From e3568d2ecadda3e6c24ffab1670b77763df7419f Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Thu, 20 Nov 2014 21:14:13 +0800 Subject: [PATCH] DM: thermal: Add imx thermal DM driver Add a new thermal uclass for thermal sensor and implement the imx thermal driver basing on this uclass. Signed-off-by: Ye.Li Acked-by: Stefano Babic --- drivers/Makefile | 1 + drivers/thermal/Makefile | 9 ++ drivers/thermal/imx_thermal.c | 177 +++++++++++++++++++++++++++++++ drivers/thermal/thermal-uclass.c | 30 ++++++ include/dm/uclass-id.h | 1 + include/imx_thermal.h | 17 +++ include/thermal.h | 42 ++++++++ 7 files changed, 277 insertions(+) create mode 100644 drivers/thermal/Makefile create mode 100644 drivers/thermal/imx_thermal.c create mode 100644 drivers/thermal/thermal-uclass.c create mode 100644 include/imx_thermal.h create mode 100644 include/thermal.h diff --git a/drivers/Makefile b/drivers/Makefile index 33227c8bd6..7683c6139f 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -21,3 +21,4 @@ obj-y += pwm/ obj-y += input/ # SOC specific infrastructure drivers. obj-y += soc/ +obj-y += thermal/ diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile new file mode 100644 index 0000000000..6d4cacdcf7 --- /dev/null +++ b/drivers/thermal/Makefile @@ -0,0 +1,9 @@ +# +# (C) Copyright 2014 Freescale Semiconductor, Inc. +# Author: Nitin Garg +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_DM_THERMAL) += thermal-uclass.o +obj-$(CONFIG_IMX6_THERMAL) += imx_thermal.o diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c new file mode 100644 index 0000000000..116158511d --- /dev/null +++ b/drivers/thermal/imx_thermal.c @@ -0,0 +1,177 @@ +/* + * (C) Copyright 2014 Freescale Semiconductor, Inc. + * Author: Nitin Garg + * Ye Li + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TEMPERATURE_MIN -40 +#define TEMPERATURE_HOT 80 +#define TEMPERATURE_MAX 125 +#define FACTOR0 10000000 +#define FACTOR1 15976 +#define FACTOR2 4297157 +#define MEASURE_FREQ 327 + +#define TEMPSENSE0_TEMP_CNT_SHIFT 8 +#define TEMPSENSE0_TEMP_CNT_MASK (0xfff << TEMPSENSE0_TEMP_CNT_SHIFT) +#define TEMPSENSE0_FINISHED (1 << 2) +#define TEMPSENSE0_MEASURE_TEMP (1 << 1) +#define TEMPSENSE0_POWER_DOWN (1 << 0) +#define MISC0_REFTOP_SELBIASOFF (1 << 3) +#define TEMPSENSE1_MEASURE_FREQ 0xffff + +static int read_cpu_temperature(struct udevice *dev) +{ + int temperature; + unsigned int reg, n_meas; + const struct imx_thermal_plat *pdata = dev_get_platdata(dev); + struct anatop_regs *anatop = (struct anatop_regs *)pdata->regs; + unsigned int *priv = dev_get_priv(dev); + u32 fuse = *priv; + int t1, n1; + u32 c1, c2; + u64 temp64; + + /* + * Sensor data layout: + * [31:20] - sensor value @ 25C + * We use universal formula now and only need sensor value @ 25C + * slope = 0.4297157 - (0.0015976 * 25C fuse) + */ + n1 = fuse >> 20; + t1 = 25; /* t1 always 25C */ + + /* + * Derived from linear interpolation: + * slope = 0.4297157 - (0.0015976 * 25C fuse) + * slope = (FACTOR2 - FACTOR1 * n1) / FACTOR0 + * (Nmeas - n1) / (Tmeas - t1) = slope + * We want to reduce this down to the minimum computation necessary + * for each temperature read. Also, we want Tmeas in millicelsius + * and we don't want to lose precision from integer division. So... + * Tmeas = (Nmeas - n1) / slope + t1 + * milli_Tmeas = 1000 * (Nmeas - n1) / slope + 1000 * t1 + * milli_Tmeas = -1000 * (n1 - Nmeas) / slope + 1000 * t1 + * Let constant c1 = (-1000 / slope) + * milli_Tmeas = (n1 - Nmeas) * c1 + 1000 * t1 + * Let constant c2 = n1 *c1 + 1000 * t1 + * milli_Tmeas = c2 - Nmeas * c1 + */ + temp64 = FACTOR0; + temp64 *= 1000; + do_div(temp64, FACTOR1 * n1 - FACTOR2); + c1 = temp64; + c2 = n1 * c1 + 1000 * t1; + + /* + * now we only use single measure, every time we read + * the temperature, we will power on/down anadig thermal + * module + */ + writel(TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_clr); + writel(MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set); + + /* setup measure freq */ + reg = readl(&anatop->tempsense1); + reg &= ~TEMPSENSE1_MEASURE_FREQ; + reg |= MEASURE_FREQ; + writel(reg, &anatop->tempsense1); + + /* start the measurement process */ + writel(TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_clr); + writel(TEMPSENSE0_FINISHED, &anatop->tempsense0_clr); + writel(TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_set); + + /* make sure that the latest temp is valid */ + while ((readl(&anatop->tempsense0) & + TEMPSENSE0_FINISHED) == 