From dfadb946f65b97c4607ccb8be64fca16672e9ea2 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 25 Mar 2021 15:49:18 +0100 Subject: [PATCH] pci: add common Designware PCIe functions With the introduction of pcie_dw_rockchip, and need to support the DW PCIe in the Amlogic AXG & G12 SoCs, most of the DW PCIe helpers would be duplicated. This introduce a "common" DW PCIe helpers file with common code merged from the dw_ti and dw_rockchip drivers and adapted to fit with the upcoming dw_meson. The following changes will switch the dw_ti and dw_rockchip to use these helpers. Signed-off-by: Neil Armstrong Tested-by: Green Wan [bmeng: remove the blank line at EOF of drivers/pci/pcie_dw_common.c] Signed-off-by: Bin Meng --- drivers/pci/Kconfig | 4 + drivers/pci/Makefile | 1 + drivers/pci/pcie_dw_common.c | 365 +++++++++++++++++++++++++++++++++++ drivers/pci/pcie_dw_common.h | 155 +++++++++++++++ 4 files changed, 525 insertions(+) create mode 100644 drivers/pci/pcie_dw_common.c create mode 100644 drivers/pci/pcie_dw_common.h diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index ba41787f64..ab5a5e7ed6 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -258,6 +258,10 @@ config PCI_MVEBU Say Y here if you want to enable PCIe controller support on Armada XP/38x SoCs. +config PCIE_DW_COMMON + bool + select DM_PCI + config PCI_KEYSTONE bool "TI Keystone PCIe controller" depends on DM_PCI diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 5ed94bc95c..e3ca8b27e4 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_PCIE_LAYERSCAPE_GEN4) += pcie_layerscape_gen4.o \ obj-$(CONFIG_PCI_XILINX) += pcie_xilinx.o obj-$(CONFIG_PCI_PHYTIUM) += pcie_phytium.o obj-$(CONFIG_PCIE_INTEL_FPGA) += pcie_intel_fpga.o +obj-$(CONFIG_PCIE_DW_COMMON) += pcie_dw_common.o obj-$(CONFIG_PCI_KEYSTONE) += pcie_dw_ti.o obj-$(CONFIG_PCIE_MEDIATEK) += pcie_mediatek.o obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o diff --git a/drivers/pci/pcie_dw_common.c b/drivers/pci/pcie_dw_common.c new file mode 100644 index 0000000000..785fd3aad0 --- /dev/null +++ b/drivers/pci/pcie_dw_common.c @@ -0,0 +1,365 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2021 BayLibre, SAS + * Author: Neil Armstrong + * + * Copyright (c) 2021 Rockchip, Inc. + * + * Copyright (C) 2018 Texas Instruments, Inc + */ + +#include +#include +#include +#include +#include +#include +#include +#include "pcie_dw_common.h" + +int pcie_dw_get_link_speed(struct pcie_dw *pci) +{ + return (readl(pci->dbi_base + PCIE_LINK_STATUS_REG) & + PCIE_LINK_STATUS_SPEED_MASK) >> PCIE_LINK_STATUS_SPEED_OFF; +} + +int pcie_dw_get_link_width(struct pcie_dw *pci) +{ + return (readl(pci->dbi_base + PCIE_LINK_STATUS_REG) & + PCIE_LINK_STATUS_WIDTH_MASK) >> PCIE_LINK_STATUS_WIDTH_OFF; +} + +static void dw_pcie_writel_ob_unroll(struct pcie_dw *pci, u32 index, u32 reg, + u32 val) +{ + u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index); + void __iomem *base = pci->atu_base; + + writel(val, base + offset + reg); +} + +static u32 dw_pcie_readl_ob_unroll(struct pcie_dw *pci, u32 index, u32 reg) +{ + u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index); + void __iomem *base = pci->atu_base; + + return readl(base + offset + reg); +} + +/** + * pcie_dw_prog_outbound_atu_unroll() - Configure ATU for outbound accesses + * + * @pcie: Pointer to the PCI controller state + * @index: ATU region index + * @type: ATU accsess type + * @cpu_addr: the physical address for the translation entry + * @pci_addr: the pcie bus address for the translation entry + * @size: the size of the translation entry + * + * Return: 0 is successful and -1 is failure + */ +int pcie_dw_prog_outbound_atu_unroll(struct pcie_dw *pci, int index, + int type, u64 