From a99dab1d335f6dbaac7ac2cffba9b22a41c97dad Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:30 -0500 Subject: [PATCH] ppc: Remove Cyrus_P5020 and P5040 boards These boards have not been converted to CONFIG_DM_MMC by the deadline. Remove them. As the P5020 is the last ARCH_P5020 platform, remove that support as well. Cc: Andy Fleming Cc: Priyanka Jain Signed-off-by: Tom Rini Reviewed-by: Priyanka Jain --- arch/powerpc/cpu/mpc85xx/Kconfig | 44 +- arch/powerpc/cpu/mpc85xx/Makefile | 2 - arch/powerpc/cpu/mpc85xx/p5020_ids.c | 124 ------ arch/powerpc/cpu/mpc85xx/p5020_serdes.c | 134 ------ arch/powerpc/include/asm/config_mpc85xx.h | 18 - arch/powerpc/include/asm/fsl_secure_boot.h | 1 - arch/powerpc/include/asm/immap_85xx.h | 2 +- board/varisys/cyrus/Kconfig | 14 - board/varisys/cyrus/MAINTAINERS | 7 - board/varisys/cyrus/Makefile | 8 - board/varisys/cyrus/README | 19 - board/varisys/cyrus/cyrus.c | 117 ------ board/varisys/cyrus/cyrus.h | 9 - board/varisys/cyrus/ddr.c | 192 --------- board/varisys/cyrus/eth.c | 100 ----- board/varisys/cyrus/law.c | 26 -- board/varisys/cyrus/pbi.cfg | 35 -- board/varisys/cyrus/pci.c | 23 -- board/varisys/cyrus/rcw_p5020_v2.cfg | 11 - board/varisys/cyrus/rcw_p5040.cfg | 11 - board/varisys/cyrus/tlb.c | 105 ----- configs/Cyrus_P5020_defconfig | 48 --- configs/Cyrus_P5040_defconfig | 48 --- drivers/ddr/fsl/Kconfig | 1 - drivers/net/Kconfig | 1 - drivers/net/fm/Makefile | 1 - include/configs/cyrus.h | 458 --------------------- 27 files changed, 2 insertions(+), 1557 deletions(-) delete mode 100644 arch/powerpc/cpu/mpc85xx/p5020_ids.c delete mode 100644 arch/powerpc/cpu/mpc85xx/p5020_serdes.c delete mode 100644 board/varisys/cyrus/Kconfig delete mode 100644 board/varisys/cyrus/MAINTAINERS delete mode 100644 board/varisys/cyrus/Makefile delete mode 100644 board/varisys/cyrus/README delete mode 100644 board/varisys/cyrus/cyrus.c delete mode 100644 board/varisys/cyrus/cyrus.h delete mode 100644 board/varisys/cyrus/ddr.c delete mode 100644 board/varisys/cyrus/eth.c delete mode 100644 board/varisys/cyrus/law.c delete mode 100644 board/varisys/cyrus/pbi.cfg delete mode 100644 board/varisys/cyrus/pci.c delete mode 100644 board/varisys/cyrus/rcw_p5020_v2.cfg delete mode 100644 board/varisys/cyrus/rcw_p5040.cfg delete mode 100644 board/varisys/cyrus/tlb.c delete mode 100644 configs/Cyrus_P5020_defconfig delete mode 100644 configs/Cyrus_P5040_defconfig delete mode 100644 include/configs/cyrus.h diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 4f6915e1b3..06a20c881d 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -254,18 +254,6 @@ config TARGET_UCP1020 imply CMD_SATA imply PANIC_HANG -config TARGET_CYRUS_P5020 - bool "Support Varisys Cyrus P5020" - select ARCH_P5020 - select PHYS_64BIT - imply PANIC_HANG - -config TARGET_CYRUS_P5040 - bool "Support Varisys Cyrus P5040" - select ARCH_P5040 - select PHYS_64BIT - imply PANIC_HANG - endchoice config ARCH_B4420 @@ -727,31 +715,6 @@ config ARCH_P4080 imply CMD_REGINFO imply SATA_SIL -config ARCH_P5020 - bool - select E500MC - select FSL_LAW - select SYS_FSL_DDR_VER_44 - select SYS_FSL_ERRATUM_A004510 - select SYS_FSL_ERRATUM_A005275 - select SYS_FSL_ERRATUM_A006261 - select SYS_FSL_ERRATUM_DDR_A003 - select SYS_FSL_ERRATUM_DDR_A003474 - select SYS_FSL_ERRATUM_ESDHC111 - select SYS_FSL_ERRATUM_I2C_A004447 - select SYS_FSL_ERRATUM_SRIO_A004034 - select SYS_FSL_ERRATUM_USB14 - select SYS_FSL_HAS_DDR3 - select SYS_FSL_HAS_SEC - select SYS_FSL_QORIQ_CHASSIS1 - select SYS_FSL_SEC_BE - select SYS_FSL_SEC_COMPAT_4 - select SYS_PPC64 - select FSL_ELBC - imply CMD_SATA - imply CMD_REGINFO - imply FSL_SATA - config ARCH_P5040 bool select E500MC @@ -1010,7 +973,6 @@ config MAX_CPUS ARCH_P1024 || \ ARCH_P1025 || \ ARCH_P2020 || \ - ARCH_P5020 || \ ARCH_T1023 || \ ARCH_T1024 default 1 @@ -1048,7 +1010,6 @@ config SYS_CCSRBAR_DEFAULT ARCH_P2041 || \ ARCH_P3041 || \ ARCH_P4080 || \ - ARCH_P5020 || \ ARCH_P5040 || \ ARCH_T1023 || \ ARCH_T1024 || \ @@ -1168,7 +1129,7 @@ config SYS_FSL_A004447_SVR_REV default 0x00 if ARCH_MPC8548 default 0x10 if ARCH_P1010 default 0x11 if ARCH_P1023 || ARCH_P2041 || ARCH_BSC9132 - default 0x20 if ARCH_P3041 || ARCH_P4080 || ARCH_P5020 + default 0x20 if ARCH_P3041 || ARCH_P4080 config SYS_FSL_ERRATUM_IFC_A002769 bool @@ -1238,7 +1199,6 @@ config SYS_FSL_NUM_LAWS ARCH_P2041 || \ ARCH_P3041 || \ ARCH_P4080 || \ - ARCH_P5020 || \ ARCH_P5040 || \ ARCH_T2080 || \ ARCH_T4160 || \ @@ -1345,7 +1305,6 @@ config SYS_FSL_LBC_CLK_DIV default 2 if ARCH_P2041 || \ ARCH_P3041 || \ ARCH_P4080 || \ - ARCH_P5020 || \ ARCH_P5040 default 1 @@ -1373,7 +1332,6 @@ source "board/freescale/t4rdb/Kconfig" source "board/keymile/Kconfig" source "board/sbc8548/Kconfig" source "board/socrates/Kconfig" -source "board/varisys/cyrus/Kconfig" source "board/xes/xpedite520x/Kconfig" source "board/xes/xpedite537x/Kconfig" source "board/xes/xpedite550x/Kconfig" diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index ed13d5cb56..b9d87ddb65 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -40,7 +40,6 @@ obj-$(CONFIG_SYS_DPAA_QBMAN) += portals.o obj-$(CONFIG_ARCH_P2041) += p2041_ids.o obj-$(CONFIG_ARCH_P3041) += p3041_ids.o obj-$(CONFIG_ARCH_P4080) += p4080_ids.o -obj-$(CONFIG_ARCH_P5020) += p5020_ids.o obj-$(CONFIG_ARCH_P5040) += p5040_ids.o obj-$(CONFIG_ARCH_T4240) += t4240_ids.o obj-$(CONFIG_ARCH_T4160) += t4240_ids.o @@ -76,7 +75,6 @@ obj-$(CONFIG_ARCH_P2020) += p2020_serdes.o obj-$(CONFIG_ARCH_P2041) += p2041_serdes.o obj-$(CONFIG_ARCH_P3041) += p3041_serdes.o obj-$(CONFIG_ARCH_P4080) += p4080_serdes.o -obj-$(CONFIG_ARCH_P5020) += p5020_serdes.o obj-$(CONFIG_ARCH_P5040) += p5040_serdes.o