From d9a20fea2ba53db3a999827d3e50e181d5513e09 Mon Sep 17 00:00:00 2001 From: Mathieu Othacehe Date: Mon, 19 Feb 2024 18:05:31 +0100 Subject: [PATCH] usb: ehci-mx6: Add i.MX93 support i.MX93 uses the same USB IP as i.MX8MM. It can then reuse the ehci-mx6 driver. Reviewed-by: Marek Vasut Signed-off-by: Mathieu Othacehe Reviewed-by: Fabio Estevam --- drivers/usb/host/Kconfig | 6 +++--- drivers/usb/host/ehci-mx6.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 0dd5736433..f96027d7bd 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -210,10 +210,10 @@ config USB_EHCI_MX6 config USB_EHCI_MX7 bool "Support for i.MX7 on-chip EHCI USB controller" - depends on ARCH_MX7 || IMX8M + depends on ARCH_MX7 || IMX8M || IMX93 select EHCI_HCD_INIT_AFTER_RESET if ARCH_MX7 - select PHY if IMX8M - select NOP_PHY if IMX8M + select PHY if IMX8M || IMX93 + select NOP_PHY if IMX8M || IMX93 default y ---help--- Enables support for the on-chip EHCI controller on i.MX7 SoCs. diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index a9ed5e7a0d..a35fcca43a 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -538,7 +538,7 @@ static int ehci_usb_phy_mode(struct udevice *dev) plat->init_type = USB_INIT_DEVICE; else plat->init_type = USB_INIT_HOST; - } else if (is_mx7() || is_imx8mm() || is_imx8mn()) { + } else if (is_mx7() || is_imx8mm() || is_imx8mn() || is_imx93()) { phy_status = (void __iomem *)(addr + USBNC_PHY_STATUS_OFFSET); val = readl(phy_status); -- 2.39.5