From cbeba3515208c9e8db3dba3d5af5ec838c1065b3 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 25 Mar 2022 11:50:07 +0100 Subject: [PATCH] serial: zynq: Change fifo behavior in debug mode Serial IP has output buffer which status is indicated by two bits. If fifo if empty or full. Default configuration is that chars are pushed to fifo till it is full. Time to time it is visible that chars are scambled and logs are not visible. Not sure what it is exactly happening but all the time it helps to change driver behavior to write only one char at a time. That's why enable this mode when debug uart is enabled not to see scrambled chars in debug by default. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/332b2106d7a8190dd1001b5387f8bd1fba2e061b.1648205405.git.michal.simek@xilinx.com --- drivers/serial/serial_zynq.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index fd999368ab..6bb003dc15 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -21,6 +21,7 @@ #define ZYNQ_UART_SR_TXACTIVE BIT(11) /* TX active */ #define ZYNQ_UART_SR_TXFULL BIT(4) /* TX FIFO full */ +#define ZYNQ_UART_SR_TXEMPTY BIT(3) /* TX FIFO empty */ #define ZYNQ_UART_SR_RXEMPTY BIT(1) /* RX FIFO empty */ #define ZYNQ_UART_CR_TX_EN BIT(4) /* TX enabled */ @@ -107,8 +108,13 @@ static void _uart_zynq_serial_init(struct uart_zynq *regs) static int _uart_zynq_serial_putc(struct uart_zynq *regs, const char c) { - if (readl(®s->channel_sts) & ZYNQ_UART_SR_TXFULL) - return -EAGAIN; + if (CONFIG_IS_ENABLED(DEBUG_UART_ZYNQ)) { + if (!(readl(®s->channel_sts) & ZYNQ_UART_SR_TXEMPTY)) + return -EAGAIN; + } else { + if (readl(®s->channel_sts) & ZYNQ_UART_SR_TXFULL) + return -EAGAIN; + } writel(c, ®s->tx_rx_fifo); -- 2.39.5