obj-$(CONFIG_ARCH_T4240) += t4240_serdes.o obj-$(CONFIG_ARCH_T4160) += t4240_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/p5020_ids.c b/arch/powerpc/cpu/mpc85xx/p5020_ids.c deleted file mode 100644 index 575b604c21..0000000000 --- a/arch/powerpc/cpu/mpc85xx/p5020_ids.c +++ /dev/null @@ -1,124 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010-2011 Freescale Semiconductor, Inc. - */ - -#include -#include -#include - -#ifdef CONFIG_SYS_DPAA_QBMAN -struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { - /* dqrr liodn, frame data liodn, liodn off, sdest */ - SET_QP_INFO(1, 2, 1, 0), - SET_QP_INFO(3, 4, 2, 1), - SET_QP_INFO(5, 6, 3, 0), - SET_QP_INFO(7, 8, 4, 1), - SET_QP_INFO(9, 10, 5, 0), - SET_QP_INFO(11, 12, 6, 1), - SET_QP_INFO(13, 14, 7, 0), - SET_QP_INFO(15, 16, 8, 1), - SET_QP_INFO(17, 18, 9, 0), - SET_QP_INFO(19, 20, 10, 1), -}; -#endif - -struct srio_liodn_id_table srio_liodn_tbl[] = { - SET_SRIO_LIODN_2(1, 199, 200), - SET_SRIO_LIODN_2(2, 201, 202), -}; -int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); - -struct liodn_id_table liodn_tbl[] = { -#ifdef CONFIG_SYS_DPAA_QBMAN - SET_QMAN_LIODN(31), - SET_BMAN_LIODN(32), -#endif - - SET_SDHC_LIODN(1, 64), - - SET_PME_LIODN(117), - - SET_USB_LIODN(1, "fsl-usb2-mph", 125), - SET_USB_LIODN(2, "fsl-usb2-dr", 126), - - SET_SATA_LIODN(1, 127), - SET_SATA_LIODN(2, 128), - - SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 193), - SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 194), - SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 195), - SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 196), - - SET_DMA_LIODN(1, "fsl,eloplus-dma", 197), - SET_DMA_LIODN(2, "fsl,eloplus-dma", 198), - - SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), - SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), - SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), - SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), -}; -int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); - -#ifdef CONFIG_SYS_DPAA_FMAN -struct fman_liodn_id_table fman1_liodn_tbl[] = { - SET_FMAN_RX_1G_LIODN(1, 0, 10), - SET_FMAN_RX_1G_LIODN(1, 1, 11), - SET_FMAN_RX_1G_LIODN(1, 2, 12), - SET_FMAN_RX_1G_LIODN(1, 3, 13), - SET_FMAN_RX_1G_LIODN(1, 4, 14), - SET_FMAN_RX_10G_LIODN(1, 0, 15), -}; -int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); -#endif - -struct liodn_id_table sec_liodn_tbl[] = { - SET_SEC_JR_LIODN_ENTRY(0, 129, 130), - SET_SEC_JR_LIODN_ENTRY(1, 131, 132), - SET_SEC_JR_LIODN_ENTRY(2, 133, 134), - SET_SEC_JR_LIODN_ENTRY(3, 135, 136), - SET_SEC_RTIC_LIODN_ENTRY(a, 154), - SET_SEC_RTIC_LIODN_ENTRY(b, 155), - SET_SEC_RTIC_LIODN_ENTRY(c, 156), - SET_SEC_RTIC_LIODN_ENTRY(d, 157), - SET_SEC_DECO_LIODN_ENTRY(0, 97, 98), - SET_SEC_DECO_LIODN_ENTRY(1, 99, 100), -}; -int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); - -#ifdef CONFIG_SYS_FSL_RAID_ENGINE -struct liodn_id_table raide_liodn_tbl[] = { - SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60), - SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61), - SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62), - SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63), -}; -int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl); -#endif - -#ifdef CONFIG_SYS_DPAA_RMAN -struct liodn_id_table rman_liodn_tbl[] = { - /* Set RMan block 0-3 liodn offset */ - SET_RMAN_LIODN(0, 6), - SET_RMAN_LIODN(1, 7), - SET_RMAN_LIODN(2, 8), - SET_RMAN_LIODN(3, 9), -}; -int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); -#endif - -struct liodn_id_table liodn_bases[] = { - [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(64, 100), -#ifdef CONFIG_SYS_DPAA_FMAN - [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32), -#endif -#ifdef CONFIG_SYS_DPAA_PME - [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(136, 172), -#endif -#ifdef CONFIG_SYS_FSL_RAID_ENGINE - [FSL_HW_PORTAL_RAID_ENGINE] = SET_LIODN_BASE_1(47), -#endif -#ifdef CONFIG_SYS_DPAA_RMAN - [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(80), -#endif -}; diff --git a/arch/powerpc/cpu/mpc85xx/p5020_serdes.c b/arch/powerpc/cpu/mpc85xx/p5020_serdes.c deleted file mode 100644 index ec8234c1c1..0000000000 --- a/arch/powerpc/cpu/mpc85xx/p5020_serdes.c +++ /dev/null @@ -1,134 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include "fsl_corenet_serdes.h" - -static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { - [0x2] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, - PCIE4, AURORA, PCIE3, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, - SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, }, - [0x4] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, - PCIE2, AURORA, PCIE3, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, - SGMII_FM1_DTSEC4, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, }, - [0xb] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO2, SRIO2, SRIO1, SRIO1, - PCIE2, AURORA, PCIE3, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, - SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, }, - [0x10] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x11] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, }, - [0x13] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM1, XAUI_FM1, - XAUI_FM1, XAUI_FM1, }, - [0x14] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, PCIE3, PCIE3, PCIE3, PCIE3, - SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, - SGMII_FM1_DTSEC4, }, - [0x15] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x16] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SRIO1, SRIO1, SRIO1, - SRIO1, }, - [0x17] