From b16d7c3216fea40545a3ed1784345f3c851b28e8 Mon Sep 17 00:00:00 2001 From: Joel Johnson Date: Mon, 23 Mar 2020 14:21:36 -0600 Subject: [PATCH] arm: mvebu: clearfog: add SPI offsets Add reasonable default SPI offsets and ENV size when configured to boot from SPI flash. Signed-off-by: Joel Johnson Reviewed-by: Stefan Roese --- board/solidrun/clearfog/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/board/solidrun/clearfog/Kconfig b/board/solidrun/clearfog/Kconfig index 44224d903d..ea9c419472 100644 --- a/board/solidrun/clearfog/Kconfig +++ b/board/solidrun/clearfog/Kconfig @@ -39,4 +39,16 @@ config CLEARFOG_SFP_25GB SGMII connection (requires a supporting SFP). By default, transfer speed of 1.25 Gbps is used, suitable for a more common 1 Gbps SFP module. +config ENV_SECT_SIZE + hex "Environment Sector-Size" + # Use SPI flash erase block size of 4 KiB + default 0x1000 if MVEBU_SPL_BOOT_DEVICE_SPI + # Use optimistic 64 KiB erase block, will vary between actual media + default 0x10000 if MVEBU_SPL_BOOT_DEVICE_MMC + +config SYS_SPI_U_BOOT_OFFS + hex "address of u-boot payload in SPI flash" + default 0x20000 + depends on MVEBU_SPL_BOOT_DEVICE_SPI + endmenu -- 2.39.5