICROBLAZE0_USR_EXCEP) /* user_vector_exception */ - swi r2, r0, 0x8 /* user vector exception - imm opcode */ - swi r3, r0, 0xC /* user vector exception - brai opcode */ + swi r2, r4, 0x8 /* user vector exception - imm opcode */ + swi r3, r4, 0xC /* user vector exception - brai opcode */ addik r6, r5, _exception_handler sw r6, r1, r0 @@ -173,42 +178,43 @@ __setup_exceptions: */ lhu r7, r1, r10 rsubi r8, r10, 0xa - sh r7, r0, r8 + sh r7, r4, r8 rsubi r8, r10, 0xe - sh r6, r0, r8 + sh r6, r4, r8 #endif /* interrupt_handler */ - swi r2, r0, 0x10 /* interrupt - imm opcode */ - swi r3, r0, 0x14 /* interrupt - brai opcode */ + swi r2, r4, 0x10 /* interrupt - imm opcode */ + swi r3, r4, 0x14 /* interrupt - brai opcode */ addik r6, r5, _interrupt_handler sw r6, r1, r0 lhu r7, r1, r10 rsubi r8, r10, 0x12 - sh r7, r0, r8 + sh r7, r4, r8 rsubi r8, r10, 0x16 - sh r6, r0, r8 + sh r6, r4, r8 /* hardware exception */ - swi r2, r0, 0x20 /* hardware exception - imm opcode */ - swi r3, r0, 0x24 /* hardware exception - brai opcode */ + swi r2, r4, 0x20 /* hardware exception - imm opcode */ + swi r3, r4, 0x24 /* hardware exception - brai opcode */ addik r6, r5, _hw_exception_handler sw r6, r1, r0 lhu r7, r1, r10 rsubi r8, r10, 0x22 - sh r7, r0, r8 + sh r7, r4, r8 rsubi r8, r10, 0x26 - sh r6, r0, r8 + sh r6, r4, r8 - lwi r10, r1, 24 - lwi r8, r1, 20 - lwi r7, r1, 16 - lwi r6, r1, 12 + lwi r10, r1, 28 + lwi r8, r1, 24 + lwi r7, r1, 20 + lwi r6, r1, 16 + lwi r4, r1, 12 lwi r3, r1, 8 lwi r2, r1, 4 - addik r1, r1, 28 + addik r1, r1, 32 rtsd r15, 8 or r0, r0, r0 -- 2.39.5