From dd5b58c49129016a02e41d6fda2213888d13c115 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sun, 4 Dec 2022 10:04:49 -0500 Subject: [PATCH] global: Migrate CONFIG_MALLOC_F_ADDR to CFG Perform a simple rename of CONFIG_MALLOC_F_ADDR to CFG_MALLOC_F_ADDR Signed-off-by: Tom Rini --- arch/sandbox/cpu/start.c | 2 +- common/init/board_init.c | 2 +- common/spl/spl.c | 4 ++-- doc/arch/sandbox/sandbox.rst | 2 +- include/configs/capricorn-common.h | 2 +- include/configs/cgtqmx8.h | 2 +- include/configs/imx8mm-cl-iot-gate.h | 2 +- include/configs/imx8mm_beacon.h | 2 +- include/configs/imx8mm_data_modul_edm_sbc.h | 2 +- include/configs/imx8mm_evk.h | 2 +- include/configs/imx8mm_icore_mx8mm.h | 2 +- include/configs/imx8mm_venice.h | 2 +- include/configs/imx8mp_rsb3720.h | 2 +- include/configs/imx8mq_cm.h | 2 +- include/configs/imx8mq_evk.h | 2 +- include/configs/imx8mq_phanbell.h | 2 +- include/configs/imx8qm_mek.h | 2 +- include/configs/imx8qxp_mek.h | 2 +- include/configs/imx8ulp_evk.h | 2 +- include/configs/imx93_evk.h | 2 +- include/configs/kontron-sl-mx8mm.h | 2 +- include/configs/kontron_pitx_imx8m.h | 2 +- include/configs/kontron_sl28.h | 2 +- include/configs/phycore_imx8mm.h | 2 +- include/configs/pico-imx8mq.h | 2 +- include/configs/sandbox.h | 2 +- include/configs/verdin-imx8mm.h | 2 +- include/configs/verdin-imx8mp.h | 2 +- 28 files changed, 29 insertions(+), 29 deletions(-) diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c index 622df41f54..234652872e 100644 --- a/arch/sandbox/cpu/start.c +++ b/arch/sandbox/cpu/start.c @@ -535,7 +535,7 @@ int sandbox_main(int argc, char *argv[]) } #if CONFIG_VAL(SYS_MALLOC_F_LEN) - gd->malloc_base = CONFIG_MALLOC_F_ADDR; + gd->malloc_base = CFG_MALLOC_F_ADDR; #endif #if CONFIG_IS_ENABLED(LOG) gd->default_log_level = state->default_log_level; diff --git a/common/init/board_init.c b/common/init/board_init.c index 6a55026177..96ffb79a98 100644 --- a/common/init/board_init.c +++ b/common/init/board_init.c @@ -78,7 +78,7 @@ __weak void board_init_f_init_stack_protection(void) ulong board_init_f_alloc_reserve(ulong top) { /* Reserve early malloc arena */ -#ifndef CONFIG_MALLOC_F_ADDR +#ifndef CFG_MALLOC_F_ADDR #if CONFIG_VAL(SYS_MALLOC_F_LEN) top -= CONFIG_VAL(SYS_MALLOC_F_LEN); #endif diff --git a/common/spl/spl.c b/common/spl/spl.c index 1d2e8fda72..4668367b68 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -527,8 +527,8 @@ static int spl_common_init(bool setup_malloc) #if CONFIG_VAL(SYS_MALLOC_F_LEN) if (setup_malloc) { -#ifdef CONFIG_MALLOC_F_ADDR - gd->malloc_base = CONFIG_MALLOC_F_ADDR; +#ifdef CFG_MALLOC_F_ADDR + gd->malloc_base = CFG_MALLOC_F_ADDR; #endif gd->malloc_limit = CONFIG_VAL(SYS_MALLOC_F_LEN); gd->malloc_ptr = 0; diff --git a/doc/arch/sandbox/sandbox.rst b/doc/arch/sandbox/sandbox.rst index e6d8403651..cd7f8a2cb0 100644 --- a/doc/arch/sandbox/sandbox.rst +++ b/doc/arch/sandbox/sandbox.rst @@ -615,7 +615,7 @@ Addr Config Usage ======= ======================== =============================== 0 CONFIG_SYS_FDT_LOAD_ADDR Device tree c000 CONFIG_BLOBLIST_ADDR Blob list - 10000 CONFIG_MALLOC_F_ADDR Early memory allocation + 10000 CFG_MALLOC_F_ADDR Early memory allocation f0000 CONFIG_PRE_CON_BUF_ADDR Pre-console buffer 100000 CONFIG_TRACE_EARLY_ADDR Early trace buffer (if enabled). Also used as the SPL load buffer in spl_test_load(). diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 19c7fca03b..9e7322cdb9 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -14,7 +14,7 @@ /* SPL config */ #ifdef CONFIG_SPL_BUILD -#define CONFIG_MALLOC_F_ADDR 0x00120000 +#define CFG_MALLOC_F_ADDR 0x00120000 #endif /* CONFIG_SPL_BUILD */ diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index caa1498ace..a633259738 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -13,7 +13,7 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SERIAL_LPUART_BASE 0x5a060000 -#define CONFIG_MALLOC_F_ADDR 0x00120000 +#define CFG_MALLOC_F_ADDR 0x00120000 #endif diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index 7785bdc7cb..64cdc401d0 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -16,7 +16,7 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x912000 +#define CFG_MALLOC_F_ADDR 0x912000 /* For RAW image gives a error info not panic */ #endif diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index ee524f0e63..d85ae21e23 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -14,7 +14,7 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ #endif diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h index 44d74bb1a7..0723d27ab7 100644 --- a/include/configs/imx8mm_data_modul_edm_sbc.h +++ b/include/configs/imx8mm_data_modul_edm_sbc.h @@ -11,7 +11,7 @@ #include #ifdef CONFIG_SPL_BUILD -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index c364e06dc4..d5642b9649 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -24,7 +24,7 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ #endif diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index e718daa07c..2158b0af74 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -15,7 +15,7 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -# define