From b9d4b64e442dfe4e5b41abfb1db48cdc6a823bb3 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Sun, 1 Dec 2019 11:23:20 +0100 Subject: [PATCH] imx6: aristainetos: add DM_I2C support enable DM_I2C in defconfig and remove i2c specific board code. Signed-off-by: Heiko Schocher --- board/aristainetos/aristainetos.c | 73 ------------------------------- configs/aristainetos2_defconfig | 6 ++- include/configs/aristainetos2.h | 11 ----- 3 files changed, 5 insertions(+), 85 deletions(-) diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c index 8d07edd3e0..0d1c06da5d 100644 --- a/board/aristainetos/aristainetos.c +++ b/board/aristainetos/aristainetos.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -35,12 +34,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE | PAD_CTL_SRE_FAST) - -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) - enum { BOARD_TYPE_4 = 4, BOARD_TYPE_7 = 7, @@ -49,32 +42,6 @@ enum { #define ARI_BT_4 "aristainetos2_4@2" #define ARI_BT_7 "aristainetos2_7@1" -struct i2c_pads_info i2c_pad_info3 = { - .scl = { - .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC, - .gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05 | PC, - .gp = IMX_GPIO_NR(1, 5) - }, - .sda = { - .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC, - .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC, - .gp = IMX_GPIO_NR(1, 6) - } -}; - -struct i2c_pads_info i2c_pad_info4 = { - .scl = { - .i2c_mode = MX6_PAD_GPIO_7__I2C4_SCL | PC, - .gpio_mode = MX6_PAD_GPIO_7__GPIO1_IO07 | PC, - .gp = IMX_GPIO_NR(1, 7) - }, - .sda = { - .i2c_mode = MX6_PAD_GPIO_8__I2C4_SDA | PC, - .gpio_mode = MX6_PAD_GPIO_8__GPIO1_IO08 | PC, - .gp = IMX_GPIO_NR(1, 8) - } -}; - static iomux_v3_cfg_t const backlight_pads[] = { /* backlight PWM brightness control */ MX6_PAD_GPIO_9__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), @@ -346,12 +313,6 @@ int board_early_init_f(void) return 0; } -static void setup_i2c4(void) -{ - setup_i2c(3, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, - &i2c_pad_info4); -} - static void setup_one_led(char *label, int state) { struct udevice *dev; @@ -430,32 +391,6 @@ int board_late_init(void) return 0; } -struct i2c_pads_info i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC, - .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC, - .gp = IMX_GPIO_NR(5, 27) - }, - .sda = { - .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC, - .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC, - .gp = IMX_GPIO_NR(5, 26) - } -}; - -struct i2c_pads_info i2c_pad_info2 = { - .scl = { - .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC, - .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC, - .gp = IMX_GPIO_NR(4, 12) - }, - .sda = { - .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC, - .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC, - .gp = IMX_GPIO_NR(4, 13) - } -}; - int dram_init(void) { gd->ram_size = imx_ddr_size(); @@ -575,14 +510,6 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - setup_i2c(0, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, - &i2c_pad_info1); - setup_i2c(1, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, - &i2c_pad_info2); - setup_i2c(2, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, - &i2c_pad_info3); - setup_i2c4(); - setup_board_gpio(); setup_gpmi_nand(); setup_display(); diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig index 243b4ff5aa..fd58aad4c2 100644 --- a/configs/aristainetos2_defconfig +++ b/configs/aristainetos2_defconfig @@ -36,7 +36,6 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y -CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y @@ -57,8 +56,11 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_GPIO=y CONFIG_GPIO_HOG=y CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y CONFIG_LED=y CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y CONFIG_DM_MMC=y CONFIG_FSL_USDHC=y CONFIG_MTD=y @@ -85,6 +87,8 @@ CONFIG_DM_PMIC=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_PWM_IMX=y +CONFIG_DM_RTC=y +CONFIG_RTC_DS1307=y CONFIG_DM_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index 45699dc614..1999c5c616 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -165,12 +165,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0x7f -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} } - /* NAND stuff */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 @@ -179,11 +173,6 @@ /* DMA stuff, needed for GPMI/MXS NAND support */ -/* RTC */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_RTC_BUS_NUM 2 -#define CONFIG_RTC_M41T11 - /* USB Configs */ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -- 2.39.5