From e8e2703a3050feb8d2e6473d806c5277d5e3236f Mon Sep 17 00:00:00 2001 From: Peter Bergin Date: Sun, 14 Feb 2021 20:19:22 +0100 Subject: [PATCH] doc: board: freescale: imx8mp_evk: update to newer versions and change ATF_LOAD_ADDR Update imx-atf and firmware-imx to latest released versions. Update address of ATF_LOAD_ADDR that has changed to 0x970000 in imx-atf commit 48733cb4e773a7584ced601de9d717efa3d73815. Add 'O=' to make and build in separate directory as one issue has been noticed where it was trouble building directly inside u-boot source dir. Restructure the workflow and copy binaries after defconfig to ensure that build directory is created. Signed-off-by: Peter Bergin Cc: Andrey Zhizhikin Reviewed-by: Andrey Zhizhikin --- doc/board/freescale/imx8mp_evk.rst | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/doc/board/freescale/imx8mp_evk.rst b/doc/board/freescale/imx8mp_evk.rst index ccffcf7257..796a7611d0 100644 --- a/doc/board/freescale/imx8mp_evk.rst +++ b/doc/board/freescale/imx8mp_evk.rst @@ -16,27 +16,21 @@ Quick Start Get and Build the ARM Trusted firmware -------------------------------------- -Note: $(srctree) is the U-Boot source directory Get ATF from: https://source.codeaurora.org/external/imx/imx-atf -branch: imx_5.4.47_2.2.0 +branch: imx_5.4.70_2.3.0 .. code-block:: bash $ make PLAT=imx8mp bl31 - $ cp build/imx8mp/release/bl31.bin $(srctree) Get the ddr firmware -------------------- .. code-block:: bash - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin - $ chmod +x firmware-imx-8.9.bin - $ ./firmware-imx-8.9.bin - $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin - $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_201904.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin - $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin - $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_201904.bin $(srctree)/lpddr4_pmu_train_2d_imem.bin + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.bin + $ chmod +x firmware-imx-8.10.bin + $ ./firmware-imx-8.10.bin Build U-Boot ------------ @@ -44,15 +38,20 @@ Build U-Boot .. code-block:: bash $ export CROSS_COMPILE=aarch64-poky-linux- - $ make imx8mp_evk_defconfig - $ export ATF_LOAD_ADDR=0x960000 - $ make flash.bin + $ make O=build imx8mp_evk_defconfig + $ cp ../imx-atf/build/imx8mp/release/bl31.bin ./build/bl31.bin + $ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_202006.bin ./build/lpddr4_pmu_train_1d_dmem.bin + $ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_202006.bin ./build/lpddr4_pmu_train_1d_imem.bin + $ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_202006.bin ./build/lpddr4_pmu_train_2d_dmem.bin + $ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_202006.bin ./build/lpddr4_pmu_train_2d_imem.bin + $ export ATF_LOAD_ADDR=0x970000 + $ make O=build flash.bin Burn the flash.bin to the MicroSD card at offset 32KB: .. code-block:: bash - $sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=32 conv=notrunc; sync + $sudo dd if=build/flash.bin of=/dev/sd[x] bs=1K seek=32 conv=notrunc; sync Boot ---- -- 2.39.5