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, }, - [0x18] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, NONE, - NONE, NONE, }, - [0x1b] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x1d] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, PCIE3, PCIE3, PCIE3, PCIE3, NONE, NONE, - SATA1, SATA2, }, - [0x20] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM1, XAUI_FM1, - XAUI_FM1, XAUI_FM1, }, - [0x21] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, PCIE3, PCIE3, PCIE3, PCIE3, - SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, - SGMII_FM1_DTSEC4, }, - [0x22] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x23] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO2, SRIO2, SRIO1, SRIO1, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, }, - [0x24] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO2, SRIO2, SRIO1, SRIO1, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, NONE, - NONE, NONE, }, - [0x28] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, }, - [0x29] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, NONE, - NONE, NONE, }, - [0x2a] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM1, XAUI_FM1, - XAUI_FM1, XAUI_FM1, }, - [0x2b] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x2f] = {PCIE1, PCIE1, PCIE3, PCIE3, SRIO2, SRIO2, SRIO1, SRIO1, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x31] = {PCIE1, PCIE1, PCIE3, PCIE3, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, NONE, - NONE, NONE, }, - [0x33] = {PCIE1, PCIE1, PCIE3, PCIE3, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x34] = {PCIE1, PCIE1, PCIE1, PCIE1, SGMII_FM1_DTSEC1, - SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, - AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, - NONE, SATA1, SATA2, }, - [0x35] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, AURORA, XAUI_FM1, - XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, NONE, SATA1, SATA2, }, - [0x36] = {PCIE1, PCIE1, PCIE3, PCIE3, SGMII_FM1_DTSEC1, - SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, - AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, - NONE, SATA1, SATA2, }, - [0x37] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, AURORA, XAUI_FM1, - XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, NONE, SATA1, SATA2, }, -}; - -enum srds_prtcl serdes_get_prtcl(int cfg, int lane) -{ - if (!serdes_lane_enabled(lane)) - return NONE; - - return serdes_cfg_tbl[cfg][lane]; -} - -int is_serdes_prtcl_valid(u32 prtcl) { - int i; - - if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl)) - return 0; - - for (i = 0; i < SRDS_MAX_LANES; i++) { - if (serdes_cfg_tbl[prtcl][i] != NONE) - return 1; - } - - return 0; -} diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 8487d1aef6..2053548731 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -153,24 +153,6 @@ #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000 -#elif defined(CONFIG_ARCH_P5020) /* also supports P5010 */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ -#define CONFIG_SYS_FSL_NUM_CC_PLLS 2 -#define CONFIG_SYS_NUM_FMAN 1 -#define CONFIG_SYS_NUM_FM1_DTSEC 5 -#define CONFIG_SYS_NUM_FM1_10GEC 1 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 -#define CONFIG_SYS_FSL_TBCLK_DIV 32 -#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" -#define CONFIG_SYS_FSL_USB1_PHY_ENABLE -#define CONFIG_SYS_FSL_USB2_PHY_ENABLE -#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY -#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 -#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 -#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 -#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000 - #elif defined(CONFIG_ARCH_P5040) #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_SYS_FSL_NUM_CC_PLLS 3 diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index 25db9f2948..6499e10ef4 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -57,7 +57,6 @@ #if defined(CONFIG_ARCH_P3041) || \ defined(CONFIG_ARCH_P4080) || \ - defined(CONFIG_ARCH_P5020) || \ defined(CONFIG_ARCH_P5040) || \ defined(CONFIG_ARCH_P2041) #define CONFIG_FSL_TRUST_ARCH_v1 diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 4549d04e44..59bc32fd17 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1853,7 +1853,7 @@ typedef struct ccsr_gur { #define FSL_CORENET_RCWSR11_EC2_USB2 0x00100000 #endif #if defined(CONFIG_ARCH_P2041) || \ - defined(CONFIG_ARCH_P3041) || defined(CONFIG_ARCH_P5020) + defined(CONFIG_ARCH_P3041) #define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_RGMII 0x00000000 #define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_MII 0x00800000 #define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_NONE 0x00c00000 diff --git a/board/varisys/cyrus/Kconfig b/board/varisys/cyrus/Kconfig deleted file mode 100644 index a0389f8fa1..0000000000 --- a/board/varisys/cyrus/Kconfig +++ /dev/null @@ -1,14 +0,0 @@ -if TARGET_CYRUS_P5020 || TARGET_CYRUS_P5040 - -config SYS_BOARD - default "cyrus" - -config SYS_VENDOR - default "varisys" - -config SYS_CONFIG_NAME - default "cyrus" - -source "board/freescale/common/Kconfig" - -endif diff --git a/board/varisys/cyrus/MAINTAINERS b/board/varisys/cyrus/MAINTAINERS deleted file mode 100644 index 53b4a886bd..0000000000 --- a/board/varisys/cyrus/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -Cyrus BOARD -M: Andy Fleming -S: Maintained -F: board/varisys/cyrus/ -F: include/configs/cyrus.h -F: configs/Cyrus_P5020_defconfig -F: configs/Cyrus_P5040_defconfig diff --git a/board/varisys/cyrus/Makefile b/board/varisys/cyrus/Makefile deleted file mode 100644 index 15b3fb2964..0000000000 --- a/board/varisys/cyrus/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ - -obj-y += $(BOARD).o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o -obj-y += eth.o -obj-$(CONFIG_PCI) += pci.o diff --git a/board/varisys/cyrus/README b/board/varisys/cyrus/README deleted file mode 100644 index 9595dcb7cc..0000000000 --- a/board/varisys/cyrus/README +++ /dev/null @@ -1,19 +0,0 @@ -Rebuilding u-boot for Cyrus - -The Cyrus defconfigs are Cyrus_P5020_defconfig and Cyrus_P5040_defconfig. - -They currently disable size optimization in order to avoid a relocation -bug in some versions of GCC. As the output size is a constant, the size -optimization is not currently important. - -Cyrus boots off a microSD card in a slot on the motherboard. This requires -that the u-boot is built for the Pre-Boot Loader on the P5020/P5040. -In order to reflash u-boot, you must download u-boot.pbl, then write it -onto the card. To do that from u-boot: - -> tftp 1000000 u-boot.pbl -> mmc write 1000000 8 672 - -If you want to do this via a card reader in linux: - -> dd if=u-boot.pbl of=/dev/sdX bs=512 oseek=8 diff --git a/board/varisys/cyrus/cyrus.c b/board/varisys/cyrus/cyrus.c deleted file mode 100644 index c5d34df777..0000000000 --- a/board/varisys/cyrus/cyrus.c +++ /dev/null @@ -1,117 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Based on corenet_ds.c - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "cyrus.h" -#include "../common/eeprom.h" - -#define GPIO_OPENDRAIN 0x30000000 -#define GPIO_DIR 0x3c000004 -#define GPIO_INITIAL 0x30000000 -#define GPIO_VGA_SWITCH 0x00001000 - -int checkboard(void) -{ - printf("Board: CYRUS\n"); - - return 0; -} - -int board_early_init_f(void) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - - /* - * Only use DDR1_MCK0/3 and DDR2_MCK0/3 - * disable DDR1_MCK1/2/4/5 and DDR2_MCK1/2/4/5 to reduce - * the noise introduced by these unterminated and unused clock pairs. - */ - setbits_be32(&gur->ddrclkdr, 0x001B001B); - - /* Set GPIO reset lines to open-drain, tristate */ - setbits_be32(&pgpio->gpdat, GPIO_INITIAL); - setbits_be32(&pgpio->gpodr, GPIO_OPENDRAIN); - - /* Set GPIO Direction */ - setbits_be32(&pgpio->gpdir, GPIO_DIR); - - return 0; -} - -int board_early_init_r(void) -{ - fsl_lbc_t *lbc = LBC_BASE_ADDR; - - out_be32(&lbc->lbcr, 0); - /* 1 clock LALE cycle */ - out_be32(&lbc->lcrr, 0x80000000 | CONFIG_SYS_LBC_LCRR); - - set_liodns(); - -#ifdef CONFIG_SYS_DPAA_QBMAN - setup_qbman_portals(); -#endif - print_lbc_regs(); - return 0; -} - -int misc_init_r(void) -{ - return 0; -} - -int ft_board_setup(void *blob, struct bd_info *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = env_get_bootm_low(); - size = env_get_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#ifdef CONFIG_PCI - pci_of_setup(blob, bd); -#endif - - fdt_fixup_liodn(blob); - fsl_fdt_fixup_dr_usb(blob, bd); - -#ifdef CONFIG_SYS_DPAA_FMAN - fdt_fixup_fman_ethernet(blob); -#endif - - return 0; -} - -int mac_read_from_eeprom(void) -{ - init_eeprom(CONFIG_SYS_EEPROM_BUS_NUM, - CONFIG_SYS_I2C_EEPROM_ADDR, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN); - - return mac_read_from_eeprom_common(); -} diff --git a/board/varisys/cyrus/cyrus.h b/board/varisys/cyrus/cyrus.h deleted file mode 100644 index d8f8d6c8ec..0000000000 --- a/board/varisys/cyrus/cyrus.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ - -#ifndef __CYRUS_H -#define __CYRUS_H - -void fdt_fixup_board_enet(void *blob); -void pci_of_setup(void *blob, struct bd_info *bd); - -#endif diff --git a/board/varisys/cyrus/ddr.c b/board/varisys/cyrus/ddr.c deleted file mode 100644 index 184948094d..0000000000 --- a/board/varisys/cyrus/ddr.c +++ /dev/null @@ -1,192 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Based on corenet_ds ddr code - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - - -struct board_specific_parameters { - u32 n_ranks; - u32 datarate_mhz_high; - u32 clk_adjust; - u32 wrlvl_start; - u32 cpo; - u32 write_data_delay; - u32 force_2t; -}; - -/* - * This table contains all valid speeds we want to override with board - * specific parameters. datarate_mhz_high values need to be in ascending order - * for each n_ranks group. - */ -static const struct board_specific_parameters udimm0[] = { - /* - * memory controller 0 - * num| hi| clk| wrlvl | cpo |wrdata|2T - * ranks| mhz|adjst| start | |delay | - */ - {4, 850, 4, 6, 0xff, 2, 0}, - {4, 950, 5, 7, 0xff, 2, 0}, - {4, 1050, 5, 8, 0xff, 2, 0}, - {4, 1250, 5, 10, 0xff, 2, 0}, - {4, 1350, 5, 11, 0xff, 2, 0}, - {4, 1666, 5, 12, 0xff, 2, 0}, - {2, 850, 5, 6, 0xff, 2, 0}, - {2, 1050, 5, 7, 0xff, 2, 0}, - {2, 1250, 4, 6, 0xff, 2, 0}, - {2, 1350, 5, 7, 0xff, 2, 0}, - {2, 1666, 5, 8, 0xff, 2, 0}, - {1, 1250, 4, 6, 0xff, 2, 0}, - {1, 1335, 4, 7, 0xff, 2, 0}, - {1, 1666, 4, 8, 0xff, 2, 0}, - {} -}; - -/* - * The two slots have slightly different timing. The center values are good - * for both slots. We use identical speed tables for them. In future use, if - * DIMMs have fewer center values that require two separated tables, copy the - * udimm0 table to udimm1 and make changes to clk_adjust and wrlvl_start. - */ -static const struct board_specific_parameters *udimms[] = { - udimm0, - udimm0, -}; - -static const struct board_specific_parameters rdimm0[] = { - /* - * memory controller 0 - * num| hi| clk| wrlvl | cpo |wrdata|2T - * ranks| mhz|adjst| start | |delay | - */ - {4, 850, 4, 6, 0xff, 2, 0}, - {4, 950, 5, 7, 0xff, 2, 0}, - {4, 1050, 5, 8, 0xff, 2, 0}, - {4, 1250, 5, 10, 0xff, 2, 0}, - {4, 1350, 5, 11, 0xff, 2, 0}, - {4, 1666, 5, 12, 0xff, 2, 0}, - {2, 850, 4, 6, 0xff, 2, 0}, - {2, 1050, 4, 7, 0xff, 2, 0}, - {2, 1666, 4, 8, 0xff, 2, 