From adbff64af7b7cee3e0007b75df2644090edaafcb Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 21 Sep 2020 09:34:15 +0200 Subject: [PATCH] board: amlogic: vim3: add support for dynamic PCIe enable The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between an USB3.0 Type A connector and a M.2 Key M slot. The PHY driving these differential lines is shared between the USB3.0 controller and the PCIe Controller, thus only a single controller can use it. This adds this dynamic switching right before booting Linux and the configuration steps in the boards documentation. Signed-off-by: Neil Armstrong Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman [narmstrong: fixed warning by replacing min() by min_t()] --- board/amlogic/vim3/khadas-mcu.h | 81 ++++++++++++++++++++ board/amlogic/vim3/vim3.c | 117 +++++++++++++++++++++++++++++ configs/khadas-vim3_defconfig | 3 + configs/khadas-vim3l_defconfig | 3 + doc/board/amlogic/khadas-vim3.rst | 27 +++++++ doc/board/amlogic/khadas-vim3l.rst | 27 +++++++ 6 files changed, 258 insertions(+) create mode 100644 board/amlogic/vim3/khadas-mcu.h diff --git a/board/amlogic/vim3/khadas-mcu.h b/board/amlogic/vim3/khadas-mcu.h new file mode 100644 index 0000000000..de3758cafe --- /dev/null +++ b/board/amlogic/vim3/khadas-mcu.h @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Khadas System control Microcontroller Register map + * + * Copyright (C) 2020 BayLibre SAS + * + * Author(s): Neil Armstrong + */ + +#ifndef MFD_KHADAS_MCU_H +#define MFD_KHADAS_MCU_H + +#define KHADAS_MCU_PASSWD_VEN_0_REG 0x00 /* RO */ +#define KHADAS_MCU_PASSWD_VEN_1_REG 0x01 /* RO */ +#define KHADAS_MCU_PASSWD_VEN_2_REG 0x02 /* RO */ +#define KHADAS_MCU_PASSWD_VEN_3_REG 0x03 /* RO */ +#define KHADAS_MCU_PASSWD_VEN_4_REG 0x04 /* RO */ +#define KHADAS_MCU_PASSWD_VEN_5_REG 0x05 /* RO */ +#define KHADAS_MCU_MAC_0_REG 0x06 /* RO */ +#define KHADAS_MCU_MAC_1_REG 0x07 /* RO */ +#define KHADAS_MCU_MAC_2_REG 0x08 /* RO */ +#define KHADAS_MCU_MAC_3_REG 0x09 /* RO */ +#define KHADAS_MCU_MAC_4_REG 0x0a /* RO */ +#define KHADAS_MCU_MAC_5_REG 0x0b /* RO */ +#define KHADAS_MCU_USID_0_REG 0x0c /* RO */ +#define KHADAS_MCU_USID_1_REG 0x0d /* RO */ +#define KHADAS_MCU_USID_2_REG 0x0e /* RO */ +#define KHADAS_MCU_USID_3_REG 0x0f /* RO */ +#define KHADAS_MCU_USID_4_REG 0x10 /* RO */ +#define KHADAS_MCU_USID_5_REG 0x11 /* RO */ +#define KHADAS_MCU_VERSION_0_REG 0x12 /* RO */ +#define KHADAS_MCU_VERSION_1_REG 0x13 /* RO */ +#define KHADAS_MCU_DEVICE_NO_0_REG 0x14 /* RO */ +#define KHADAS_MCU_DEVICE_NO_1_REG 0x15 /* RO */ +#define KHADAS_MCU_FACTORY_TEST_REG 0x16 /* R */ +#define KHADAS_MCU_BOOT_MODE_REG 0x20 /* RW */ +#define KHADAS_MCU_BOOT_EN_WOL_REG 0x21 /* RW */ +#define KHADAS_MCU_BOOT_EN_RTC_REG 0x22 /* RW */ +#define KHADAS_MCU_BOOT_EN_EXP_REG 0x23 /* RW */ +#define KHADAS_MCU_BOOT_EN_IR_REG 0x24 /* RW */ +#define KHADAS_MCU_BOOT_EN_DCIN_REG 0x25 /* RW */ +#define KHADAS_MCU_BOOT_EN_KEY_REG 0x26 /* RW */ +#define KHADAS_MCU_KEY_MODE_REG 0x27 /* RW */ +#define KHADAS_MCU_LED_MODE_ON_REG 0x28 /* RW */ +#define KHADAS_MCU_LED_MODE_OFF_REG 0x29 /* RW */ +#define KHADAS_MCU_SHUTDOWN_NORMAL_REG 0x2c /* RW */ +#define KHADAS_MCU_MAC_SWITCH_REG 0x2d /* RW */ +#define KHADAS_MCU_MCU_SLEEP_MODE_REG 0x2e /* RW */ +#define KHADAS_MCU_IR_CODE1_0_REG 0x2f /* RW */ +#define KHADAS_MCU_IR_CODE1_1_REG 0x30 /* RW */ +#define KHADAS_MCU_IR_CODE1_2_REG 0x31 /* RW */ +#define KHADAS_MCU_IR_CODE1_3_REG 0x32 /* RW */ +#define KHADAS_MCU_USB_PCIE_SWITCH_REG 0x33 /* RW */ +#define KHADAS_MCU_IR_CODE2_0_REG 0x34 /* RW */ +#define KHADAS_MCU_IR_CODE2_1_REG 0x35 /* RW */ +#define KHADAS_MCU_IR_CODE2_2_REG 0x36 /* RW */ +#define