From aabbc2f8b2a4e1a458a34b9ff5becb997c6157ff Mon Sep 17 00:00:00 2001 From: Abdellatif El Khlifi Date: Thu, 13 Jul 2023 14:28:46 +0100 Subject: [PATCH] arm_ffa: efi: introduce FF-A MM communication Add MM communication support using FF-A transport This feature allows accessing MM partitions services through EFI MM communication protocol. MM partitions such as StandAlonneMM or smm-gateway secure partitions which reside in secure world. An MM shared buffer and a door bell event are used to exchange the data. The data is used by EFI services such as GetVariable()/SetVariable() and copied from the communication buffer to the MM shared buffer. The secure partition is notified about availability of data in the MM shared buffer by an FF-A message (door bell). On such event, MM SP can read the data and updates the MM shared buffer with the response data. The response data is copied back to the communication buffer and consumed by the EFI subsystem. MM communication protocol supports FF-A 64-bit direct messaging. Signed-off-by: Abdellatif El Khlifi Tested-by: Gowtham Suresh Kumar Reviewed-by: Simon Glass Cc: Tom Rini Cc: Ilias Apalodimas Cc: Jens Wiklander --- include/mm_communication.h | 13 ++ lib/efi_loader/Kconfig | 46 +++++- lib/efi_loader/efi_variable_tee.c | 257 +++++++++++++++++++++++++++++- 3 files changed, 309 insertions(+), 7 deletions(-) diff --git a/include/mm_communication.h b/include/mm_communication.h index e65fbde60d..f17847583b 100644 --- a/include/mm_communication.h +++ b/include/mm_communication.h @@ -6,6 +6,9 @@ * Copyright (c) 2017, Intel Corporation. All rights reserved. * Copyright (C) 2020 Linaro Ltd. * Copyright (C) 2020 Linaro Ltd. + * Copyright 2022-2023 Arm Limited and/or its affiliates + * Authors: + * Abdellatif El Khlifi */ #ifndef _MM_COMMUNICATION_H_ @@ -13,6 +16,9 @@ #include +/* MM service UUID string (big-endian format). This UUID is common across all MM SPs */ +#define MM_SP_UUID "33d532ed-e699-0942-c09c-a798d9cd722d" + /* * Interface to the pseudo Trusted Application (TA), which provides a * communication channel with the Standalone MM (Management Mode) @@ -248,4 +254,11 @@ struct smm_variable_var_check_property { u16 name[]; }; +/* supported MM transports */ +enum mm_comms_select { + MM_COMMS_UNDEFINED, + MM_COMMS_FFA, + MM_COMMS_OPTEE +}; + #endif /* _MM_COMMUNICATION_H_ */ diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig index a22e47616f..1cefdf0d21 100644 --- a/lib/efi_loader/Kconfig +++ b/lib/efi_loader/Kconfig @@ -55,13 +55,55 @@ config EFI_VARIABLE_FILE_STORE stored as file /ubootefi.var on the EFI system partition. config EFI_MM_COMM_TEE - bool "UEFI variables storage service via OP-TEE" - depends on OPTEE + bool "UEFI variables storage service via the trusted world" + select ARM_FFA_TRANSPORT + select TEE + select OPTEE help + Allowing access to the MM SP services (SPs such as StandAlonneMM, smm-gateway). + When using the u-boot OP-TEE driver, StandAlonneMM is supported. + When using the u-boot FF-A driver any MM SP is supported. + If OP-TEE is present and running StandAloneMM, dispatch all UEFI variable related operations to that. The application will verify, authenticate and store the variables on an RPMB. + When ARM_FFA_TRANSPORT is used, dispatch all UEFI variable related + operations to the MM SP running in the secure world. + A door bell mechanism is used to notify the SP when there is data in the shared + MM buffer. The data is copied by u-boot to the shared buffer before issuing + the door bell event. + +config FFA_SHARED_MM_BUF_SIZE + int "Memory size of the shared MM communication buffer" + default 0 + depends on EFI_MM_COMM_TEE + help + This defines the size in bytes of the memory area reserved for the shared + buffer used for communication between the MM feature in U-Boot and + the MM SP in secure world. + The size of the memory region must be a multiple of the size of the maximum + translation granule size that is specified in the ID_AA64MMFR0_EL1 System register. + It is assumed that the MM SP knows the size of the shared MM communication buffer. + +config FFA_SHARED_MM_BUF_OFFSET + int "Data offset in the shared MM communication buffer" + default 0 + depends on EFI_MM_COMM_TEE + help + This defines the offset in