0) + udelay(10000); + + /* read temperature count */ + reg = readl(&anatop->tempsense0); + n_meas = (reg & TEMPSENSE0_TEMP_CNT_MASK) + >> TEMPSENSE0_TEMP_CNT_SHIFT; + writel(TEMPSENSE0_FINISHED, &anatop->tempsense0_clr); + + /* milli_Tmeas = c2 - Nmeas * c1 */ + temperature = (c2 - n_meas * c1)/1000; + + /* power down anatop thermal sensor */ + writel(TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_set); + writel(MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_clr); + + return temperature; +} + +int imx_thermal_get_temp(struct udevice *dev, int *temp) +{ + int cpu_tmp = 0; + + cpu_tmp = read_cpu_temperature(dev); + while (cpu_tmp > TEMPERATURE_MIN && cpu_tmp < TEMPERATURE_MAX) { + if (cpu_tmp >= TEMPERATURE_HOT) { + printf("CPU Temperature is %d C, too hot to boot, waiting...\n", + cpu_tmp); + udelay(5000000); + cpu_tmp = read_cpu_temperature(dev); + } else { + break; + } + } + + *temp = cpu_tmp; + + return 0; +} + +static const struct dm_thermal_ops imx_thermal_ops = { + .get_temp = imx_thermal_get_temp, +}; + +static int imx_thermal_probe(struct udevice *dev) +{ + unsigned int fuse = ~0; + + const struct imx_thermal_plat *pdata = dev_get_platdata(dev); + unsigned int *priv = dev_get_priv(dev); + + /* Read Temperature calibration data fuse */ + fuse_read(pdata->fuse_bank, pdata->fuse_word, &fuse); + + /* Check for valid fuse */ + if (fuse == 0 || fuse == ~0) { + printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse); + return -EPERM; + } else { + printf("CPU: Thermal calibration data: 0x%x\n", fuse); + } + + *priv = fuse; + + enable_thermal_clk(); + + return 0; +} + +U_BOOT_DRIVER(imx_thermal) = { + .name = "imx_thermal", + .id = UCLASS_THERMAL, + .ops = &imx_thermal_ops, + .probe = imx_thermal_probe, + .priv_auto_alloc_size = sizeof(unsigned int), + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/thermal/thermal-uclass.c b/drivers/thermal/thermal-uclass.c new file mode 100644 index 0000000000..3bee1a7dc7 --- /dev/null +++ b/drivers/thermal/thermal-uclass.c @@ -0,0 +1,30 @@ +/* + * (C) Copyright 2014 Freescale Semiconductor, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +int thermal_get_temp(struct udevice *dev, int *temp) +{ + const struct dm_thermal_ops *ops = device_get_ops(dev); + + if (!ops->get_temp) + return -ENOSYS; + + return ops->get_temp(dev, temp); +} + +UCLASS_DRIVER(thermal) = { + .id = UCLASS_THERMAL, + .name = "thermal", +}; diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index a8944c97d0..202f59b505 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -28,6 +28,7 @@ enum uclass_id { UCLASS_SPI_GENERIC, /* Generic SPI flash target */ UCLASS_SPI_FLASH, /* SPI flash */ UCLASS_CROS_EC, /* Chrome OS EC */ + UCLASS_THERMAL, /* Thermal sensor */ UCLASS_COUNT, UCLASS_INVALID = -1, diff --git a/include/imx_thermal.h b/include/imx_thermal.h new file mode 100644 index 0000000000..be1365288e --- /dev/null +++ b/include/imx_thermal.h @@ -0,0 +1,17 @@ +/* + * + * (C) Copyright 2014 Freescale Semiconductor, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _IMX_THERMAL_H_ +#define _IMX_THERMAL_H_ + +struct imx_thermal_plat { + void *regs; + int fuse_bank; + int fuse_word; +}; + +#endif /* _IMX_THERMAL_H_ */ diff --git a/include/thermal.h b/include/thermal.h new file mode 100644 index 0000000000..5d6101bec6 --- /dev/null +++ b/include/thermal.h @@ -0,0 +1,42 @@ +/* + * + * (C) Copyright 2014 Freescale Semiconductor, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _THERMAL_H_ +#define _THERMAL_H_ + +#include + +int thermal_get_temp(struct udevice *dev, int *temp); + +/** + * struct struct dm_thermal_ops - Driver model Thermal operations + * + * The uclass interface is implemented by all Thermal devices which use + * driver model. + */ +struct dm_thermal_ops { + /** + * Get the current temperature + * + * The device provided is the slave device. It's parent controller + * will be used to provide the communication. + * + * This must be called before doing any transfers with a Thermal slave. + * It will enable and initialize any Thermal hardware as necessary, + * and make sure that the SCK line is in the correct idle state. It is + * not allowed to claim the same bus for several slaves without + * releasing the bus in between. + * + * @dev: The Thermal device + * + * Returns: 0 if the bus was claimed successfully, or a negative value + * if it wasn't. + */ + int (*get_temp)(struct udevice *dev, int *temp); +}; + +#endif /* _THERMAL_H_ */ -- 2.39.5