KHADAS_MCU_IR_CODE2_3_REG 0x37 /* RW */ +#define KHADAS_MCU_PASSWD_USER_0_REG 0x40 /* RW */ +#define KHADAS_MCU_PASSWD_USER_1_REG 0x41 /* RW */ +#define KHADAS_MCU_PASSWD_USER_2_REG 0x42 /* RW */ +#define KHADAS_MCU_PASSWD_USER_3_REG 0x43 /* RW */ +#define KHADAS_MCU_PASSWD_USER_4_REG 0x44 /* RW */ +#define KHADAS_MCU_PASSWD_USER_5_REG 0x45 /* RW */ +#define KHADAS_MCU_USER_DATA_0_REG 0x46 /* RW 56 bytes */ +#define KHADAS_MCU_PWR_OFF_CMD_REG 0x80 /* WO */ +#define KHADAS_MCU_PASSWD_START_REG 0x81 /* WO */ +#define KHADAS_MCU_CHECK_VEN_PASSWD_REG 0x82 /* WO */ +#define KHADAS_MCU_CHECK_USER_PASSWD_REG 0x83 /* WO */ +#define KHADAS_MCU_SHUTDOWN_NORMAL_STATUS_REG 0x86 /* RO */ +#define KHADAS_MCU_WOL_INIT_START_REG 0x87 /* WO */ +#define KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG 0x88 /* WO */ + +enum { + KHADAS_BOARD_VIM1 = 0x1, + KHADAS_BOARD_VIM2, + KHADAS_BOARD_VIM3, + KHADAS_BOARD_EDGE = 0x11, + KHADAS_BOARD_EDGE_V, +}; + +#endif /* MFD_KHADAS_MCU_H */ diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c index 02d8cd0ce0..09ef39ff30 100644 --- a/board/amlogic/vim3/vim3.c +++ b/board/amlogic/vim3/vim3.c @@ -11,6 +11,123 @@ #include #include #include +#include +#include "khadas-mcu.h" + +/* + * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential + * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between + * an USB3.0 Type A connector and a M.2 Key M slot. + * The PHY driving these differential lines is shared between + * the USB3.0 controller and the PCIe Controller, thus only + * a single controller can use it. + */ +int meson_ft_board_setup(void *blob, struct bd_info *bd) +{ + struct udevice *bus, *dev; + int node, i2c_node, ret; + unsigned int i2c_addr; + u32 *val; + + /* Find I2C device */ + node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "khadas,mcu"); + if (node < 0) { + printf("vim3: cannot find khadas,mcu node\n"); + return 0; + } + + /* Get addr */ + val = (u32 *)fdt_getprop(gd->fdt_blob, node, "reg", NULL); + if (!val) { + printf("vim3: cannot find khadas,mcu node i2c addr\n"); + return 0; + } + i2c_addr = fdt32_to_cpu(*val); + + /* Get i2c device */ + i2c_node = fdt_parent_offset(gd->fdt_blob, node); + if (node < 0) { + printf("vim3: cannot find khadas,mcu i2c node\n"); + return 0; + } + + ret = uclass_get_device_by_of_offset(UCLASS_I2C, i2c_node, &bus); + if (ret < 0) { + printf("vim3: cannot find i2c bus (%d)\n", ret); + return 0; + } + + ret = i2c_get_chip(bus, i2c_addr, 1, &dev); + if (ret < 0) { + printf("vim3: cannot find i2c chip (%d)\n", ret); + return 0; + } + + /* Read USB_PCIE_SWITCH_REG */ + ret = dm_i2c_reg_read(dev, KHADAS_MCU_USB_PCIE_SWITCH_REG); + if (ret < 0) { + printf("vim3: failed to read i2c reg (%d)\n", ret); + return 0; + } + debug("MCU_USB_PCIE_SWITCH_REG: %d\n", ret); + + /* + * If in PCIe mode, alter DT + * 0：Enable USB3.0，Disable PCIE, 1：Disable USB3.0, Enable PCIE + */ + if (ret > 0) { + static char data[32] __aligned(4); + const void *ptmp; + int len; + + /* Find USB node */ + node = fdt_node_offset_by_compatible(blob, -1, "amlogic,meson-g12a-usb-ctrl"); + if (node < 0) { + printf("vim3: cannot find amlogic,meson-g12a-usb-ctrl node\n"); + return 0; + } + + /* Update PHY names (mandatory to disable USB3.0) */ + len = strlcpy(data, "usb2-phy0", 32) + 1; + len += strlcpy(&data[len], "usb2-phy1", 32 - len) + 1; + ret = fdt_setprop(blob, node, "phy-names", data, len); + if (ret < 0) { + printf("vim3: failed to update usb phy names property (%d)\n", ret); + return 0; + } + + /* Update PHY list, by keeping the 2 first entries (optional) */ + ptmp = fdt_getprop(blob, node, "phys", &len); + if (ptmp) { + memcpy(data, ptmp, min_t(unsigned int, 