From b8cabb0e3d77d20c36eb3e1adfb8832742ebbc61 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 5 Nov 2019 09:47:51 -0300 Subject: [PATCH] mx7ulp: Introduce the CONFIG_LDO_ENABLED_MODE option Introduce the CONFIG_LDO_ENABLED_MODE option so that i.MX7ULP boards designed to operate with LDO enabled mode can work with 0.95V at LDO output in RUN mode as per the datasheet. Signed-off-by: Fabio Estevam --- arch/arm/mach-imx/mx7ulp/Kconfig | 5 +++ arch/arm/mach-imx/mx7ulp/soc.c | 58 ++++++++++++++++++++++++++++++++ 2 files changed, 63 insertions(+) diff --git a/arch/arm/mach-imx/mx7ulp/Kconfig b/arch/arm/mach-imx/mx7ulp/Kconfig index ed5f0aeb2d..138c58363f 100644 --- a/arch/arm/mach-imx/mx7ulp/Kconfig +++ b/arch/arm/mach-imx/mx7ulp/Kconfig @@ -3,6 +3,11 @@ if ARCH_MX7ULP config SYS_SOC default "mx7ulp" +config LDO_ENABLED_MODE + bool "i.MX7ULP LDO Enabled Mode" + help + Select this option to enable the PMC1 LDO. + config MX7ULP bool diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c index 4343cac99c..fd40af7305 100644 --- a/arch/arm/mach-imx/mx7ulp/soc.c +++ b/arch/arm/mach-imx/mx7ulp/soc.c @@ -10,6 +10,22 @@ #include #include +#define PMC0_BASE_ADDR 0x410a1000 +#define PMC0_CTRL 0x28 +#define PMC0_CTRL_LDOEN BIT(31) +#define PMC0_CTRL_LDOOKDIS BIT(30) +#define PMC0_CTRL_PMC1ON BIT(24) +#define PMC1_BASE_ADDR 0x40400000 +#define PMC1_RUN 0x8 +#define PMC1_STOP 0x10 +#define PMC1_VLPS 0x14 +#define PMC1_RUN_LDOVL_SHIFT 16 +#define PMC1_RUN_LDOVL_MASK (0x3f << PMC1_RUN_LDOVL_SHIFT) +#define PMC1_RUN_LDOVL_900 0x1e +#define PMC1_RUN_LDOVL_950 0x23 +#define PMC1_STATUS 0x20 +#define PMC1_STATUS_LDOVLF BIT(8) + static char *get_reset_cause(char *); #if defined(CONFIG_IMX_HAB) @@ -101,6 +117,44 @@ void init_wdog(void) disable_wdog(WDG2_RBASE); } +#if defined(CONFIG_LDO_ENABLED_MODE) +static void init_ldo_mode(void) +{ + unsigned int reg; + + /* Set LDOOKDIS */ + setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL, PMC0_CTRL_LDOOKDIS); + + /* Set LDOVL to 0.95V in PMC1_RUN */ + reg = readl(PMC1_BASE_ADDR + PMC1_RUN); + reg &= ~PMC1_RUN_LDOVL_MASK; + reg |= (PMC1_RUN_LDOVL_950 << PMC1_RUN_LDOVL_SHIFT); + writel(PMC1_BASE_ADDR + PMC1_RUN, reg); + + /* Wait for LDOVLF to be cleared */ + reg = readl(PMC1_BASE_ADDR + PMC1_STATUS); + while (reg & PMC1_STATUS_LDOVLF) + ; + + /* Set LDOVL to 0.95V in PMC1_STOP */ + reg = readl(PMC1_BASE_ADDR + PMC1_STOP); + reg &= ~PMC1_RUN_LDOVL_MASK; + reg |= (PMC1_RUN_LDOVL_950 << PMC1_RUN_LDOVL_SHIFT); + writel(PMC1_BASE_ADDR + PMC1_STOP, reg); + + /* Set LDOVL to 0.90V in PMC1_VLPS */ + reg = readl(PMC1_BASE_ADDR + PMC1_VLPS); + reg &= ~PMC1_RUN_LDOVL_MASK; + reg |= (PMC1_RUN_LDOVL_900 << PMC1_RUN_LDOVL_SHIFT); + writel(PMC1_BASE_ADDR + PMC1_VLPS, reg); + + /* Set LDOEN bit */ + setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL, PMC0_CTRL_LDOEN); + + /* Set the PMC1ON bit */ + setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL, PMC0_CTRL_PMC1ON); +} +#endif void s_init(void) { @@ -114,6 +168,10 @@ void s_init(void) /* enable dumb pmic */ writel((readl(SNVS_LP_LPCR) | SNVS_LPCR_DPEN), SNVS_LP_LPCR); } + +#if defined(CONFIG_LDO_ENABLED_MODE) + init_ldo_mode(); +#endif return; } -- 2.39.5