bytes of the data read or written to in the shared + buffer by the MM SP. + +config FFA_SHARED_MM_BUF_ADDR + hex "Define the address of the shared MM communication buffer" + default 0x0 + depends on EFI_MM_COMM_TEE + help + This defines the address of the shared MM communication buffer + used for communication between the MM feature in U-Boot and + the MM SP in secure world. + It is assumed that the MM SP knows the address of the shared MM communication buffer. + config EFI_VARIABLE_NO_STORE bool "Don't persist non-volatile UEFI variables" help diff --git a/lib/efi_loader/efi_variable_tee.c b/lib/efi_loader/efi_variable_tee.c index dfef18435d..5137b871ea 100644 --- a/lib/efi_loader/efi_variable_tee.c +++ b/lib/efi_loader/efi_variable_tee.c @@ -4,17 +4,34 @@ * * Copyright (C) 2019 Linaro Ltd. * Copyright (C) 2019 Linaro Ltd. + * Copyright 2022-2023 Arm Limited and/or its affiliates + * + * Authors: + * Abdellatif El Khlifi */ #include +#include +#include +#include #include #include #include #include -#include #include +#include #include +#include + +/* MM return codes */ +#define MM_SUCCESS (0) +#define MM_NOT_SUPPORTED (-1) +#define MM_INVALID_PARAMETER (-2) +#define MM_DENIED (-3) +#define MM_NO_MEMORY (-5) +static const char *mm_sp_svc_uuid = MM_SP_UUID; +static u16 mm_sp_id; extern struct efi_var_file __efi_runtime_data *efi_var_buf; static efi_uintn_t max_buffer_size; /* comm + var + func + data */ static efi_uintn_t max_payload_size; /* func + data */ @@ -145,16 +162,241 @@ static efi_status_t optee_mm_communicate(void *comm_buf, ulong dsize) } /** - * mm_communicate() - Adjust the cmonnucation buffer to StandAlonneMM and send + * ffa_notify_mm_sp() - Announce there is data in the shared buffer + * + * Notify the MM partition in the trusted world that + * data is available in the shared buffer. + * This is a blocking call during which trusted world has exclusive access + * to the MM shared buffer. + * + * Return: + * + * 0 on success + */ +static int ffa_notify_mm_sp(void) +{ + struct ffa_send_direct_data msg = {0}; + int ret; + int sp_event_ret; + struct udevice *dev; + + ret = uclass_first_device_err(UCLASS_FFA, &dev); + if (ret) { + log_err("EFI: Cannot find FF-A bus device, notify MM SP failure\n"); + return ret; + } + + msg.data0 = CONFIG_FFA_SHARED_MM_BUF_OFFSET; /* x3 */ + + ret = ffa_sync_send_receive(dev, mm_sp_id, &msg, 1); + if (ret) + return ret; + + sp_event_ret = msg.data0; /* x3 */ + + switch (sp_event_ret) { + case MM_SUCCESS: + ret = 0; + break; + case MM_NOT_SUPPORTED: + ret = -EINVAL; + break; + case MM_INVALID_PARAMETER: + ret = -EPERM; + break; + case MM_DENIED: + ret = -EACCES; + break; + case MM_NO_MEMORY: + ret = -EBUSY; + break; + default: + ret = -EACCES; + } + + return ret; +} + +/** + * ffa_discover_mm_sp_id() - Query the MM partition ID + * + * Use the FF-A driver to get the MM partition ID. + * If multiple partitions are found, use the first one. + * This is a boot time function. + * + * Return: + * + * 0 on success + */ +static int ffa_discover_mm_sp_id(void) +{ + u32 count = 0; + int ret; + struct ffa_partition_desc *descs; + struct udevice *dev; + + ret = uclass_first_device_err(UCLASS_FFA, &dev); + if (ret) { + log_err("EFI: Cannot find FF-A bus device, MM SP discovery failure\n"); + return ret; + } + + /* Ask the driver to fill the buffer with the SPs info */ + ret = ffa_partition_info_get(dev, mm_sp_svc_uuid, &count, &descs); + if (ret) { + log_err("EFI: Failure in querying SPs info (%d), MM SP discovery failure\n", ret); + return ret; + } + + /* MM SPs found , use the first one */ + + mm_sp_id = descs[0].info.id; + + log_info("EFI: MM partition ID 0x%x\n", mm_sp_id); + + return 0; +} + +/** + * ffa_mm_communicate() - Exchange EFI services data with the MM partition using FF-A + * @comm_buf: locally allocated communication buffer used for rx/tx + * @dsize: communication buffer size + * + * Issue a door bell event to notify the MM partition (SP) running in OP-TEE + * that there is data to read from the shared buffer. + * Communication with the MM SP is performed using FF-A transport. + * On the event, MM SP can read the data from the buffer and + * update the MM shared buffer with response data. + * The response data is copied back to the