From d1edea248ac19ad594cfeca325b4914e566f2b22 Mon Sep 17 00:00:00 2001
From: Chuanhua Han <chuanhua.han@nxp.com>
Date: Wed, 10 Jul 2019 21:00:24 +0800
Subject: [PATCH] armv8: dts: fsl-lx2160a: add i2c controller and gpio DT nodes

In lx2160a soc, there are eight i2c controllers, this patch adds i2c
nodes for lx2160a, and the gpio2 nodes on which the i2c4 controller
depends.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
---
 arch/arm/dts/fsl-lx2160a.dtsi | 85 +++++++++++++++++++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi
index 28220781d3..a189333e40 100644
--- a/arch/arm/dts/fsl-lx2160a.dtsi
+++ b/arch/arm/dts/fsl-lx2160a.dtsi
@@ -49,6 +49,80 @@
 			     <1 10 0x8>; /* Hypervisor PPI, active-low */
 	};
 
+	i2c0: i2c@2000000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2000000 0x0 0x10000>;
+		interrupts = <0 34 4>;
+		scl-gpio = <&gpio2 15 0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@2010000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2010000 0x0 0x10000>;
+		interrupts = <0 34 4>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@2020000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2020000 0x0 0x10000>;
+		interrupts = <0 35 4>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@2030000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2030000 0x0 0x10000>;
+		interrupts = <0 35 4>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@2040000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2040000 0x0 0x10000>;
+		interrupts = <0 74 4>;
+		scl-gpio = <&gpio2 16 0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@2050000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2050000 0x0 0x10000>;
+		interrupts = <0 74 4>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@2060000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2060000 0x0 0x10000>;
+		interrupts = <0 75 4>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@2070000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2070000 0x0 0x10000>;
+		interrupts = <0 75 4>;
+		status = "disabled";
+	};
+
 	uart0: serial@21c0000 {
 		compatible = "arm,pl011";
 		reg = <0x0 0x21c0000 0x0 0x1000>;
@@ -102,6 +176,17 @@
 		num-cs = <6>;
 	};
 
+	gpio2: gpio@2320000 {
+		compatible = "fsl,qoriq-gpio";
+		reg = <0x0 0x2320000 0x0 0x10000>;
+		interrupts = <0 37 4>;
+		gpio-controller;
+		little-endian;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 	usb0: usb3@3100000 {
 		compatible = "fsl,layerscape-dwc3";
 		reg = <0x0 0x3100000 0x0 0x10000>;
-- 
2.39.5