From d9a9174fa5687521035b2ec82cce86cdcf4f36e6 Mon Sep 17 00:00:00 2001 From: Alex Marginean Date: Tue, 16 Jul 2019 11:21:17 +0300 Subject: [PATCH] drivers: net: driver for MDIO muxes controlled over I2C This driver is used for MDIO muxes driven over I2C. This is currently used on Freescale LS1028A QDS board, on which the physical MDIO MUX is controlled by an on-board FPGA which in turn is configured through I2C. Signed-off-by: Alex Marginean Acked-by: Joe Hershberger Reviewed-by: Bin Meng --- drivers/net/Kconfig | 8 ++++++++ drivers/net/Makefile | 1 + 2 files changed, 9 insertions(+) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 4d85fb1716..883b849b78 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -595,4 +595,12 @@ config FSL_ENETC This driver supports the NXP ENETC Ethernet controller found on some of the NXP SoCs. +config MDIO_MUX_I2CREG + bool "MDIO MUX accessed as a register over I2C" + depends on DM_MDIO_MUX && DM_I2C + help + This driver is used for MDIO muxes driven by writing to a register of + an I2C chip. The board it was developed for uses a mux controlled by + on-board FPGA which in turn is accessed as a chip over I2C. + endif # NETDEVICES diff --git a/drivers/net/Makefile b/drivers/net/Makefile index b6e40df522..71c0889355 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_LAN91C96) += lan91c96.o obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o obj-$(CONFIG_MACB) += macb.o obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o +obj-$(CONFIG_MDIO_MUX_I2CREG) += mdio_mux_i2creg.o obj-$(CONFIG_MDIO_MUX_SANDBOX) += mdio_mux_sandbox.o obj-$(CONFIG_MPC8XX_FEC) += mpc8xx_fec.o obj-$(CONFIG_MT7628_ETH) += mt7628-eth.o -- 2.39.5