communication buffer. + * + * Return: + * + * EFI status code + */ +static efi_status_t ffa_mm_communicate(void *comm_buf, ulong comm_buf_size) +{ + ulong tx_data_size; + int ffa_ret; + efi_status_t efi_ret; + struct efi_mm_communicate_header *mm_hdr; + void *virt_shared_buf; + + if (!comm_buf) + return EFI_INVALID_PARAMETER; + + /* Discover MM partition ID at boot time */ + if (!mm_sp_id && ffa_discover_mm_sp_id()) { + log_err("EFI: Failure to discover MM SP ID at boot time, FF-A MM comms failure\n"); + return EFI_UNSUPPORTED; + } + + mm_hdr = (struct efi_mm_communicate_header *)comm_buf; + tx_data_size = mm_hdr->message_len + sizeof(efi_guid_t) + sizeof(size_t); + + if (comm_buf_size != tx_data_size || tx_data_size > CONFIG_FFA_SHARED_MM_BUF_SIZE) + return EFI_INVALID_PARAMETER; + + /* Copy the data to the shared buffer */ + + virt_shared_buf = map_sysmem((phys_addr_t)CONFIG_FFA_SHARED_MM_BUF_ADDR, 0); + memcpy(virt_shared_buf, comm_buf, tx_data_size); + + /* + * The secure world might have cache disabled for + * the device region used for shared buffer (which is the case for Optee). + * In this case, the secure world reads the data from DRAM. + * Let's flush the cache so the DRAM is updated with the latest data. + */ +#ifdef CONFIG_ARM64 + invalidate_dcache_all(); +#endif + + /* Announce there is data in the shared buffer */ + + ffa_ret = ffa_notify_mm_sp(); + + switch (ffa_ret) { + case 0: { + ulong rx_data_size; + /* Copy the MM SP response from the shared buffer to the communication buffer */ + rx_data_size = ((struct efi_mm_communicate_header *)virt_shared_buf)->message_len + + sizeof(efi_guid_t) + + sizeof(size_t); + + if (rx_data_size > comm_buf_size) { + efi_ret = EFI_OUT_OF_RESOURCES; + break; + } + + memcpy(comm_buf, virt_shared_buf, rx_data_size); + efi_ret = EFI_SUCCESS; + break; + } + case -EINVAL: + efi_ret = EFI_DEVICE_ERROR; + break; + case -EPERM: + efi_ret = EFI_INVALID_PARAMETER; + break; + case -EACCES: + efi_ret = EFI_ACCESS_DENIED; + break; + case -EBUSY: + efi_ret = EFI_OUT_OF_RESOURCES; + break; + default: + efi_ret = EFI_ACCESS_DENIED; + } + + unmap_sysmem(virt_shared_buf); + return efi_ret; +} + +/** + * get_mm_comms() - detect the available MM transport + * + * Make sure the FF-A bus is probed successfully + * which means FF-A communication with secure world works and ready + * for use. + * + * If FF-A bus is not ready, use OPTEE comms. + * + * Return: + * + * MM_COMMS_FFA or MM_COMMS_OPTEE + */ +static enum mm_comms_select get_mm_comms(void) +{ + struct udevice *dev; + int ret; + + ret = uclass_first_device_err(UCLASS_FFA, &dev); + if (ret) { + log_err("EFI: Cannot find FF-A bus device, trying Optee comms\n"); + return MM_COMMS_OPTEE; + } + + return MM_COMMS_FFA; +} + +/** + * mm_communicate() - Adjust the communication buffer to the MM SP and send * it to OP-TEE * - * @comm_buf: locally allocted communcation buffer + * @comm_buf: locally allocated communication buffer * @dsize: buffer size + * + * The SP (also called partition) can be any MM SP such as StandAlonneMM or smm-gateway. + * The comm_buf format is the same for both partitions. + * When using the u-boot OP-TEE driver, StandAlonneMM is supported. + * When using the u-boot FF-A driver, any MM SP is supported. + * * Return: status code */ static efi_status_t mm_communicate(u8 *comm_buf, efi_uintn_t dsize) { efi_status_t ret; + enum mm_comms_select mm_comms; struct efi_mm_communicate_header *mm_hdr; struct smm_variable_communicate_header *var_hdr; @@ -162,7 +404,12 @@ static efi_status_t mm_communicate(u8 *comm_buf, efi_uintn_t dsize) mm_hdr = (struct efi_mm_communicate_header *)comm_buf; var_hdr = (struct smm_variable_communicate_header *)mm_hdr->data; - ret = optee_mm_communicate(comm_buf, dsize); + mm_comms = get_mm_comms(); + if (mm_comms == MM_COMMS_FFA) + ret = ffa_mm_communicate(comm_buf, dsize); + else + ret = optee_mm_communicate(comm_buf, dsize); + if (ret != EFI_SUCCESS) { log_err("%s failed!\n", __func__); return ret; @@ -697,7 +944,7 @@ void efi_variables_boot_exit_notify(void) ret = EFI_NOT_FOUND; if (ret != EFI_SUCCESS) - log_err("Unable to notify StMM for ExitBootServices\n"); + log_err("Unable to notify the MM partition for ExitBootServices\n"); free(comm_buf); /* -- 2.39.5