cpu_addr, + u64 pci_addr, u32 size) +{ + u32 retries, val; + + dev_dbg(pci->dev, "ATU programmed with: index: %d, type: %d, cpu addr: %8llx, pci addr: %8llx, size: %8x\n", + index, type, cpu_addr, pci_addr, size); + + dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE, + lower_32_bits(cpu_addr)); + dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE, + upper_32_bits(cpu_addr)); + dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT, + lower_32_bits(cpu_addr + size - 1)); + dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET, + lower_32_bits(pci_addr)); + dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET, + upper_32_bits(pci_addr)); + dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, + type); + dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2, + PCIE_ATU_ENABLE); + + /* + * Make sure ATU enable takes effect before any subsequent config + * and I/O accesses. + */ + for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) { + val = dw_pcie_readl_ob_unroll(pci, index, + PCIE_ATU_UNR_REGION_CTRL2); + if (val & PCIE_ATU_ENABLE) + return 0; + + udelay(LINK_WAIT_IATU); + } + dev_err(pci->dev, "outbound iATU is not being enabled\n"); + + return -1; +} + +/** + * set_cfg_address() - Configure the PCIe controller config space access + * + * @pcie: Pointer to the PCI controller state + * @d: PCI device to access + * @where: Offset in the configuration space + * + * Configures the PCIe controller to access the configuration space of + * a specific PCIe device and returns the address to use for this + * access. + * + * Return: Address that can be used to access the configation space + * of the requested device / offset + */ +static uintptr_t set_cfg_address(struct pcie_dw *pcie, + pci_dev_t d, uint where) +{ + int bus = PCI_BUS(d) - pcie->first_busno; + uintptr_t va_address; + u32 atu_type; + int ret; + + /* Use dbi_base for own configuration read and write */ + if (!bus) { + va_address = (uintptr_t)pcie->dbi_base; + goto out; + } + + if (bus == 1) + /* + * For local bus whose primary bus number is root bridge, + * change TLP Type field to 4. + */ + atu_type = PCIE_ATU_TYPE_CFG0; + else + /* Otherwise, change TLP Type field to 5. */ + atu_type = PCIE_ATU_TYPE_CFG1; + + /* + * Not accessing root port configuration space? + * Region #0 is used for Outbound CFG space access. + * Direction = Outbound + * Region Index = 0 + */ + d = PCI_MASK_BUS(d); + d = PCI_ADD_BUS(bus, d); + ret = pcie_dw_prog_outbound_atu_unroll(pcie, PCIE_ATU_REGION_INDEX1, + atu_type, (u64)pcie->cfg_base, + d << 8, pcie->cfg_size); + if (ret) + return (uintptr_t)ret; + + va_address = (uintptr_t)pcie->cfg_base; + +out: + va_address += where & ~0x3; + + return va_address; +} + +/** + * pcie_dw_addr_valid() - Check for valid bus address + * + * @d: The PCI device to access + * @first_busno: Bus number of the PCIe controller root complex + * + * Return 1 (true) if the PCI device can be accessed by this controller. + * + * Return: 1 on valid, 0 on invalid + */ +static int pcie_dw_addr_valid(pci_dev_t d, int first_busno) +{ + if ((PCI_BUS(d) == first_busno) && (PCI_DEV(d) > 0)) + return 0; + if ((PCI_BUS(d) == first_busno + 1) && (PCI_DEV(d) > 0)) + return 0; + + return 1; +} + +/** + * pcie_dw_read_config() - Read from configuration space + * + * @bus: Pointer to the PCI bus + * @bdf: Identifies the PCIe device to access + * @offset: The offset into the device's configuration space + * @valuep: A pointer at which to store the read value + * @size: Indicates the size of access to perform + * + * Read a value of size @size from offset @offset within the configuration + * space of the device identified by the bus, device & function numbers in @bdf + * on the PCI bus @bus. + * + * Return: 0 on success + */ +int pcie_dw_read_config(const struct udevice *bus, pci_dev_t bdf, + uint offset, ulong *valuep, + enum pci_size_t size) +{ + struct pcie_dw *pcie = dev_get_priv(bus); + uintptr_t va_address; + ulong value; + + dev_dbg(pcie->dev, "PCIE CFG read: bdf=%2x:%2x:%2x ", + PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf)); + + if (!pcie_dw_addr_valid(bdf, pcie->first_busno)) { + debug("- out of range\n"); + *valuep = pci_get_ff(size); + return 0; + } + + va_address = set_cfg_address(pcie, bdf, offset); + + value = readl(va_address); + + debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value); + *valuep = pci_conv_32_to_size(value, offset, size); + + return pcie_dw_prog_outbound_atu_unroll(pcie, PCIE_ATU_REGION_INDEX1, + PCIE_ATU_TYPE_IO, pcie->io.phys_start, + pcie->io.bus_start, pcie->io.size); +} + +/** + * pcie_dw_write_config() - Write to configuration space + * + * @bus: Pointer to the PCI bus + * @bdf: Identifies the PCIe device to access + * @offset: The offset into the device's configuration space + * @value: The value to write + * @size: Indicates the size of access to perform + * + * Write the value @value of size @size from offset @offset within the + * configuration space of the device identified by the bus, device & function + * numbers in @bdf on the PCI bus @bus. + * + * Return: 0 on success + */ +int pcie_dw_write_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong value, + enum pci_size_t size) +{ + struct pcie_dw *pcie = dev_get_priv(bus); + uintptr_t va_address; + ulong old; + + dev_dbg(pcie->dev, "PCIE CFG write: (b,d,f)=(%2d,%2d,%2d) ", + PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf)); + dev_dbg(pcie->dev, "(addr,val)=(0x%04x, 0x%08lx)\n", offset, value); + + if (!pcie_dw_addr_valid(bdf, pcie->first_busno)) { + debug("- out of range\n"); + return 0; + } + + va_address = set_cfg_address(pcie, bdf, offset); + + old = readl(va_address); + value = pci_conv_size_to_32(old, value, offset, size); + writel(value, va_address); + + return pcie_dw_prog_outbound_atu_unroll(pcie, PCIE_ATU_REGION_INDEX1, + PCIE_ATU_TYPE_IO, pcie->io.phys_start, + pcie->io.bus_start, pcie->io.size); +} + +/** + * pcie_dw_setup_host() - Setup the PCIe controller for RC opertaion + * + * @pcie: Pointer to the PCI controller state + * + * Configure the host BARs of the PCIe controller root port so that + * PCI(e) devices may access the system memory. + */ +void pcie_dw_setup_host(struct pcie_dw *pci) +{ + struct udevice *ctlr = pci_get_controller(pci->dev); + struct pci_controller *hose = dev_get_uclass_priv(ctlr); + u32 ret; + + if (!pci->atu_base) + pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET; + + /* setup RC BARs */ + writel(PCI_BASE_ADDRESS_MEM_TYPE_64, + pci->dbi_base + PCI_BASE_ADDRESS_0); + writel(0x0, pci->dbi_base + PCI_BASE_ADDRESS_1); + + /* setup interrupt pins */ + clrsetbits_le32(pci->dbi_base + PCI_INTERRUPT_LINE, + 0xff00, 0x100); + + /* setup bus numbers */ + clrsetbits_le32(pci->dbi_base + PCI_PRIMARY_BUS, + 0xffffff, 0x00ff0100); + + /* setup command register */ + clrsetbits_le32(pci->dbi_base + PCI_PRIMARY_BUS, + 0xffff, + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER | PCI_COMMAND_SERR); + + /* Enable write permission for the DBI read-only register */ + dw_pcie_dbi_write_enable(pci, true); + /* program correct class for RC */ + writew(PCI_CLASS_BRIDGE_PCI, pci->dbi_base + PCI_CLASS_DEVICE); + /* Better disable write permission right after the update */ + dw_pcie_dbi_write_enable(pci, false); + + setbits_le32(pci->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL, + PORT_LOGIC_SPEED_CHANGE); + + for (ret = 0; ret < hose->region_count; ret++) { + if (hose->regions[ret].flags == PCI_REGION_IO) { + pci->io.phys_start = hose->regions[ret].phys_start; /* IO base */ + pci->io.bus_start = hose->regions[ret].bus_start; /* IO_bus_addr */ + pci->io.size = hose->regions[ret].size; /* IO size */ + } else if (hose->regions[ret].flags == PCI_REGION_MEM) { + pci->mem.phys_start = hose->regions[ret].phys_start; /* MEM base */ + pci->mem.bus_start = hose->regions[ret].bus_start; /* MEM_bus_addr */ + pci->mem.size = hose->regions[ret].size; /* MEM size */ + } else if (hose->regions[ret].flags == PCI_REGION_PREFETCH) { + pci->prefetch.phys_start = hose->regions[ret].phys_start; /* PREFETCH base */ + pci->prefetch.bus_start = hose->regions[ret].bus_start; /* PREFETCH_bus_addr */ + pci->prefetch.size = hose->regions[ret].size; /* PREFETCH size */ + } else if (hose->regions[ret].flags == PCI_REGION_SYS_MEMORY) { + pci->cfg_base = (void *)(pci->io.phys_start - pci->io.size); + pci->cfg_size = pci->io.size; + } else { + dev_err(pci->dev, "invalid flags type!\n"); + } + } + + dev_dbg(pci->dev, "Config space: [0x%p - 0x%p, size 0x%llx]\n", + pci->cfg_base, pci->cfg_base + pci->cfg_size, + pci->cfg_size); + + dev_dbg(pci->dev, "IO space: [0x%llx - 0x%llx, size 0x%lx]\n", + pci->io.phys_start, pci->io.phys_start + pci->io.size, + pci->io.size); + + dev_dbg(pci->dev, "IO bus: [0x%lx - 0x%lx, size 0x%lx]\n", + pci->io.bus_start, pci->io.bus_start + pci->io.size, + pci->io.size); + + dev_dbg(pci->dev, "MEM space: [0x%llx - 0x%llx, size 0x%lx]\n", + pci->mem.phys_start, pci->mem.phys_start + pci->mem.size, + pci->mem.size); + + dev_dbg(pci->dev, "MEM bus: [0x%lx - 0x%lx, size 0x%lx]\n", + pci->mem.bus_start, pci->mem.bus_start + pci->mem.size, + pci->mem.size); + + if (pci->prefetch.size) { + dev_dbg(pci->dev, "PREFETCH space: [0x%llx - 0x%llx, size 0x%lx]\n", + pci->prefetch.phys_start, pci->prefetch.phys_start + pci->prefetch.size, + pci->prefetch.size); + + dev_dbg(pci->dev, "PREFETCH bus: [0x%lx - 0x%lx, size 0x%lx]\n", + pci->prefetch.bus_start, pci->prefetch.bus_start + pci->prefetch.size, + pci->prefetch.size); + } +} diff --git a/drivers/pci/pcie_dw_common.h b/drivers/pci/pcie_dw_common.h new file mode 100644 index 0000000000..6b701645af --- /dev/null +++ b/drivers/pci/pcie_dw_common.h @@ -0,0 +1,155 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2021 BayLibre, SAS + * Author: Neil Armstrong + * + * Copyright (c) 2021 Rockchip, Inc. + * + * Copyright (C) 2018 Texas Instruments, Inc + */ + +#ifndef PCIE_DW_COMMON_H +#define PCIE_DW_COMMON_H + +#define DEFAULT_DBI_ATU_OFFSET (0x3 << 20) + +/* PCI DBICS registers */ +#define PCIE_LINK_STATUS_REG 0x80 +#define PCIE_LINK_STATUS_SPEED_OFF 16 +#define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF) +#define PCIE_LINK_STATUS_WIDTH_OFF 20 +#define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF) + +/* + * iATU Unroll-specific register definitions + * From 4.80 core version the address translation will be made by unroll. + * The registers are offset from atu_base + */ +#define PCIE_ATU_UNR_REGION_CTRL1 0x00 +#define PCIE_ATU_UNR_REGION_CTRL2 0x04 +#define PCIE_ATU_UNR_LOWER_BASE 0x08 +#define PCIE_ATU_UNR_UPPER_BASE 0x0c +#define PCIE_ATU_UNR_LIMIT 0x10 +#define PCIE_ATU_UNR_LOWER_TARGET 0x14 +#define PCIE_ATU_UNR_UPPER_TARGET 0x18 + +#define PCIE_ATU_REGION_INDEX1 (0x1 << 0) +#define PCIE_ATU_REGION_INDEX0 (0x0 << 0) +#define PCIE_ATU_TYPE_MEM (0x0 << 0) +#define PCIE_ATU_TYPE_IO (0x2 << 0) +#define PCIE_ATU_TYPE_CFG0 (0x4 << 0) +#define PCIE_ATU_TYPE_CFG1 (0x5 << 0) +#define PCIE_ATU_ENABLE (0x1 << 31) +#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) +#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) +#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) +#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) + +/* Register