From c435a7c8c1b872d38fcc671369f6e290d2fff08c Mon Sep 17 00:00:00 2001 From: Shaohui Xie Date: Mon, 17 Oct 2016 16:20:48 +0800 Subject: [PATCH] armv8: ls2080aqds: fix SGMII repeater settings The current value to check whether the PHY was configured has dependency on MC, it expects MC to start PCS AN, this is not true during boot up, so it should be changed to remove the dependency. The PHY's register space should be restore to default after accessing extended space. Signed-off-by: Shaohui Xie Reviewed-by: York Sun --- board/freescale/ls2080aqds/eth.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c index 8618506b8b..59361e9111 100644 --- a/board/freescale/ls2080aqds/eth.c +++ b/board/freescale/ls2080aqds/eth.c @@ -144,8 +144,10 @@ static void sgmii_configure_repeater(int serdes_port) mdelay(10); - if ((value & 0xfff) == 0x40f) { + if ((value & 0xfff) == 0x401) { printf("DPMAC %d:PHY is ..... Configured\n", dpmac_id); + miiphy_write(dev[mii_bus], riser_phy_addr[dpmac], + 0x1f, 0); continue; } @@ -181,28 +183,29 @@ static void sgmii_configure_repeater(int serdes_port) if (ret > 0) goto error; - mdelay(1); + mdelay(100); ret = miiphy_read(dev[mii_bus], riser_phy_addr[dpmac], 0x11, &value); if (ret > 0) goto error; - mdelay(10); - if ((value & 0xfff) == 0x40f) { + if ((value & 0xfff) == 0x401) { printf("DPMAC %d :PHY is configured ", dpmac_id); printf("after setting repeater 0x%x\n", value); i = 5; j = 5; - } else + } else { printf("DPMAC %d :PHY is failed to ", dpmac_id); printf("configure the repeater 0x%x\n", value); } + } } + miiphy_write(dev[mii_bus], riser_phy_addr[dpmac], 0x1f, 0); } error: if (ret) -- 2.39.5