CONFIG_MALLOC_F_ADDR 0x930000 +# define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ #endif /* CONFIG_SPL_BUILD */ diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index c490e3829f..5579a05d16 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -14,7 +14,7 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 #endif /* Enable Distro Boot */ diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h index 38ae5f1370..e4e24b522f 100644 --- a/include/configs/imx8mp_rsb3720.h +++ b/include/configs/imx8mp_rsb3720.h @@ -24,7 +24,7 @@ 0x5f, 0xd3, 0x6b, 0x9b, 0xe5, 0xb9) #ifdef CONFIG_SPL_BUILD -#define CONFIG_MALLOC_F_ADDR 0x184000 /* malloc f used before \ +#define CFG_MALLOC_F_ADDR 0x184000 /* malloc f used before \ * GD_FLG_FULL_MALLOC_INIT \ * set \ */ diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index f6f356d27b..f7ae1b47d0 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -14,7 +14,7 @@ #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 +#define CFG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ #endif diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index d9ce5d5d0f..4b46321e85 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -15,7 +15,7 @@ #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 +#define CFG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index eb7059f064..5158f2cc60 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -14,7 +14,7 @@ #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 +#define CFG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ #endif diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 7772e71013..a25efbb16b 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -12,7 +12,7 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SERIAL_LPUART_BASE 0x5a060000 -#define CONFIG_MALLOC_F_ADDR 0x00120000 +#define CFG_MALLOC_F_ADDR 0x00120000 #endif diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index 669da591fa..4f55ae4940 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -12,7 +12,7 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SERIAL_LPUART_BASE 0x5a060000 -#define CONFIG_MALLOC_F_ADDR 0x00120000 +#define CFG_MALLOC_F_ADDR 0x00120000 #endif diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index b7397f6038..d77510e168 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -12,7 +12,7 @@ #define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_MALLOC_F_ADDR 0x22040000 +#define CFG_MALLOC_F_ADDR 0x22040000 #endif diff --git a/include/configs/imx93_evk.h b/include/configs/imx93_evk.h index 5cd6492dd5..7b7bef3ca7 100644 --- a/include/configs/imx93_evk.h +++ b/include/configs/imx93_evk.h @@ -14,7 +14,7 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_MALLOC_F_ADDR 0x204D0000 +#define CFG_MALLOC_F_ADDR 0x204D0000 #endif #ifdef CONFIG_DISTRO_DEFAULTS diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h index e4d6a8a154..d80238bd02 100644 --- a/include/configs/kontron-sl-mx8mm.h +++ b/include/configs/kontron-sl-mx8mm.h @@ -46,7 +46,7 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 #endif #define CFG_EXTRA_ENV_SETTINGS BOOTENV diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h index 4dd51c7f1d..5a3c9f76a4 100644 --- a/include/configs/kontron_pitx_imx8m.h +++ b/include/configs/kontron_pitx_imx8m.h @@ -16,7 +16,7 @@ #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 +#define CFG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 0d293f316b..940bfd2b33 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -28,7 +28,7 @@ /* generic timer */ /* early heap for SPL DM */ -#define CONFIG_MALLOC_F_ADDR CFG_SYS_FSL_OCRAM_BASE +#define CFG_MALLOC_F_ADDR CFG_SYS_FSL_OCRAM_BASE /* serial port */ #define CFG_SYS_NS16550_CLK (get_bus_freq(0) / 2) diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index 9160c78c04..ce6dc87c69 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -16,7 +16,7 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ #endif diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 1d8709180c..37ade717ae 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -14,7 +14,7 @@ #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 +#define CFG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ #endif diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 8d9af7f088..4e5653dc88 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -6,7 +6,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MALLOC_F_ADDR 0x0010000 +#define CFG_MALLOC_F_ADDR 0x0010000 /* Size of our emulated memory */ #define SB_CONCAT(x, y) x ## y diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index 7f3fa795af..27d7efb883 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -14,7 +14,7 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ #endif diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h index 2cb076caba..942081ab84 100644 --- a/include/configs/verdin-imx8mp.h +++ b/include/configs/verdin-imx8mp.h @@ -16,7 +16,7 @@ /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x184000 +#define CFG_MALLOC_F_ADDR 0x184000 /* For RAW image gives a error info not panic */ #endif /* CONFIG_SPL_BUILD */ -- 2.39.5