2 * sizeof(u32), len)); + + ret = fdt_setprop(blob, node, "phys", data, + min_t(unsigned int, 2 * sizeof(u32), len)); + if (ret < 0) + printf("vim3: failed to update usb phys property (%d)\n", ret); + } else + printf("vim3: cannot find usb node phys property\n"); + + /* Find PCIe node */ + node = fdt_node_offset_by_compatible(blob, -1, "amlogic,g12a-pcie"); + if (node < 0) { + printf("vim3: cannot find amlogic,g12a-pcie node\n"); + return 0; + } + + /* Enable PCIe */ + len = strlcpy(data, "okay", 32); + ret = fdt_setprop(blob, node, "status", data, len); + if (ret < 0) { + printf("vim3: failed to enable pcie node (%d)\n", ret); + return 0; + } + + printf("vim3: successfully enabled PCIe\n"); + } + + return 0; +} int misc_init_r(void) { diff --git a/configs/khadas-vim3_defconfig b/configs/khadas-vim3_defconfig index ee5990426d..df2d5bda5b 100644 --- a/configs/khadas-vim3_defconfig +++ b/configs/khadas-vim3_defconfig @@ -17,6 +17,7 @@ CONFIG_MISC_INIT_R=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF_TEST=y @@ -28,6 +29,8 @@ CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MESON=y CONFIG_DM_MMC=y CONFIG_MMC_MESON_GX=y CONFIG_MTD=y diff --git a/configs/khadas-vim3l_defconfig b/configs/khadas-vim3l_defconfig index 5729d339e9..39e74c3ccb 100644 --- a/configs/khadas-vim3l_defconfig +++ b/configs/khadas-vim3l_defconfig @@ -17,6 +17,7 @@ CONFIG_MISC_INIT_R=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF_TEST=y @@ -28,6 +29,8 @@ CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MESON=y CONFIG_DM_MMC=y CONFIG_MMC_MESON_GX=y CONFIG_MTD=y diff --git a/doc/board/amlogic/khadas-vim3.rst b/doc/board/amlogic/khadas-vim3.rst index c1c03212d2..d6a9642ad6 100644 --- a/doc/board/amlogic/khadas-vim3.rst +++ b/doc/board/amlogic/khadas-vim3.rst @@ -18,6 +18,33 @@ Technology Co., Ltd. with the following specifications: Schematics are available on the manufacturer website. +PCIe Setup +---------- +The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential +lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between +an USB3.0 Type A connector and a M.2 Key M slot. +The PHY driving these differential lines is shared between +the USB3.0 controller and the PCIe Controller, thus only +a single controller can use it. + +To setup for PCIe, run the following commands from U-Boot: + +.. code-block:: none + + i2c dev i2c@5000 + i2c mw 0x18 0x33 1 + +Then power-cycle the board. + +To set back to USB3.0, run the following commands from U-Boot: + +.. code-block:: none + + i2c dev i2c@5000 + i2c mw 0x18 0x33 0 + +Then power-cycle the board. + U-Boot compilation ------------------ diff --git a/doc/board/amlogic/khadas-vim3l.rst b/doc/board/amlogic/khadas-vim3l.rst index b380c17456..3c0a415a87 100644 --- a/doc/board/amlogic/khadas-vim3l.rst +++ b/doc/board/amlogic/khadas-vim3l.rst @@ -18,6 +18,33 @@ Technology Co., Ltd. with the following specifications: Schematics are available on the manufacturer website. +PCIe Setup +---------- +The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential +lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between +an USB3.0 Type A connector and a M.2 Key M slot. +The PHY driving these differential lines is shared between +the USB3.0 controller and the PCIe Controller, thus only +a single controller can use it. + +To setup for PCIe, run the following commands from U-Boot: + +.. code-block:: none + + i2c dev i2c@5000 + i2c mw 0x18 0x33 1 + +Then power-cycle the board. + +To set back to USB3.0, run the following commands from U-Boot: + +.. code-block:: none + + i2c dev i2c@5000 + i2c mw 0x18 0x33 0 + +Then power-cycle the board. + U-Boot compilation ------------------ -- 2.39.5