From edbf8b4f8c7ef61d3dea5f629e0d756990b8277d Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 1 Oct 2014 19:57:24 -0600 Subject: [PATCH] imx: Add error checking to setup_i2c() Since this function can fail, check its return value. Signed-off-by: Simon Glass Tested-by: Nikita Kiryanov --- arch/arm/imx-common/i2c-mxv7.c | 24 +++++++++++--- arch/arm/include/asm/imx-common/mxc_i2c.h | 4 +-- board/compulab/cm_fx6/cm_fx6.c | 40 +++++++++++++++++++---- 3 files changed, 55 insertions(+), 13 deletions(-) diff --git a/arch/arm/imx-common/i2c-mxv7.c b/arch/arm/imx-common/i2c-mxv7.c index a58087399c..70cff5cc8d 100644 --- a/arch/arm/imx-common/i2c-mxv7.c +++ b/arch/arm/imx-common/i2c-mxv7.c @@ -69,15 +69,29 @@ static void * const i2c_bases[] = { }; /* i2c_index can be from 0 - 2 */ -void setup_i2c(unsigned i2c_index, int speed, int slave_addr, - struct i2c_pads_info *p) +int setup_i2c(unsigned i2c_index, int speed, int slave_addr, + struct i2c_pads_info *p) { + int ret; + if (i2c_index >= ARRAY_SIZE(i2c_bases)) - return; + return -EINVAL; /* Enable i2c clock */ - enable_i2c_clk(1, i2c_index); + ret = enable_i2c_clk(1, i2c_index); + if (ret) + goto err_clk; + /* Make sure bus is idle */ - force_idle_bus(p); + ret = force_idle_bus(p); + if (ret) + goto err_idle; + bus_i2c_init(i2c_bases[i2c_index], speed, slave_addr, force_idle_bus, p); + + return 0; + +err_idle: +err_clk: + return ret; } diff --git a/arch/arm/include/asm/imx-common/mxc_i2c.h b/arch/arm/include/asm/imx-common/mxc_i2c.h index 182c2f397f..af86163535 100644 --- a/arch/arm/include/asm/imx-common/mxc_i2c.h +++ b/arch/arm/include/asm/imx-common/mxc_i2c.h @@ -52,8 +52,8 @@ struct i2c_pads_info { &mx6q_##name : &mx6s_##name #endif -void setup_i2c(unsigned i2c_index, int speed, int slave_addr, - struct i2c_pads_info *p); +int setup_i2c(unsigned i2c_index, int speed, int slave_addr, + struct i2c_pads_info *p); void bus_i2c_init(void *base, int speed, int slave_addr, int (*idle_bus_fn)(void *p), void *p); int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf, diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index fdb8ebf9e7..9c6e686d30 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -141,14 +141,36 @@ I2C_PADS(i2c2_pads, IMX_GPIO_NR(1, 6)); -static void cm_fx6_setup_i2c(void) +static int cm_fx6_setup_one_i2c(int busnum, struct i2c_pads_info *pads) { - setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, I2C_PADS_INFO(i2c0_pads)); - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, I2C_PADS_INFO(i2c1_pads)); - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, I2C_PADS_INFO(i2c2_pads)); + int ret; + + ret = setup_i2c(busnum, CONFIG_SYS_I2C_SPEED, 0x7f, pads); + if (ret) + printf("Warning: I2C%d setup failed: %d\n", busnum, ret); + + return ret; +} + +static int cm_fx6_setup_i2c(void) +{ + int ret = 0, err; + + /* i2c_pads are wierd macro variables; we can't use an array */ + err = cm_fx6_setup_one_i2c(0, I2C_PADS_INFO(i2c0_pads)); + if (err) + ret = err; + err = cm_fx6_setup_one_i2c(1, I2C_PADS_INFO(i2c1_pads)); + if (err) + ret = err; + err = cm_fx6_setup_one_i2c(2, I2C_PADS_INFO(i2c2_pads)); + if (err) + ret = err; + + return ret; } #else -static void cm_fx6_setup_i2c(void) { } +static int cm_fx6_setup_i2c(void) { return 0; } #endif #ifdef CONFIG_USB_EHCI_MX6 @@ -409,9 +431,15 @@ void ft_board_setup(void *blob, bd_t *bd) int board_init(void) { + int ret; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; cm_fx6_setup_gpmi_nand(); - cm_fx6_setup_i2c(); + + /* Warn on failure but do not abort boot */ + ret = cm_fx6_setup_i2c(); + if (ret) + printf("Warning: I2C setup failed: %d\n", ret); return 0; } -- 2.39.5