address builder */ +#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) ((region) << 9) + +/* Parameters for the waiting for iATU enabled routine */ +#define LINK_WAIT_MAX_IATU_RETRIES 5 +#define LINK_WAIT_IATU_US 10000 + +/* PCI DBICS registers */ +#define PCIE_LINK_STATUS_REG 0x80 +#define PCIE_LINK_STATUS_SPEED_OFF 16 +#define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF) +#define PCIE_LINK_STATUS_WIDTH_OFF 20 +#define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF) + +#define PCIE_LINK_CAPABILITY 0x7c +#define PCIE_LINK_CTL_2 0xa0 +#define TARGET_LINK_SPEED_MASK 0xf +#define LINK_SPEED_GEN_1 0x1 +#define LINK_SPEED_GEN_2 0x2 +#define LINK_SPEED_GEN_3 0x3 + +/* Synopsys-specific PCIe configuration registers */ +#define PCIE_PORT_LINK_CONTROL 0x710 +#define PORT_LINK_DLL_LINK_EN BIT(5) +#define PORT_LINK_FAST_LINK_MODE BIT(7) +#define PORT_LINK_MODE_MASK GENMASK(21, 16) +#define PORT_LINK_MODE(n) FIELD_PREP(PORT_LINK_MODE_MASK, n) +#define PORT_LINK_MODE_1_LANES PORT_LINK_MODE(0x1) +#define PORT_LINK_MODE_2_LANES PORT_LINK_MODE(0x3) +#define PORT_LINK_MODE_4_LANES PORT_LINK_MODE(0x7) +#define PORT_LINK_MODE_8_LANES PORT_LINK_MODE(0xf) + +#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C +#define PORT_LOGIC_N_FTS_MASK GENMASK(7, 0) +#define PORT_LOGIC_SPEED_CHANGE BIT(17) +#define PORT_LOGIC_LINK_WIDTH_MASK GENMASK(12, 8) +#define PORT_LOGIC_LINK_WIDTH(n) FIELD_PREP(PORT_LOGIC_LINK_WIDTH_MASK, n) +#define PORT_LOGIC_LINK_WIDTH_1_LANES PORT_LOGIC_LINK_WIDTH(0x1) +#define PORT_LOGIC_LINK_WIDTH_2_LANES PORT_LOGIC_LINK_WIDTH(0x2) +#define PORT_LOGIC_LINK_WIDTH_4_LANES PORT_LOGIC_LINK_WIDTH(0x4) +#define PORT_LOGIC_LINK_WIDTH_8_LANES PORT_LOGIC_LINK_WIDTH(0x8) + +#define PCIE_MISC_CONTROL_1_OFF 0x8bc +#define PCIE_DBI_RO_WR_EN BIT(0) + +/* Parameters for the waiting for iATU enabled routine */ +#define LINK_WAIT_MAX_IATU_RETRIES 5 +#define LINK_WAIT_IATU 10000 + +/** + * struct pcie_dw - DW PCIe controller state + * + * @dbi_base: The base address of dbi register space + * @cfg_base: The base address of configuration space + * @atu_base: The base address of ATU space + * @cfg_size: The size of the configuration space which is needed + * as it gets written into the PCIE_ATU_LIMIT register + * @first_busno: This driver supports multiple PCIe controllers. + * first_busno stores the bus number of the PCIe root-port + * number which may vary depending on the PCIe setup + * (PEX switches etc). + * @io: The IO space for EP's BAR + * @mem: The memory space for EP's BAR + * @prefetch: The prefetch space for EP's BAR + */ +struct pcie_dw { + struct udevice *dev; + void __iomem *dbi_base; + void __iomem *cfg_base; + void __iomem *atu_base; + fdt_size_t cfg_size; + + int first_busno; + + /* IO, MEM & PREFETCH PCI regions */ + struct pci_region io; + struct pci_region mem; + struct pci_region prefetch; +}; + +int pcie_dw_get_link_speed(struct pcie_dw *pci); + +int pcie_dw_get_link_width(struct pcie_dw *pci); + +int pcie_dw_prog_outbound_atu_unroll(struct pcie_dw *pci, int index, int type, u64 cpu_addr, + u64 pci_addr, u32 size); + +int pcie_dw_read_config(const struct udevice *bus, pci_dev_t bdf, uint offset, ulong *valuep, + enum pci_size_t size); + +int pcie_dw_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, ulong value, + enum pci_size_t size); + +static inline void dw_pcie_dbi_write_enable(struct pcie_dw *pci, bool en) +{ + u32 val; + + val = readl(pci->dbi_base + PCIE_MISC_CONTROL_1_OFF); + if (en) + val |= PCIE_DBI_RO_WR_EN; + else + val &= ~PCIE_DBI_RO_WR_EN; + writel(val, pci->dbi_base + PCIE_MISC_CONTROL_1_OFF); +} + +void pcie_dw_setup_host(struct pcie_dw *pci); + +#endif -- 2.39.5