0}, - {1, 850, 4, 5, 0xff, 2, 0}, - {1, 950, 4, 7, 0xff, 2, 0}, - {1, 1666, 4, 8, 0xff, 2, 0}, - {} -}; - -/* - * The two slots have slightly different timing. See comments above. - */ -static const struct board_specific_parameters *rdimms[] = { - rdimm0, - rdimm0, -}; - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; - ulong ddr_freq; - - if (ctrl_num > 1) { - printf("Wrong parameter for controller number %d", ctrl_num); - return; - } - if (!pdimm->n_ranks) - return; - - if (popts->registered_dimm_en) - pbsp = rdimms[ctrl_num]; - else - pbsp = udimms[ctrl_num]; - - - /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr - * freqency and n_banks specified in board_specific_parameters table. - */ - ddr_freq = get_ddr_freq(0) / 1000000; - while (pbsp->datarate_mhz_high) { - if (pbsp->n_ranks == pdimm->n_ranks) { - if (ddr_freq <= pbsp->datarate_mhz_high) { - popts->cpo_override = pbsp->cpo; - popts->write_data_delay = - pbsp->write_data_delay; - popts->clk_adjust = pbsp->clk_adjust; - popts->wrlvl_start = pbsp->wrlvl_start; - popts->twot_en = pbsp->force_2t; - goto found; - } - pbsp_highest = pbsp; - } - pbsp++; - } - - if (pbsp_highest) { - printf("Error: board specific timing not found for data rate %lu MT/s!\nTrying to use the highest speed (%u) parameters\n", - ddr_freq, pbsp_highest->datarate_mhz_high); - popts->cpo_override = pbsp_highest->cpo; - popts->write_data_delay = pbsp_highest->write_data_delay; - popts->clk_adjust = pbsp_highest->clk_adjust; - popts->wrlvl_start = pbsp_highest->wrlvl_start; - popts->twot_en = pbsp_highest->force_2t; - } else { - panic("DIMM is not supported by this board"); - } -found: - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; - /* - * Write leveling override - */ - popts->wrlvl_override = 1; - popts->wrlvl_sample = 0xf; - - /* - * Rtt and Rtt_WR override - */ - popts->rtt_override = 0; - - /* Enable ZQ calibration */ - popts->zq_en = 1; - - /* DHC_EN =1, ODT = 60 Ohm */ - popts->ddr_cdr1 = DDR_CDR1_DHC_EN; -} - -int dram_init(void) -{ - phys_size_t dram_size; - - puts("Initializing...."); - - if (!fsl_use_spd()) - panic("Cyrus only supports using SPD for DRAM\n"); - - puts("using SPD\n"); - dram_size = fsl_ddr_sdram(); - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - debug(" DDR: "); - gd->ram_size = dram_size; - - return 0; -} diff --git a/board/varisys/cyrus/eth.c b/board/varisys/cyrus/eth.c deleted file mode 100644 index bc681079e2..0000000000 --- a/board/varisys/cyrus/eth.c +++ /dev/null @@ -1,100 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Author Adrian Cox - * Based somewhat on board/freescale/corenet_ds/eth_hydra.c - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_FMAN_ENET - -#define FIRST_PORT_ADDR 3 -#define SECOND_PORT_ADDR 7 - -#ifdef CONFIG_ARCH_P5040 -#define FIRST_PORT FM1_DTSEC5 -#define SECOND_PORT FM2_DTSEC5 -#else -#define FIRST_PORT FM1_DTSEC4 -#define SECOND_PORT FM1_DTSEC5 -#endif - -#define IS_VALID_PORT(p) ((p) == FIRST_PORT || (p) == SECOND_PORT) - -static void cyrus_phy_tuning(int phy) -{ - /* - * Enable RGMII delay on Tx and Rx for CPU port - */ - printf("Tuning PHY @ %d\n", phy); - - /* sets address 0x104 or reg 260 for writing */ - miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0xb, 0x8104); - /* Sets RXC/TXC to +0.96ns and TX_CTL/RX_CTL to -0.84ns */ - miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0xc, 0xf0f0); - /* sets address 0x105 or reg 261 for writing */ - miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0xb, 0x8105); - /* writes to address 0x105 , RXD[3..0] to -0. */ - miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0xc, 0x0000); - /* sets address 0x106 or reg 261 for writing */ - miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0xb, 0x8106); - /* writes to address 0x106 , TXD[3..0] to -0.84ns */ - miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0xc, 0x0000); - /* force re-negotiation */ - miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0x0, 0x1340); -} -#endif - -int board_eth_init(struct bd_info *bis) -{ -#ifdef CONFIG_FMAN_ENET - struct fsl_pq_mdio_info dtsec_mdio_info; - unsigned int i; - - printf("Initializing Fman\n"); - - - /* Register the real 1G MDIO bus */ - dtsec_mdio_info.regs = - (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; - dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; - - fsl_pq_mdio_init(bis, &dtsec_mdio_info); - - - fm_info_set_phy_address(FIRST_PORT, FIRST_PORT_ADDR); - fm_info_set_mdio(FIRST_PORT, - miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); - fm_info_set_phy_address(SECOND_PORT, SECOND_PORT_ADDR); - fm_info_set_mdio(SECOND_PORT, - miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); - - /* Never disable DTSEC1 - it controls MDIO */ - for (i = FM1_DTSEC2; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { - if (!IS_VALID_PORT(i)) - fm_disable_port(i); - } - -#ifdef CONFIG_ARCH_P5040 - for (i = FM2_DTSEC2; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { - if (!IS_VALID_PORT(i)) - fm_disable_port(i); - } -#endif - - cpu_eth_init(bis); - - cyrus_phy_tuning(FIRST_PORT_ADDR); - cyrus_phy_tuning(SECOND_PORT_ADDR); -#endif - - return pci_eth_init(bis); -} diff --git a/board/varisys/cyrus/law.c b/board/varisys/cyrus/law.c deleted file mode 100644 index 8b1b118b55..0000000000 --- a/board/varisys/cyrus/law.c +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Author: Adrian Cox - * Based on corenet_ds law files. - */ - -#include -#include -#include - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_LBC0_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_LBC1_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_BMAN), -#endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_QMAN), -#endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS - /* Limit DCSR to 32M to access NPC Trace Buffer */ - SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), -#endif -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/varisys/cyrus/pbi.cfg b/board/varisys/cyrus/pbi.cfg deleted file mode 100644 index 9b330ddcc4..0000000000 --- a/board/varisys/cyrus/pbi.cfg +++ /dev/null @@ -1,35 +0,0 @@ -# -# Copyright 2012 Freescale Semiconductor, Inc. -# -# Refer docs/README.pblimage for more details about how-to configure -# and create PBL boot image -# -# SPDX-License-Identifier: GPL-2.0+ -# - -#PBI commands -#Initialize CPC1 as 1MB SRAM -09010000 00200400 -09138000 00000000 -091380c0 00000100 -09010100 00000000 -09010104 fff0000b -09010f00 08000000 -09010000 80000000 -#Configure LAW for CPC1 -09000d00 00000000 -09000d04 fff00000 -09000d08 81000013 -09000010 00000000 -09000014 ff000000 -09000018 81000000 -#Initialize eSPI controller, default configuration is slow for eSPI to -#load data, this configuration comes from u-boot eSPI driver. -09110000 80000403 -09110020 2d170008 -09110024 00100008 -09110028 00100008 -0911002c 00100008 -#Flush PBL data -09138000 00000000 -091380c0 00000000 diff --git a/board/varisys/cyrus/pci.c b/board/varisys/cyrus/pci.c deleted file mode 100644 index 429c398cb4..0000000000 --- a/board/varisys/cyrus/pci.c +++ /dev/null @@ -1,23 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2007-2011 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} - -void pci_of_setup(void *blob, struct bd_info *bd) -{ - FT_FSL_PCI_SETUP; -} diff --git a/board/varisys/cyrus/rcw_p5020_v2.cfg b/board/varisys/cyrus/rcw_p5020_v2.cfg deleted file mode 100644 index 9188080605..0000000000 --- a/board/varisys/cyrus/rcw_p5020_v2.cfg +++ /dev/null @@ -1,11 +0,0 @@ -# -# Default RCW for Cyrus P5020 -# - -#PBL preamble and RCW header -aa55aa55 010e0100 -#64 bytes RCW data -0c540000 00000000 1e1e0000 00000000 -44808c00 ff002000 68000000 45000000 -00000000 00000000 00000000 0003000f -a0000000 00000000 00000000 00000000 diff --git a/board/varisys/cyrus/rcw_p5040.cfg b/board/varisys/cyrus/rcw_p5040.cfg deleted file mode 100644 index 5284481568..0000000000 --- a/board/varisys/cyrus/rcw_p5040.cfg +++ /dev/null @@ -1,11 +0,0 @@ -# -# Default RCW for Cyrus P5040 -# - -#PBL preamble and RCW header -aa55aa55 010e0100 -#64 bytes RCW data -90e00000 00000000 acac9800 00440000 -44808c00 ff29a000 68000000 61000000 -00000000 00000000 00000000 0003000f -a0000000 00000000 00000000 00000000 diff --git a/board/varisys/cyrus/tlb.c b/board/varisys/cyrus/tlb.c deleted file mode 100644 index b1af3e04d6..0000000000 --- a/board/varisys/cyrus/tlb.c +++ /dev/null @@ -1,105 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Author: Adrian Cox - * Based on corenet_ds tlb code - */ - -#include -#include - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, - CONFIG_SYS_INIT_RAM_ADDR_PHYS, - MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, - MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, - MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, - MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Covers boot page */ -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) - /* - * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the - * SRAM is at 0xfff00000, it covered the 0xfffff000. - */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_1M, 1), -#else - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_4K, 1), -#endif - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_16M, 1), - - /* Local Bus */ - SET_TLB_ENTRY(1, CONFIG_SYS_LBC0_BASE, CONFIG_SYS_LBC0_BASE_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_64K, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_LBC1_BASE, CONFIG_SYS_LBC1_BASE_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_4K, 1), - - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_1G, 1), - - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000, - CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000, - CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI I/O */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_256K, 1), - - /* Bman/Qman */ -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, - MAS3_SW|MAS3_SR, 0, - 0, 9, BOOKE_PAGESZ_1M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000, - CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 10, BOOKE_PAGESZ_1M, 1), -#endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, - MAS3_SW|MAS3_SR, 0, - 0, 11, BOOKE_PAGESZ_1M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000, - CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 12, BOOKE_PAGESZ_1M, 1), -#endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 13, BOOKE_PAGESZ_4M, 1), -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/Cyrus_P5020_defconfig b/configs/Cyrus_P5020_defconfig deleted file mode 100644 index a488ad8fb5..0000000000 --- a/configs/Cyrus_P5020_defconfig +++ /dev/null @@ -1,48 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xCF400 -CONFIG_MPC85xx=y -CONFIG_TARGET_CYRUS_P5020=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL" -CONFIG_BOOTDELAY=10 -CONFIG_CONSOLE_MUX=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_ESDHC=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_MII=y -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_KEYBOARD=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 -CONFIG_OF_LIBFDT=y diff --git a/configs/Cyrus_P5040_defconfig b/configs/Cyrus_P5040_defconfig deleted file mode 100644 index 476d63bab2..0000000000 --- a/configs/Cyrus_P5040_defconfig +++ /dev/null @@ -1,48 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xCF400 -CONFIG_MPC85xx=y -CONFIG_TARGET_CYRUS_P5040=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL" -CONFIG_BOOTDELAY=10 -CONFIG_CONSOLE_MUX=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_ESDHC=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_MII=y -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_KEYBOARD=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 -CONFIG_OF_LIBFDT=y diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig index 5f62489a90..8b480dfd69 100644 --- a/drivers/ddr/fsl/Kconfig +++ b/drivers/ddr/fsl/Kconfig @@ -44,7 +44,6 @@ config SYS_NUM_DDR_CTLRS ARCH_MPC8572 || \ ARCH_MPC8641 || \ ARCH_P4080 || \ - ARCH_P5020 || \ ARCH_P5040 || \ ARCH_LX2160A || \ ARCH_LX2162A || \ diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2bb560bd56..54f7b81624 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -726,7 +726,6 @@ config SYS_DPAA_QBMAN ARCH_P4080 || \ ARCH_P3041 || \ ARCH_P5040 || \ - ARCH_P5020 || \ ARCH_LS1043A || \ ARCH_LS1046A help diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index c6c1440a20..b4ede61113 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_ARCH_P1023) += p1023.o obj-$(CONFIG_ARCH_P2041) += p5020.o obj-$(CONFIG_ARCH_P3041) += p5020.o obj-$(CONFIG_ARCH_P4080) += p4080.o -obj-$(CONFIG_ARCH_P5020) += p5020.o obj-$(CONFIG_ARCH_P5040) += p5040.o obj-$(CONFIG_ARCH_T1040) += t1040.o obj-$(CONFIG_ARCH_T1042) += t1040.o diff --git a/include/configs/cyrus.h b/include/configs/cyrus.h deleted file mode 100644 index 9a8735f850..0000000000 --- a/include/configs/cyrus.h +++ /dev/null @@ -1,458 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Based on corenet_ds.h - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -#if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040) -#error Must call Cyrus CONFIG with a specific CPU enabled. -#endif - -#define CONFIG_SDCARD -#define CONFIG_FSL_SATA_V2 -#define CONFIG_PCIE3 -#define CONFIG_PCIE4 -#ifdef CONFIG_ARCH_P5020 -#define CONFIG_SYS_FSL_RAID_ENGINE -#define CONFIG_SYS_DPAA_RMAN -#endif -#define CONFIG_SYS_DPAA_PME - -/* - * Corenet DS style board configuration file - */ -#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg -#if defined(CONFIG_ARCH_P5020) -#define CONFIG_SYS_CLK_FREQ 133000000 -#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg -#elif defined(CONFIG_ARCH_P5040) -#define CONFIG_SYS_CLK_FREQ 100000000 -#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg -#endif - -/* High Level Configuration Options */ -#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ - -#define CONFIG_SYS_MMC_MAX_DEVICE 1 - -#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ -#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS -#define CONFIG_PCIE1 /* PCIE controller 1 */ -#define CONFIG_PCIE2 /* PCIE controller 2 */ -#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - -#if defined(CONFIG_SDCARD) -#define CONFIG_FSL_FIXED_MMC_LOCATION -#endif - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_SYS_CACHE_STASHING -#define CONFIG_BACKSIDE_L2_CACHE -#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_DDR_ECC -#ifdef CONFIG_DDR_ECC -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - -#define CONFIG_ENABLE_36BIT_PHYS - -/* test POST memory test */ -#undef CONFIG_POST - -/* - * Config the L3 Cache as L3 SRAM - */ -#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) -#else -#define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR -#endif -#define CONFIG_SYS_L3_SIZE (1024 << 10) -#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_DCSRBAR 0xf0000000 -#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull -#endif - -/* - * DDR Setup - */ -#define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) - -#define CONFIG_DDR_SPD - -#define CONFIG_SYS_SPD_BUS_NUM 1 -#define SPD_EEPROM_ADDRESS1 0x51 -#define SPD_EEPROM_ADDRESS2 0x52 -#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ - -/* - * Local Bus Definitions - */ - -#define CONFIG_SYS_LBC0_BASE 0xe0000000 /* Start of LBC Registers */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_LBC0_BASE_PHYS 0xfe0000000ull -#else -#define CONFIG_SYS_LBC0_BASE_PHYS CONFIG_SYS_LBC0_BASE -#endif - -#define CONFIG_SYS_LBC1_BASE 0xe1000000 /* Start of LBC Registers */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_LBC1_BASE_PHYS 0xfe1000000ull -#else -#define CONFIG_SYS_LBC1_BASE_PHYS CONFIG_SYS_LBC1_BASE -#endif - -/* Set the local bus clock 1/16 of platform clock */ -#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_16 | LCRR_EADC_1) - -#define CONFIG_SYS_BR0_PRELIM \ -(BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V) -#define CONFIG_SYS_BR1_PRELIM \ -(BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V) - -#define CONFIG_SYS_OR0_PRELIM 0xfff00010 -#define CONFIG_SYS_OR1_PRELIM 0xfff00010 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#if defined(CONFIG_RAMBOOT_PBL) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_HWCONFIG - -/* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR -/* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ - -/* Serial Port - controlled on board with jumper J8 - * open - index 2 - * shorted - index 1 - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) - -#define CONFIG_SYS_BAUDRATE_TABLE \ -{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) -#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) -#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE -#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 -#define CONFIG_SYS_FSL_I2C3_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 -#define CONFIG_SYS_FSL_I2C4_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 - -#define CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 - -#define CONFIG_SYS_I2C_GENERIC_MAC -#define CONFIG_SYS_I2C_MAC1_BUS 3 -#define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57 -#define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2 -#define CONFIG_SYS_I2C_MAC2_BUS 0 -#define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50 -#define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa - -#define CONFIG_RTC_MCP79411 1 -#define CONFIG_SYS_RTC_BUS_NUM 3 -#define CONFIG_SYS_I2C_RTC_ADDR 0x6f - -/* - * eSPI - Enhanced SPI - */ - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ - -/* controller 1, direct to uli, tgtid 3, Base address 20000 */ -#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull -#else -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 -#endif -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull -#else -#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 -#endif -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ - -/* controller 2, Slot 2, tgtid 2, Base address 201000 */ -#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull -#else -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 -#endif -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull -#else -#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 -#endif -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ - -/* controller 3, Slot 1, tgtid 1, Base address 202000 */ -#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull -#else -#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 -#endif -#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 -#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull -#else -#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 -#endif -#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ - -/* controller 4, Base address 203000 */ -#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull -#define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull -#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ - -/* Qman/Bman */ -#define CONFIG_SYS_BMAN_NUM_PORTALS 10 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#else -#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE -#endif -#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 -#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE -#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ - CONFIG_SYS_BMAN_CENA_SIZE) -#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 -#define CONFIG_SYS_QMAN_NUM_PORTALS 10 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull -#else -#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE -#endif -#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 -#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE -#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ - CONFIG_SYS_QMAN_CENA_SIZE) -#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 - -#define CONFIG_SYS_DPAA_FMAN -/* Default address of microcode for the Linux Fman driver */ -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 825KB (1650 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. - */ -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) - -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 -#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) - -#ifdef CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#endif /* CONFIG_PCI */ - -/* SATA */ -#ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SYS_SATA_MAX_DEVICE 2 -#define CONFIG_SATA1 -#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR -#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA -#define CONFIG_SATA2 -#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR -#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA - -#define CONFIG_LBA48 -#endif - -#ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_TBIPA_VALUE 8 -#define CONFIG_ETHPRIME "FM1@DTSEC4" -#endif - -/* - * Environment - */ -#define CONFIG_LOADS_ECHO /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ - -/* - * USB - */ -#define CONFIG_HAS_FSL_DR_USB -#define CONFIG_HAS_FSL_MPH_USB - -#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_EHCI_IS_TDI - /* _VIA_CONTROL_EP */ -#endif - -#ifdef CONFIG_MMC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define __USB_PHY_TYPE utmi - -#define CONFIG_EXTRA_ENV_SETTINGS \ -"hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ -"bank_intlv=cs0_cs1;" \ -"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ -"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ -"netdev=eth0\0" \ -"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ -"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ -"consoledev=ttyS0\0" \ -"ramdiskaddr=2000000\0" \ -"fdtaddr=1e00000\0" \ -"bdev=sda3\0" - -#define CONFIG_HDBOOT \ -"setenv bootargs root=/dev/$bdev rw " \ -"console=$consoledev,$baudrate $othbootargs;" \ -"tftp $loadaddr $bootfile;" \ -"tftp $fdtaddr $fdtfile;" \ -"bootm $loadaddr - $fdtaddr" - -#define CONFIG_NFSBOOTCOMMAND \ -"setenv bootargs root=/dev/nfs rw " \ -"nfsroot=$serverip:$rootpath " \ -"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ -"console=$consoledev,$baudrate $othbootargs;" \ -"tftp $loadaddr $bootfile;" \ -"tftp $fdtaddr $fdtfile;" \ -"bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ -"setenv bootargs root=/dev/ram rw " \ -"console=$consoledev,$baudrate $othbootargs;" \ -"tftp $ramdiskaddr $ramdiskfile;" \ -"tftp $loadaddr $bootfile;" \ -"tftp $fdtaddr $fdtfile;" \ -"bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT - -#include - -#endif /* __CONFIG_H */ -- 2.39.5