From d169313dda3cd92e3317867aec0b1b6c4799a99d Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 7 Mar 2022 16:24:01 -0800 Subject: [PATCH] board: gateworks: gw_ventana: move SPL uart config out of common Since DM_SERIAL is used for U-Boot we no longer need legacy UART code in common.c shared by the SPL and U-Boot. Move the legacy UART config to the non-DM SPL. Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/common.c | 11 ----------- board/gateworks/gw_ventana/common.h | 2 -- board/gateworks/gw_ventana/gw_ventana_spl.c | 11 +++++++++++ 3 files changed, 11 insertions(+), 13 deletions(-) diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 2be6518b63..6b8900e45b 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -19,17 +19,6 @@ #include "common.h" -/* UART2: Serial Console */ -static iomux_v3_cfg_t const uart2_pads[] = { - IOMUX_PADS(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), -}; - -void setup_iomux_uart(void) -{ - SETUP_IOMUX_PADS(uart2_pads); -} - /* MMC */ static iomux_v3_cfg_t const gw5904_emmc_pads[] = { IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h index 526ff066b6..d7f60a0b5d 100644 --- a/board/gateworks/gw_ventana/common.h +++ b/board/gateworks/gw_ventana/common.h @@ -79,8 +79,6 @@ struct ventana { extern struct ventana gpio_cfg[GW_UNKNOWN]; -/* configure uart iomux */ -void setup_iomux_uart(void); /* configure gpio iomux/defaults */ void setup_iomux_gpio(int board, struct ventana_board_info *); /* late setup of GPIO (configuration per baseboard and env) */ diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index 60e2768d2e..2d6ef30b9b 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -671,6 +671,17 @@ static void ccgr_init(void) writel(0x000003FF, &ccm->CCGR6); } +/* UART2: Serial Console */ +static const iomux_v3_cfg_t uart2_pads[] = { + IOMUX_PADS(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), + IOMUX_PADS(PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), +}; + +void setup_iomux_uart(void) +{ + SETUP_IOMUX_PADS(uart2_pads); +} + /* * I2C pad configs: * I2C1: GSC -- 2.39.5